Vulcan Hart K6DTT Datasheet

Type
Datasheet

Vulcan Hart K6DTT is a direct steam, all-welded stainless steel, 2/3 jacketed counter tilting steam kettle with a 6-gallon capacity. It features an ellipsoidal bottom kettle liner formed and fully welded type 316 and type 304 stainless steel exterior with a butterfly-shaped pouring lip and embossed gallon/liter markings. The removable tilt handle has an insulated knob for safe and easy operation. The steam supply is controlled with a valve mounted in the right leg, and the condensate drain is through the left leg.

Vulcan Hart K6DTT is a direct steam, all-welded stainless steel, 2/3 jacketed counter tilting steam kettle with a 6-gallon capacity. It features an ellipsoidal bottom kettle liner formed and fully welded type 316 and type 304 stainless steel exterior with a butterfly-shaped pouring lip and embossed gallon/liter markings. The removable tilt handle has an insulated knob for safe and easy operation. The steam supply is controlled with a valve mounted in the right leg, and the condensate drain is through the left leg.

STEAM
P.O. Box 696
Louisville, KY 40201
Toll-free: 1-800-814-2028
Local: 502-778-2791
Quote & Order Fax: 1-800-444-0602
a division of ITW Food Equipment Group LLC
F-37451 (04/10)
Item # C.S.I. Section 11420
K6DTT
DIRECT STEAM COUNTER
2
3
JACKETED TILTING KETTLE
Model K6DTT
K6DTT 6 gallons/24 quarts/23 liters capacity
STANDARD FEATURES
Direct steam, all welded stainless steel,
2
3
jacketed
counter tilting steam kettle.
Ellipsoidal bottom kettle liner formed and fully welded type
316 and type 304 stainless steel exterior with
1
4
x
5
8
inch
bar rim with buttery shaped pouring lip and embossed
gallon/liter markings, designed to operate at a maximum
of 50 psi (3.4 kg/cm
2
).
Embossed gallon/liter markings.
Removable tilt handle with insulated knob.
Steam supply controlled with valve mounted in right leg
and condensated drain through the left leg.
One year limited parts and labor warranty.
OPTIONS
Correction facility package.
a. Security type tamper resistant fasteners with tack
welds.
Second year extended limited parts and labor warranty.
ACCESSORIES (Packaged & Sold Separately)
One piece lift-off stainless steel cover.
Tilting kettle strainer.
Kettle tables.
Kettle stand (see spec F-32474 or F-32603) with
ADAPTER-DIRECT.
Steam control assembly (line strainer, steam trap, safety
valve).
Single perforated stainless steel basket assembly.
SPECIFICATIONS
Direct steam, all welded stainless steel,
2
3
jacketed counter
tilting steam kettle. Vulcan-Hart Model No. K6DTT. Ellipsoidal
bottom kettle liner formed and fully welded type 316 and
type 304 stainless steel exterior with
1
4
x
5
8
inch bar rim
with buttery shaped pouring lip and embossed gallon/
liter markings, designed to operate at a maximum of 50 psi
(3.4 kg/cm
2
). Removable tilt handle with insulated knob.
Steam supply controlled with valve mounted in right leg and
condensated drain through the left leg.
Exterior Dimensions:
21
3
4
"w x 15
1
2
"d x 30
1
2
"h.
UL Classied for sanitation in accordance with ANSI/NSF
Standard #4. Meets ASME code.
P.O. Box 696
Louisville, KY 40201
Toll-free: 1-800-814-2028
Local: 502-778-2791
Quote & Order Fax: 1-800-444-0602
a division of ITW Food Equipment Group LLC
STEAM
F-37451 (04/10)
K6DTT
DIRECT STEAM COUNTER
2
3
JACKETED TILTING KETTLE
SERVICE CONNECTIONS
NOTE: In line with its policy to continually improve its products, Vulcan reserves the right to change materials and specications without notice.
Steam supply:
1
2
" IPS.
Condensate return:
1
2
" IPS.
NOTE
• Installationofbackowpreventers,vacuumbreakersandother
specic code requirements is the responsibility of the owner and
installer. It is the responsibility of the owner and installer to comply
with local codes.
• Thisapplianceismanufacturedforcommercialinstallationonly
and is not intended for home use.
DIRECT STEAM DATA
Steam supply to the kettles must:
1. Maintain a steady 10 psi ow under operating conditions.
2. Have a minimum ow (see chart) of dry steam.
3. Be adequately trapped to provide dry steam. (See ball oat trap.)
STEAM FLOW RATE AT 10 PSIG AT THE KETTLE
Time to boil
Fast Boil
12 minutes
Medium Boil
20 minutes
Stock Boil
30 minutes
lbs/hr kg/hr lbs/hr kg/hr lbs/hr kg/hr
6 gallons 32 18 21 10 14 6
15.1
(382)
11.8
(300)
19.6
(497)
14.4
(365)
27.7
(704)
8.5
(216)
11.4
(289)
14.1
(358)
4.4
(112)
8.4
(214)
10.0
(253)
27.6
(700)
26.2
(665)
11.2
(284)
15.0
(381)
7.5
(191)
2.6
(66)
MODEL TRUE WORKING CAPACITY 4 OZ. SERVINGS
K6DTT
6 gallons, 24 quarts
23 liters
192
  • Page 1 1
  • Page 2 2

Vulcan Hart K6DTT Datasheet

Type
Datasheet

Vulcan Hart K6DTT is a direct steam, all-welded stainless steel, 2/3 jacketed counter tilting steam kettle with a 6-gallon capacity. It features an ellipsoidal bottom kettle liner formed and fully welded type 316 and type 304 stainless steel exterior with a butterfly-shaped pouring lip and embossed gallon/liter markings. The removable tilt handle has an insulated knob for safe and easy operation. The steam supply is controlled with a valve mounted in the right leg, and the condensate drain is through the left leg.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI