Qazqa WARRIOR User manual

(NL) Gebruikte symbolen

(GB) Safety Precautions / (FR) Symboles utilisés / (DE) Verwendete Symbole / (PL) Stosowane symbole / (NO) Brukte symboler /

(DK) Brugte symboler / (SE) Anuända symboler / (FI) Käytetyt symbolit ./ (IT) Simboli usati / (ES) Simbolos empleados

(CZ) Použité symboly / (PT) Símbolos uilizados / (GR)

Max. ø45mm

E27 Max. 40W

IP20

220-240V~

50Hz

Warrior HL Black

94848

1. Switch off the main power supply.

2. Insert and close the ends of the chain

to the ceiling rose and the lamp shade as

shown in the picture on the left.

3. and 4. Use screws to mount the bracket

on the ceiling.

5. Connect the electrical cable of the lamp

with the mains wire.

6. Screw the side screws provided with

the ceiling rose to mount the ceiling rose

on the bracket.

7. Use an E 27 threaded bulb on the

lamp holder to light the lamp.

120 cm

38 cm

46 cm

11.5 cm