Vulcan Hart 2T2036D is a two 2/3 jacketed tilting steam kettles on a cabinet base. The kettles have a 24-quart capacity each and are made of type 304 stainless steel. The kettles are mounted on a 28" high base cabinet with front full height doors, slip-off stainless steel side, and aluminized rear panel with 6" adjustable legs with flanged feet for anchoring. The kettles have a fully welded hemispheric bottom with a type 304 stainless steel jacket and type 316 stainless steel liner. The jacket is tested to 50 psi (3.4 kg/cm2) and requires 21 lbs./hr. of steam flow at 5-50 psi per kettle.
Vulcan Hart 2T2036D is a two 2/3 jacketed tilting steam kettles on a cabinet base. The kettles have a 24-quart capacity each and are made of type 304 stainless steel. The kettles are mounted on a 28" high base cabinet with front full height doors, slip-off stainless steel side, and aluminized rear panel with 6" adjustable legs with flanged feet for anchoring. The kettles have a fully welded hemispheric bottom with a type 304 stainless steel jacket and type 316 stainless steel liner. The jacket is tested to 50 psi (3.4 kg/cm2) and requires 21 lbs./hr. of steam flow at 5-50 psi per kettle.
Vulcan Hart 2T2036D is a two 2/3 jacketed tilting steam kettles on a cabinet base. The kettles have a 24-quart capacity each and are made of type 304 stainless steel. The kettles are mounted on a 28" high base cabinet with front full height doors, slip-off stainless steel side, and aluminized rear panel with 6" adjustable legs with flanged feet for anchoring. The kettles have a fully welded hemispheric bottom with a type 304 stainless steel jacket and type 316 stainless steel liner. The jacket is tested to 50 psi (3.4 kg/cm2) and requires 21 lbs./hr. of steam flow at 5-50 psi per kettle.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI