2. Qazqa
  3. WARRIOR

Qazqa WARRIOR User manual

  • Hello! I've reviewed the user manual for the Luminaire Warrior HL Black. This document includes important safety precautions, installation steps, and information about the lighting fixture's features, such as the specific bulb type and how to connect the wiring. I'm ready to answer your questions about this product.
  • Who should install the luminaire?
    What should be done before any installation or maintenance?
    What type of bulb should be used?
    Can the luminaire be dimmed?
(NL) Gebruikte symbolen
(GB) Safety Precautions / (FR) Symboles utilisés / (DE) Verwendete Symbole / (PL) Stosowane symbole / (NO) Brukte symboler /
(DK) Brugte symboler / (SE) Anuända symboler / (FI) Käytetyt symbolit ./ (IT) Simboli usati / (ES) Simbolos empleados
(CZ) Použité symboly / (PT) Símbolos uilizados / (GR)
¡
Max. ø45mm
E27 Max. 40W
IP20
220-240V~
50Hz
Warrior HL Black
94848
1. Switch off the main power supply.
2. Insert and close the ends of the chain
to the ceiling rose and the lamp shade as
shown in the picture on the left.
3. and 4. Use screws to mount the bracket
on the ceiling.
5. Connect the electrical cable of the lamp
with the mains wire.
6. Screw the side screws provided with
the ceiling rose to mount the ceiling rose
on the bracket.
7. Use an E 27 threaded bulb on the
lamp holder to light the lamp.
3
4
5
6
2
2
7
5
120 cm
38 cm
46 cm
11.5 cm
/