We hope you enjoy your new purchase!
If you have any questions regarding this product or the instructions
Please call Achim’s Family of Home Furnishings
Customer Service at 1-800-54-ACHIM
Visit our website at www.achimonline.com
Made in China
V-18
Safety instructions
The airbed is designed for home use.
The airbed must not be used as a trampoline - risk of damage.
Take care with sharp objects and uneven surfaces – risk of damage.
Always place a tarpaulin between floor and airbed for ideal protection.
Check for seal tightness before use.
This inflatable product is not designed for use in water and must not be used as a
buoyancy aid for children or non-swimmers!
General information:
Every airbed may lose some of its air over time. The amount of air loss depends on
the material, environmental factors and intensity of use. This is not a flaw in the
material but a normal process with this type of material. Please replenish air as
required.
Operating instructions:
Inflation
1. Unfold your product and lay flat. Make sure the flocked side is upturned during
the inflation.
2. You can use foot or hand pump (not included) to inflate the airbed.
TIP: How to use the 2-in-1 inflatable valve
Pull out the base valve from the main chamber, open the top stopper of the valve
（See A）.
Insert the inflation hose and inflate the chamber（See B）. Once inflation is finished,
insert the top stopper to the base valve（See C）.
WARNING: Do not use air compressor or high pressure pumps. Do not over
inflate: excessive inflation of the air chambers can cause the chamber to burst
or cause damage to the welding seams.
Deflation
Pull out the base valve from the bed (C), open the cover (B) and take out the stopper
to release air (A). Do not to puncture your Airbed. Do not force air out of the Airbed.
Allow air to escape slowly and naturally. Fold carefully and re-insert into the
package. See below illustration!
Instructions for use:
Please transport the airbed with care. Avoid abrasive contact with walls and floors
(risk of damage). Improper use (breaking or tearing the material) will result in loss of
warranty.
Repairs:
A self-adhesive repair patch is included to repair small punctures or tears. Clean the
damaged area, remove the paper from the repair patch and press the patch onto the
damaged area without creating air bubbles. For larger repairs you can buy a repair kit
for PVC inflatable items at specialist dealers.
Cleaning and storage:
After use, the airbed must be cleaned of dirt using a (damp) cloth. Use a mild
detergent for cleaning if necessary. Do not scrub. Then leave to dry in the air before
completely deflating all chambers. Now fold up the airbed and store it in a dry,
frost-free location. When folding up make sure there are no severe kinks in the
material.
-
1
-
2
-
3
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Intex 64757E Owner's manual
-
-
JILONG JL027274NG Datasheet
-
Intex Queen Raised Downy Bed Owner's manual
-
Intex 64417E Owner's manual
-
Coleman 20090924 Owner's manual
-
-
-
-