urban ambiance UQL1461 Installation guide

Brand
urban ambiance
Model
UQL1461
Type
Installation guide

The urban ambiance UQL1461 is a light fixture that can be used to provide ambient lighting in a variety of settings. It is designed to be mounted on a ceiling and comes with all the necessary hardware for installation. The fixture has a gilded bronze finish and features two A19 medium base sockets that can accommodate up to 60W bulbs each. Vintage bulbs are recommended for use with this fixture, but they are not included. The fixture also comes with four glass panels that can be used to create a variety of lighting effects.

The urban ambiance UQL1461 is a light fixture that can be used to provide ambient lighting in a variety of settings. It is designed to be mounted on a ceiling and comes with all the necessary hardware for installation. The fixture has a gilded bronze finish and features two A19 medium base sockets that can accommodate up to 60W bulbs each. Vintage bulbs are recommended for use with this fixture, but they are not included. The fixture also comes with four glass panels that can be used to create a variety of lighting effects.

1of2
Package Contents
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.
Crossbar
Assembly
x1
Glass Holder
x4
Fixture Body
x1
Pleasegoto forproductcleaningtips.Gotothe selection.
(2)A19MediumBasebulbs60WMaximum,MediumBaseVintageBulbsarerecommended,bulbsnotincluded.
30-45minutes
Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagramsbelowtoensureallpartsare
present.Ifanypartsaremissingordamaged,donotattempttoassemble,install,oroperatethefixture.Contactyouroriginalplaceofpurchase.
www.quoizel.com Care + Maintenance
LightSource:
EstimatedAssembly Time:
Preparation:
ToolsRequired:Flatheadscrewdriver,Phillipsscrewdriver,pliers,wirecutters,wirestrippers,electricaltape,safetyglasses.
A
Rectangle
Glass
Panel
x4
C
B
D
E
Square
Glass
Panel
x1
(Step 2 Continued)
ball.
D. Remove the mounting ball and the ceiling canopy. Tighten the lock
washer and the hex nut against the crossbar to secure in place.
STEP 1 Remove Cage from the Fixture Body-
A. Unlock lock screws and remove cage from the Fixture Body (B).
Figure 1
Lock Screw
Cage
Ceiling Canopy
STEP 2 -Install the Crossbar Assembly to Outlet Box and Adjust
the length of the Nipple
A. Attach the Crossbar Assembly (A) to the outlet box with the head of
the green ground screw facing you. Secure it with outlet box screws
(not included), tighten until snug
B. Remove the mounting ball from the Crossbar Assembly (B). Adjust
the hex nut and lock washer underside of the crossbar to the middle
of the nipple.
C. Place the ceiling canopy over the end of the nipple against the
ceiling to determine the correct position of the nipple. Thread the
mounting ball onto the nipple. Adjust the nipple to allow the ceiling
canopy to rest against the ceiling when held in place by the mounting
.
Outlet Box Screw
(not included)
Hex Nut and
Lock Washer
Outlet Box
Green Ground Screw
Nipple
A
Ceiling Canopy
Mounting Ball
Figure 2
STEP 3 - Wire Connections
A. Wrap bare or green ground wire around green ground screw on the
crossbar, no less than 2 inches from the end of the wire. Tighten the
green ground screw.
B. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
Green Ground Screw
on the Crossbar
White wire
from outlet box White wire
from fixture
Black wire from
outlet box (or Red)
Black wire
from fixture
Bare, or Green
Ground wire
from outlet box
Ground wire
from Fixture
Figure 3
Installation Instructions: UQL1461
www.urbanambiance.com
2of2
STEP 4 - Install the Ceiling Canopy
A. Place the ceiling canopy over the end of the nipple and secure with
previously removed mounting ball. Hand tighten until snug.
Nipple
Ceiling Canopy
Outlet Box
Mounting Ball
Figure 4
STEP 5 - Install Glass Panels
A. Place the Square Glass Panel (D) in to the bottom of the cage.
B. Locate Glass Holders (C) onto four edges of the Square Glass
Panel (D).
C. Locate Rectangle Glass Panels (E) onto Glass Holders (C). Secure
by folding tabs in the cage to the top
edge of Rectangle Glass Panels (E).
Rectangle Glass Panels (E)
E
D
C
Cage
E
C
D
Figure 5
Tab
STEP 6 - Install Bulbs and Cage with Glass Panels
A. Insert bulbs onto sockets and screw snugly into place.
B. Lift the cage with glass panels upward and attach the cage to the
ceiling canopy. Secure by threading previously removed lock
screws onto the cage and ceiling canopy. Hand tighten until snug
with screwdrivers.
Your fixture is now assembled and ready to use. Enjoy!
Figure 6
120V60W
120V60W
Cage with
Glass Panels
Lock Screw
Ceiling Canopy
Vintage Bulb
(recommended
but not included)
Socket
FINISH: GILDED BRONZE
NOTE: ALL DIMENSIONS ARE ROUNDED UP
TO THE NEAREST 1/4"
5.75”
12.25” 12.25”
www.urbanambiance.com
UQL1461
  • Page 1 1
  • Page 2 2

urban ambiance UQL1461 Installation guide

Brand
urban ambiance
Model
UQL1461
Type
Installation guide

The urban ambiance UQL1461 is a light fixture that can be used to provide ambient lighting in a variety of settings. It is designed to be mounted on a ceiling and comes with all the necessary hardware for installation. The fixture has a gilded bronze finish and features two A19 medium base sockets that can accommodate up to 60W bulbs each. Vintage bulbs are recommended for use with this fixture, but they are not included. The fixture also comes with four glass panels that can be used to create a variety of lighting effects.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents