Viking Range Designer Stainless Steel Handle Kit - 41" Installation guide

Viking Range
Brand
Viking Range
Model
Designer Stainless Steel Handle Kit - 41"
Type
Installation guide
Viking Range Corporation
111 Front Street
Greenwood, Mississippi 38930 USA
(662) 455-1200
For product information,
call 1-888-VIKING1 (845-4641)
or visit the Viking Web site at
vikingrange.com
F20689 EN
(082009J)
Viking Installation Guide
DDHK41 Designer Handle Kit
For Use with DFRB5 All Refrigerators, DFFB5 All Freezers
and DFWB Built-In Wine Cellars
IMPORTANT–Please Read and Follow!
2 3
• Before beginning, please read these instructions completely and carefully.
• Use caution during assembly to minimize scratches.
• Do not remove permanently affixed labels, warnings or plates from the product. This may
void the warranty.
• Please refer to the DFRB5, DFFB5 and DFWB Installation Instructions for more information
on installing the door panel.
• The installer should leave instructions with the customer who should retain for local
inspector’s use and future reference.
Parts Included
Required Tools
Handle Installation
To Install:
Installation with Wooden Full Overlay
Custom Door Front
1. Locate the wooden custom panel.
2. Using the illustrations on the next page, layout the handle location on the panels. It is
recommended that masking tape be placed where the four holes will be drilled to help mark
the hole placement and to prevent any damage to the door when drilling the holes.
3. The Designer handle will be mounted using (4) of the #10 x 3/4” Hex head screws provided.
Using the 3/16”(0.5 cm) drill bit, drill completely through the door in the hole locations.
Using the 7/16” (1.1 cm) bit, counter-bore four holes 1/2” (1.2 cm) deep max. on the
BACKSIDE of the custom door panel.
4. Attach the Designer handle to the panel using (4) #10 x 3/4” screws provided.
Part Quantity
Designer Handles
#10 x 3/4” Hex Head Screws
Installation Instructions
(1)
(4)
Electric Drill
3/16” (0.5 cm) Drill Bit
7/16” (1.1 cm) Spade or Forstner Bit (Counterbore)
Tape Measure
Hex Head Screw Driver
Masking Tape and Pencil
A
A
13-1/8”
(33.3 cm)
13/16”
(2.1 cm)
38-19/32”
(98.0 cm)
1-1/2”
(3.8 cm)
Section A-A
36” Custom Door
DFRB All Refrigerator/DFFB All Freezer
(Front View)
Designer Handle
3/4” (1.9 cm)
Full Overlay
Panel
3/16” (0.5 cm)
Thru Hole
7/16” (1.1 cm)
Counter Bore x 1/2”
Depth (max)
13/16”
(2.1 cm)
Handle Installation
4 5
A
A
13-1/8”
(33.3 cm)
13/16”
(2.1 cm)
38-19/32”
(98.0 cm)
1-1/2”
(3.8 cm)
Section A-A
30” Custom Door
DFRB All Refrigerator/DFFB All Freezer
(Front View)
Designer Handle
3/4” (1.9 cm)
Full Overlay
Panel
3/16” (0.5 cm)
Thru Hole
7/16” (1.1 cm)
Counter Bore x 1/2”
Depth (max)
13/16”
(2.1 cm)
Handle Installation
13/16”
(2.1 cm)
1-1/2”
(3.8 cm)
15/32”
(1.2 cm)
A
A
23-13/16”
(60.5 cm)
38-19/32”
(98.0 cm)
Section A-A
3/4” (1.9 cm)
Full Overlay
Panel
3/16” (0.5 cm)
Thru Hole
7/16” (1.1 cm)
Counter Bore x 1/2”
Depth (max)
13/16”
(2.1 cm)
Specifications subject to change without notice.
Custom Door
DFWB Wine Cellar
(Front View)
Designer Handle
76
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Viking Range Designer Stainless Steel Handle Kit - 41" Installation guide

Viking Range
Brand
Viking Range
Model
Designer Stainless Steel Handle Kit - 41"
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents