Denso BHT-1700 Series User manual

Barcode/2Dcode

HandyTerminal

SoftwareUserʼsManual

SERIES

BHT-1700/1800BHT-1700/1800BHT-1700/1800

C

The copyright of this Reference Manual belongs to DENSO WAVE INCORPORATED.

BHT, QR Code, iQR Code, SQRC, and QBdirect are registered trademarks of DENSO WAVE INCORPORATED.

The Bluetooth

®

is a trademark owned by its proprietor. DENSO WAVE uses Bluetooth wireless

technology under license.

All other products and company names mentioned in this manual are trademarks or registered trademarks of their

respective holders. In this manual, all of trademarks are not marked with ™ or

®

.

- i -

Preface

This manual provides information and instructions for using software unique to BHT-1700/1800d (hereinafter

referred to as BHT) . Refer to the BHT-1700/1800 Hardware User's Manual for basic usage of the BHT, and the

API Reference Manual for software application development.

This manual applies to the OS versions described below.

Version

Description

OS version

1700

1800

1st

First issue

1.00.00

2nd

[ 1. Outline ]

Added correspondence column of Wireless charging to

compatible

model list

[ 3. Basic Operation ]

Added display function of package version

Changed the contents of system update error 1001

[ 5. Mobile Network ]

Added network device priority

[ 6. WLAN ]

Added network device priority

Added “Scan Interval”, “Select 5GHz Margin” to WLAN

parameter settings

[ 8. Wired LAN ]

Changed the Wired LAN device was always enabled

Added network device priority

[10. BHTShell ]

Added DNWA application

[12. ApplicationLauncher ]

Add description about internal whitelist

Add notes on whitelist

[13. Barcode Reading Settings ]

Added One shot mode to trigger mode

Changed the auto off time of the scanner to 10 seconds on 2D

long model

Added “Count unit”, “Separate method”, "Number" ,

"Separator"

to ADF settings

1.00.02

3rd

[3. Basic operation]

Change initialization screen to factory default state.

[5.2 SIM Card Management]

Add notes when installing SIM cards.

[6. WLAN ]

Added description about WLAN country code.

[6.3. WLAN Manager]

Added country code.

Changed so that parameters are saved immediately without

pressing save

button.

[6.3.6.10 Storing WLAN Settings Permanently]

Added description about setting xml file.

Added description about IP address duplication.

[12. ApplicationLauncher ]

Added a whitelist registration function (GUI) of applications

and screens

not to be displayed on the list screen.

Added the import/export function of the above whitelist to

review the

configuration of the application management screen.

1.00.03

4th

[3.7. Start-up Function]

Add "waiting time before application execution" to setting xml

file.

1.00.05

- ii -

[11.2.1. 1D/2D Reading]

Integrate barcode reading menu on the HardTest with one on

the ScanSetting

[13. Barcode Reading Settings ]

Added setting function of SQRC

5th

[3.7.1 Processing Flow]

Added screen display at Reboot.

1.00.07/1.00.07d

■ Note

Use the SDK version same as the OS version used for application development.

■ Abbreviations

BHT Handy Terminal produced by DENSO WAVE

CU Communication Unit

■ Related manuals

- BHT-1700/1800 Hardware User’s Manual

- BHT API Reference Manual

- BHT Browser For Android

- ADF Script User’s Guide for Android

- OCR Application Manual

- DeviceManagementSystem Manual

- BHT-1700/1800 SQRC Settings manual

Please download the BHT-1700/1800 Hardware User’s Manual separately.

Other manuals are in the SDK¥Manual folder of the OS / SDK package.

- iii -

■ For inquiry and latest information

For the latest information on this manual and DENSO WAVE products, visit the DENSO WAVE website at:

https://www.denso-wave.com/

More information is available from our special website "QBdirect:" for the registered users at: Visit the link above to learn

more about this site including user registration.

http://www.qbdirect.net/

- iv -

Customer Registration and Inquiries

Customer Registration

To allow us to provide our customers with comprehensive service and support, we request that all customers complete a

Member Registration form. Registered members will be offered the following privileges.

The latest upgrade information

Free exhibitions and event information for new products

Free web-information service "QBdirect"

"QBdirect" Service Contents

Information search service

(FAQ)

Offers detailed information on each product.

Download service

Offers downloads of repair modules for the latest BHT Series systems or software, and

sample programs.

E-mail inquiries

Product related queries can be sent by e-mail.

Please note that these privileges may be subject to change without prior notice.

 How to register

Access the URL below and follow the instructions provided.

http://www.qbdirect.net/

Inquiries

You can contact us at either of the following depending on contents:

 Technical inquiries (QBdirect)

BHT product programming method

Product set-up method, usage

Other technical questions

Inquires relating to the above can be made at our exclusive web site "QBdirect" for registered users.

Access the link below to log on or register.

http://www.qbdirect.net/

 General inquiries

Product price, quotation, dealer, and market channel

Repair, maintenance, service

Inquiries on product specifications

Consulting of application development and customization

As for the above inquires, contact the following.

Contact

Service

hours:

9:10 to 12:00, 13:00 to 17:30

(Excluding Saturdays, Sundays, national holidays, and DENSO WAVE’s long holidays in spring,

summer and winter)

Location:

CROSS PLACE Hamamatsucho 10F,1-7-6, Shibakoen, Minato-ku, Tokyo 150-0011, Japan

TEL:

0120-585-271 (Toll free)

- v -

Contents

1. Outline....................................................................................................................................... 1

1.1. Application Implementation Steps ................................................................................. 1

1.2. System Components ..................................................................................................... 2

1.2.1. Hardware Components ................................................................................................. 2

1.2.2. Software Components ................................................................................................... 4

1.2.3. Corresponding Model List ............................................................................................. 4

1.3. Usage Precautions ........................................................................................................ 5

2. Set-up of BHT ........................................................................................................................... 6

2.1. BHT Operations that Delete Data.................................................................................. 6

2.2. Support Functions for BHT Set-up ................................................................................ 7

3. Basic Operation ........................................................................................................................ 8

3.1. Power ON ...................................................................................................................... 8

3.2. Power OFF .................................................................................................................... 9

3.3. Suspend (Sleep) Resume ............................................................................................. 9

3.4. Hot Swapping ................................................................................................................ 9

3.5. System Update ............................................................................................................ 10

3.5.1. Execution of Update .................................................................................................... 10

3.5.2. Menu Button ................................................................................................................ 11

3.5.3. Settings ....................................................................................................................... 11

3.5.4. Error Code ................................................................................................................... 12

3.6. Resetting to the Factory Default (FactoryReset) and Enterprise reset ..................... 13

3.6.1. Resetting to the Factory Default (FactoryReset) ......................................................... 13

3.6.2. EnterpriseReset ........................................................................................................... 14

3.7. Start-up Function ......................................................................................................... 15

3.7.1. Processing Flow .......................................................................................................... 15

3.7.2. Setting xml File ............................................................................................................ 16

3.7.3. Applications to be Executed by Automatic Set-up (../Setup)....................................... 16

3.7.4. Broadcasting: System Setting Completed .................................................................. 17

3.7.5. Precaution on Start-up Function .................................................................................. 17

3.8. (Touch Panel) Screen .................................................................................................. 18

3.8.1. Brightness of Screen ................................................................................................... 18

3.8.2. Screen Rotation ........................................................................................................... 19

3.8.3. Sleep Settings on the Display ..................................................................................... 21

3.8.4. Character Size ............................................................................................................. 22

3.9. Battery Level Indication ............................................................................................... 23

3.10. Key .............................................................................................................................. 24

3.10.1. Key Layout .................................................................................................................. 24

3.11. Date and Time ............................................................................................................. 26

3.12. SNTP Function ............................................................................................................ 27

3.13. Language .................................................................................................................... 29

3.14. Phone .......................................................................................................................... 31

3.15. Sound and Volume ...................................................................................................... 32

3.16. Image Capture ............................................................................................................. 32

3.17. FileManager ................................................................................................................ 33

3.18. Data Communication through USB Connection .......................................................... 34

3.18.1. Connection procedure ................................................................................................. 34

3.18.2. Communication procedure .......................................................................................... 34

3.19. StatusBar ..................................................................................................................... 35

3.19.1. Status Icon ................................................................................................................... 35

3.19.2. Notification Icon ........................................................................................................... 36

3.20. Application List ............................................................................................................ 37

3.20.1. Applications Not Produced by DENSO WAVE ............................................................ 37

3.20.2. Applications Produced by DENSO WAVE .................................................................. 39

4. Keyboard ................................................................................................................................ 40

4.1. Selection of Software Keyboard .................................................................................. 40

4.2. Hard Keyboard IME (BHT-1700 only) ......................................................................... 42

4.3. Key Remap .................................................................................................................. 43

4.3.1. Assignment of Key code ............................................................................................. 43

4.3.2. Assignment of Shortcut ............................................................................................... 44

4.3.3. Clearing Assignment ................................................................................................... 45

- vi -

5.

Mobile Network (4G Model Only) ........................................................................................... 46

5.1. Network Device Priority ............................................................................................... 47

5.2. SIM Card Management ............................................................................................... 47

6. WLAN...................................................................................................................................... 48

6.1. WLAN Operation ......................................................................................................... 48

6.1.1. Connection to WLAN Network .................................................................................... 48

6.1.2. Manual WLAN Network Addition ................................................................................. 49

6.1.3. WLAN Settings ............................................................................................................ 50

6.1.4. WLAN Detailed Settings .............................................................................................. 51

6.1.5. Proxy Server Settings.................................................................................................. 51

6.1.6. Use of Static IP Address .............................................................................................. 52

6.1.7. Connection Using WPS ............................................................................................... 52

6.1.8. WLAN Network Settings Change ................................................................................ 53

6.1.9. WLAN Network Settings Reset ................................................................................... 53

6.2. Network Device Priority ............................................................................................... 53

6.3. WLAN Manager ........................................................................................................... 54

6.3.1. Start-up of WLAN Manager ......................................................................................... 54

6.3.2. STATUS ....................................................................................................................... 55

6.3.3. INFO ............................................................................................................................ 56

6.3.4. PING ............................................................................................................................ 57

6.3.5. Settings Button ............................................................................................................ 60

6.3.6. Menu Button ................................................................................................................ 61

6.4. WLAN Contry Code ..................................................................................................... 81

6.4.1. WLAN Country Code Setting ...................................................................................... 82

7. Bluetooth ................................................................................................................................. 83

7.1. Bluetooth Profile .......................................................................................................... 83

7.2. Turning ON Bluetooth .................................................................................................. 84

7.3. Renaming Bluetooth Device ........................................................................................ 86

7.4. Pairing Bluetooth Device ............................................................................................. 87

7.5. Unpairing Bluetooth Device ......................................................................................... 88

8. Wired LAN .............................................................................................................................. 89

8.1. Wired LAN Network Settings ....................................................................................... 89

8.2. Proxy Server Settings.................................................................................................. 89

8.3. Network Device Priority ............................................................................................... 89

9. NFC ......................................................................................................................................... 90

9.1. Communication Using NFC ......................................................................................... 91

10. BHTShell ................................................................................................................................. 92

10.1. Menu Configuration ..................................................................................................... 92

10.2. Agreement Screen ...................................................................................................... 93

10.3. Menu Button ................................................................................................................ 93

10.3.1. ABOUT ........................................................................................................................ 94

10.4. Details of Function ....................................................................................................... 94

10.4.1. Analytics ...................................................................................................................... 94

10.4.2. Power Tools ................................................................................................................. 94

10.4.3. Version ........................................................................................................................ 95

10.4.4. Regulatory Info ............................................................................................................ 96

10.4.5. Open Source Licenses ................................................................................................ 96

11. HardTest ................................................................................................................................. 97

11.1. Menu Configuration ..................................................................................................... 97

11.2. Input Device ................................................................................................................ 97

11.2.1. Scan 1D/2D Code ....................................................................................................... 97

11.2.2. NFC ............................................................................................................................. 97

11.2.3. Key .............................................................................................................................. 98

11.2.4. Touch Screen .............................................................................................................. 98

11.3. Display Device ............................................................................................................. 98

11.3.1. LCD ............................................................................................................................. 98

11.3.2. Backlight ...................................................................................................................... 99

11.4. Audio ........................................................................................................................... 99

11.4.1. Speaker ....................................................................................................................... 99

11.4.2. Receiver ...................................................................................................................... 99

11.4.3. Earphone ................................................................................................................... 100

11.4.4. Microphone ................................................................................................................ 101

11.5. Wireless Device ......................................................................................................... 102

11.5.1. GPS ........................................................................................................................... 102

- vii -

11.5.2.

E compass ................................................................................................................. 102

11.5.3. LAN............................................................................................................................ 103

11.6. Camera ...................................................................................................................... 103

11.6.1. Rear Camera ............................................................................................................. 103

11.6.2. Front camera ............................................................................................................. 103

11.6.3. Camera Flash ............................................................................................................ 104

11.7. RTC ........................................................................................................................... 104

11.7.1. RTC ........................................................................................................................... 104

11.8. Battery ....................................................................................................................... 104

11.8.1. Main Battery .............................................................................................................. 104

11.9. Sensor ....................................................................................................................... 105

11.9.1. G Sensor ................................................................................................................... 105

11.9.2. Geomagnetic Sensor................................................................................................. 105

11.9.3. Gyro Sensor .............................................................................................................. 105

11.9.4. Proximity Sensor ..................................................................................................... 106

11.9.5. Light Sensor .............................................................................................................. 106

12. ApplicationLauncher ............................................................................................................. 107

12.1. Start-up Screen ......................................................................................................... 107

12.2. Application monitoring ............................................................................................... 107

12.3. Initial Settings ............................................................................................................ 108

12.4. Home Screen (List Display Screen) .......................................................................... 109

12.5. User Mode ................................................................................................................. 109

12.5.1. Admin Mode .............................................................................................................. 110

12.5.2. Clear Recent Apps .................................................................................................... 110

12.5.3. About ......................................................................................................................... 110

12.6. Administer Mode ........................................................................................................ 111

12.6.1. User Mode .................................................................................................................. 111

12.6.2. Apps Settings ............................................................................................................ 112

12.6.3. Import/Export ............................................................................................................. 118

12.6.4. Options ...................................................................................................................... 119

12.6.5. System Settings ........................................................................................................ 122

12.6.6. Reset To Default ........................................................................................................ 122

12.6.7. BHT Shell .................................................................................................................. 123

12.6.8. Clear Recent Apps .................................................................................................... 123

12.6.9. About ......................................................................................................................... 123

12.6.10. Exit ....................................................................................................................... 123

12.7. Settings File (XXXXXX.xml) ...................................................................................... 124

12.7.1. ApplicationLauncher Settings File Example .............................................................. 124

12.7.2. Setting Value List ....................................................................................................... 125

12.8. Notes ......................................................................................................................... 126

12.8.1. Notes on Whitelist Registration ................................................................................. 126

12.9. Error Indication .......................................................................................................... 128

13. Barcode Reading Settings Menu .......................................................................................... 129

13.1. Readable Code Types ............................................................................................... 129

13.2. Functions ................................................................................................................... 130

13.3. Scan Settings ............................................................................................................ 132

13.4. Decode Settings ........................................................................................................ 135

13.4.1. Symbology Settings................................................................................................... 138

13.5. Notification Settings................................................................................................... 147

13.5.1. Notification Sound ..................................................................................................... 147

13.5.2. Notification Vibrator ................................................................................................... 147

13.5.3. Notification LED ......................................................................................................... 147

13.6. Data Edit Settings ...................................................................................................... 148

13.6.1. EAN-13 ...................................................................................................................... 148

13.6.2. UPC-A ....................................................................................................................... 148

13.6.3. EAN-8 ........................................................................................................................ 148

13.6.4. UPC-E ....................................................................................................................... 148

13.6.5. Code39 ...................................................................................................................... 149

13.6.6. Codabar ..................................................................................................................... 149

13.6.7. Interleaved 2 of 5 ....................................................................................................... 149

13.6.8. Standard 2 of 5 .......................................................................................................... 149

13.6.9. SQRC ........................................................................................................................ 149

13.6.10. Advanced Data Formatting (ADF) ....................................................................... 150

13.7. Output Settings .......................................................................................................... 151

- viii -

13.7.1.

Key Input ................................................................................................................... 151

13.8. Management of Setting Values ................................................................................. 152

13.8.1. Storing Set Value Permanently ................................................................................. 152

13.8.2. Programming ............................................................................................................. 153

13.9. Test ............................................................................................................................ 154

13.10. Information ................................................................................................................ 158

14. Touch Trigger ....................................................................................................................... 159

14.1. Function ..................................................................................................................... 159

14.1.1. Start/Stop ................................................................................................................... 159

14.1.2. Trigger Button Fixing ................................................................................................. 160

14.1.3. Settings ..................................................................................................................... 160

14.1.4. Menu Button .............................................................................................................. 160

15. Log Manager ......................................................................................................................... 161

. Appendix I .................................................................................................................................... 165

- 1 -

1. Outline

1.1. Application Implementation Steps

The following steps describe a typical process from purchase of a BHT to implementation of a business application

using the BHT.

S

tep 1: Confirm that the BHT works properly. (Refer to the Operator’s Guide or Hardware User’s Manual.)

↓

Step 2: Determine a set-up procedure considering the application environment and develop applications for the BHT.

Refer to"2 Set-up of BHT" in this manual for how to set up the BHT.

Refer to the “API Reference Manual” for how to develop applications.

↓

Step 3: Prepare a manual that explains how to set up the BHT and how to use the applications created.

↓

Step 4: Set up the BHT basic configuration (common settings) by following instructions in this manual.

↓

Step 5: Set up the environment-dependent configuration (such as an IP address).

↓

Step 6: Start operations.

- 2 -

1.2. System Components

This section illustrates the hardware and BHT software components required for the BHT barcode data collection

system.

1.2.1. Hardware Components

In addition to the BHT, the following hardware and software are required for the BHT barcode data collection system.

The required hardware varies depending on the type of communication used.

[1] BHT-1700

* Please refer to the BHT-1700 Hardware User’s Manual for information such as model number.

CU-1233

- 3 -

[2] BHT-1800

* Please refer to the BHT-1800 Hardware User’s Manual for information such as model number.

- 4 -

1.2.2. Software Components

[1] BHT operating system (OS)

Android7.1.2

[2] Application program development environment

Refer to the BHT API Reference Manual.

1.2.3. Corresponding Model List

BHT-1700/1800 series have various options by model as shown in the table below.

Please check the options of your model and refer to the next chapter and subsequent for supported functions.

Content

Value

Description

Barcode

1D

1D module mounted

2D

2D module mounted

2D Long

2D long range module mounted

Gunglip trigger mounted

Camera

Rear

Rear camera mounted

Rear/front

Both rear and front camera mounted

–

Not mounted

Others

✓

Mounted

–

Not mounted

Model

Barcode

LTE/GPS

NFC

Microphone/

receiver

Earphones

ALS/

proximity

sensor

Camera

Keyboard

Wireless

charging

BHT-1700BWB-1-A7

1D

–

✓

BHT-1700QWB-1-A7

2D

–

✓

BHT-1700QWB-2-A7

2D

–

✓

–

✓

Rear

✓

BHT-1700QWBG-1-A7

2D

✓

–

✓

–

✓

–

✓

BHT-1700QWBG-2-A7

2D

✓

–

✓

Rear

✓

BHT-1800QWB-1-A7

2D

–

✓

–

Rear

-

BHT-1800QWB-2-A7

2D

–

✓

Rear/front

-

BHT-1800QWB-3-A7

2D

–

✓

Rear/front

-

✓

BHT-1800QWBG-1-A7

2D

✓

–

✓

Rear

-

BHT-1800QWBG-2-A7

2D

✓

–

✓

Rear/front

-

BHT-1800QWBG-3-A7

2D

✓

Rear/front

-

✓

BHT-1700QLWB-P-A7

2DLong

–

✓

- 5 -

1.3. Usage Precautions

■ Data backup

Non-volatile memory (flash memory) is used to store user data for the BHT. Flash memory has a finite number of

program-erase cycles, therefore frequent access concentrated on the specific memory area may lead to data loss.

To optimize the flash memory usage, the wear leveling function, which automatically distributes data evenly over the

flash memory, is implemented for the BHT. Nevertheless, backing up important data is strongly recommended in order

to prepare for unexpected data loss.

■ Flash memory in consideration of writing lifetime

Flash memory reaches the end of its lifetime as the number of writes increase.

Application development must follow the restrictions listed below in order to prolong the flash memory lifetime.

- Limit the data size written in the flash memory to maximum 100 M bytes per day.

- Limit the write cycles to maximum 5,000 times per day for data smaller than 8 k bytes.

■ Rechargeable battery

All data including data stored in the BHT RAM, data being edited, and setting information may be lost if the BHT is left

with the drained battery, if the BHT is left for a long period with the battery removed, or if the battery is incorrectly

replaced. By executing the factory reset and Enterprise Reset, all data in the BHT Flash such as file data, and setting

information will be erased. (Refer to “3.6

Resetting to the Factory Default (FactoryReset) and Enterprise reset ”.)

Therefore, backing up any important data in your PC is strongly recommended.

■ Ensuring stable operations by the periodical resetting

Android may cause memory leaks (insufficient memory) when used over long periods.

Resetting the BHT regularly (power off to on, or Reboot) in the application created (once a day etc.) or as daily routine

is recommended for ensuring stable BHT operation.

For example, call a reset function in the application at the end of daily work or at scheduled update. Refer to the BHT

API Reference Manual for how to program a reset function.

- 6 -

2. Set-up of BHT

This chapter explains how to set up the BHT efficiently and effectively.

2.1. BHT Operations that Delete Data

The data stored in the BHT is deleted after the following operations. In order to ensure stable operations, the BHT must be

set up to restore or recover the deleted data.

Operation

Description

Suspend/resume

-

Power OFF/ON

Deletes information on an action in operation.

Sypstem update

(Upgrading vesion)

Deletes information on an action in operation.

System update

(Downgrading version)

Deletes information on an action in operation and setting of pre-installed application

produced by DENSO WAVE

.

Enterprise reset

Delete information other than StartupSetting folders and SD cards for users.

Data initialization

Deletes information other than SD cards.

Refer to the table below for data existence in memories when executing the above operations.

Suspend/

resume

Power

OFF/ON

System

update

(Upgrading

version)

System

update

(Downgrading

version)

Enterprise reset

Data

initialization

Data in the microSD card

folder

✓

Data in the Flash

✓

-

StartupSetting folder *3

✓

-

Pre-installed application

produced by DENSO WAVE

✓

Application to be installed by

user

✓

-*2

Setting of pre-installed

application produced by

DENSO WAVE

✓

-*1

-

Setting of application to be

installed by user

✓

-

RAM (Information on an

action in operation)

✓

-

✓: Data retained

–: Data erased

*1 It is recommended to export the setting of functions that can be exported in advance and back up it .

*2 It can be re-installed automatically using the BHT set-up supporting function. For details, refer to the next section and subsequent.

*3 StartupSetting folder (Internal shared storage/StartupSettingsData/Startup) for user

- 7 -

2.2. Support Functions for BHT Set-up

The BHT provides the following support functions to easily accomplish the set-up.

Functions or tools

Outline

1

Start-up function

This function installs user application of folder in the specific folder and

runs a specified application at the Enterprise reset and when resetting.

For details, refer to “3.7 Start-up Function”.

2

Enterprise reset

This function backs up files for setting (such as application, xml

）

stored

in the specific folder. It also installs a user application in the specific

folder, runs a specific application, and imports the setting of specific

device automatically after resetting to the factory default. For details of

the operation procedure of Enterprise reset, refer to “

3.6 Resetting to the

Factory Default (FactoryReset) and Enterprise reset ”.

Functions to import/export setting values of BHT special devices and applications

1

Reading

This function imports/exports the read setting value. For details, refer to

"13.8 Management of Setting Values".

2

Wireless

This function imports/exports the wireless setting value. For details, refer

to "6.3.6.5 Import/Export".

3

Application Launcher

This function imports/exports the setting value of application launcher.

For details, refer to "12.4.3 Import/Export",

- 8 -

3. Basic Operation

3.1. Power ON

Press and hold the power key ( ) on the upper right of the device to turn ON the BHT.

BHT is turned ON after the splash screen is displayed. Then, the lock screen is displayed.

Swipe the lock screen upward to display the home screen.

Lock screen Home screen

− Point −

If a battery cover is not fixed to the right position, the BHT will not be turned on.

Do not keep pressing the power key more than needed or press it too hard.

This may damage the power key or the BHT main body.

- 9 -

3.2. Power OFF

If the power key ( ) is pressed and held for 1 second or more, the following pup-up menu will appear. When “power OFF”

is tapped, the BHT is turned OFF (in the shutdown state). If you would like to turn ON the BHT after that, power ON the

BHT following the instruction in "3.1. Power ON”.

If you tap “Reboot” and tap “OK” displayed on the pup-up screen, the BHT is turned OFF in the same manner when

“power OFF” is tapped, and then starts up automatically.

– Note –

Note that data which are not saved in the storage, such as the internal storage and SD card may be

erased. If you are using a user application, finish the operation, and then tap “power OFF” or

“Reboot”.

3.3. Suspend (Sleep) Resume

If the power key ( ) is pressed swiftly or if any operation is not done during the sleep time that has been set, the BHT will

be transferred to the suspend (sleep) state. To resume the BHT, press the power key (

) swiftly.

3.4. Hot Swapping

BHT-1700 and BHT-1800 apply to the “hot swapping” function that enables the battery change without rebooting BHT.

Before using the hot swapping function, be sure to check the followings.

- A new battery must be charged sufficiently.

- A back-up battery must be fully charged.

If the backup battery is not fully charged, when you remove the battery cover, the blue LED and the red LED light up at

the same time (the LED looks purple). In this case, please replace the battery after replacing the battery, attaching the

battery cover, and after the backup battery is fully charged.

Implement the hot swapping in accordance with the following procedure.

[1] If it is not in the suspended state, press the power key for a short time to suspend the BHT.

[2] Remove a battery cover. The screen display becomes OFF and the red LED is turned ON.

[3] Wait until the red LED is turned OFF. (*1)

[4] Change batteries. (*2)

[5] Attach the battery cover.

[6] Press the power key to resume the BHT.

− Note −

The hot swapping function cannot be used in 3 minutes after the power is ON.

– Point –

(*1) If the red LED is not turned OFF even if you wait for more than 60 seconds, attach the battery

cover without changing batteries. Implement the hot swapping later.

(*2) The state when the hot swapping can be implemented is kept for 1 minutes after the battery is

removed with the back-up battery fully charged. If a battery is changed after 1 minutes or more

have passed or when the back-up battery is not fully charged, the hot swapping may be failed. In

this case, the power will be OFF (in the shutdown state) and the BHT will reboot next time the

power key is pressed.

Page is loading ...

Denso BHT-1700 Series User manual

Denso BHT-1700 Series User manual

Related papers

Other documents