2. rollease acmeda
  3. Chainhold

rollease acmeda Chainhold Installation guide

  • Hello! I have read the Chainhold Assembly & Installation Manual and am ready to answer your questions. This document explains how to assemble, install and mount Chainhold, including different mounting options and steps for chain tensioning.
  • What is the first step in assembling the Chainhold?
    What is the first step in installing the Chainhold?
    What are the additional mounting options?
Chainhold | Assembly & Installation Manual | v1.0
2024© Copyright All Rights Reserved Rollease Acmeda
ASSEMBLY
INSTALLATION
CHAINHOLD | ASSEMBLY & INSTALLATION MANUAL
1. Place bead chain on the bottom
groove of the Chainhold base.
2. Snap cover onto the base.
3. Pull the chain out of the groove.
1. Pull the Chainhold down until the
chain is fully tensioned (plunger will
be fully raised).
2. Mark screw hole locations.
3. Screw device into wall.
1. With provided screws, install bracket
first with large screws (use Chainhold
marked screw hole locations as
reference).
2. Install Chainhold into bracket with
small screws.
ADDITIONAL MOUNTING OPTIONS
OUTSIDE MOUNT
SIDE MOUNT
FLOOR MOUNT
1.
1.
1. 2.
2.
2. 3.
3.
1.
1.
2.
2.
/