Kmart 42473558 User manual

Type
User manual
1
Keycode: 42473558
Important Safety Guideline
Please read, understand and follow all instructions prior to using.
To enhance the enjoyment of your sofa bed and protect the safety of the operator
using the product, ALWAYS STRICTLY OBSERVE the following important
safety points:
1. WARNING: Keep away from fire. Do not place the sofa bed against or near
any open flames, heaters, furnaces or other hot objects.
2. WARNING: This product is not a flotation device. Do not use near or on
water.
3. WARNING: Do not obstruct the air passage opening or insert any objects into
the opening at any time.
4. WARNING: Keep pets away from the sofa bed. Pets may tear or puncture the
sofa bed.
5. IMPORTANT: Use only in dry conditions or under cover. Keep flocked
surface dry to avoid damage.
6. IMPORTANT: Make sure the area is flat, smooth, even and free of sharp
objects that can puncture the sofa bed. Do not set up the sofa bed near to stairs,
doors, drops, sharp edges or breakables.
7. IMPORTANT: To minimize any chance of rolling, tipping or swaying,
avoid sleeping on the edge of the sofa bed. Edges provide less support than the
middle of the Sofa bed.
Multi-functional Sofa Bed Instruction Manual
2
Inflation
1. Unfold your product and lay flat. Make sure the flocked side is upturned
during the inflation.
2. You can use an electric pump (not included) to inflate the sofa bed. See
below Fig (1).
TIP: How to use the 2-in-1 inflatable valve
Pull out the base valve from the main chamber, open the top stopper of
the valveSee A.
Insert the inflation hose and inflate the chamberSee B. Once inflation is
finished, insert the top stopper to the base valveSee C.
WARNING: Do not use air compressor or high pressure pumps. Do
not over inflate: excessive inflation of the air chambers can cause the
chamber to burst or cause damage to the welding seams.
3. You can achieve the following five functions:
A) Cushion Sofa bedInflate all the three chambersyou can use as a
cushion sofa bed. See the Fig 2.
B) Double sofaStack the front part and then plug the buttons on the back
side, regulate the length of buckle. You can assemble as a sofa couch,
see the Fig 3.
Fig.1
A
B
C
3
C) LoungeTurn over the Fig.2, you can use as a Lounge. See the Fig 4.
D) Unfold double Sofa bedDeflate the back support chamber, you can
use as a double sofa bed. See the Fig 5.
E) Fold double Sofa bedTurn up the sofa bed front part that without back
support, and then clip the buckle together and adjusts the length of the
straps. See the Fig 6.
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
4
Deflation
Pull out the base valve from the bed (C), open the cover (B) and take out
the stopper to release air (A). Do not to puncture your Sofa bed. Do not
force air out of the Sofa bed. Allow air to escape slowly and naturally. Fold
carefully and re-insert into the package. See below illustration!
Storage and Maintenance
1) Wipe clean with a damp cloth, then dry in the shade. Fold it into the original
package and store indoors. Do not use abrasive cleaning products. Do not
leave product exposed under direct sunlight as it will shorten the lifespan of
product.
2) Fold the sofa bed loosely and avoid sharp bends, corners and creases which
can damage the sofa bed.
3) Do not store in an area where it is likely to be exposed to extreme
temperatures.
Repair Patch Instructions
Small pinhole and small puncture leaks can be repaired with the included repair patch
a) Locate the leak.
b) Deflate the sofa bed.
c) Clean the area surrounding the leakage.
d) Take out the repair patch, cut it into required shape and size, put the patch over the
leak and press firmly.
e) You can use it again 30 minutes after repairing.
If the damage is bigger than 1 (2.5cm), we recommend using a Silicone or rubber
based glue for repair. Please read warning statement on glue prior to use.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Kmart 42473558 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI