2. Ranger design
  3. 5040

Ranger design 5040 Installation guide

  • I've reviewed the installation guide for the Ranger Design 5040 Cab Box and I am ready to assist you with your questions about its installation. The document covers assembly, regular installation, and accessory installation, along with the necessary safety precautions and required tools.
  • What should be done before installation?
    What safety gear is required for installation?
    What tools are required for the install?
INSTALLATION GUIDE
5040 Cab box
For virtual Install Guide, scan the QR code or visit:
https://rangerdesign.com/products/van-cab-
storage-box/
REQUIRED ITEMS
1 PERSON
1.1 Setup............................................................................................................................................... 3
QUICK START GUIDE
Phase 1 - Assembly
Phase 2 - Installation
2.1 Regular Install.................................................................................................................................4
2.2 Accessory Install............................................................................................................................4
Cordless Impact
Tape Measure
3/8" Socket
1/2" Socket
SAFETY INSTRUCTIONS
WARNING
•Before the installation, carefully read the supplied installation guide to avoid possible injuries and dam-
ages resulting from incorrect installation. Always keep the installation guide in an accessible location at
all times for reference during installation.
•Installers must always wear appropriate safety gear during installation. This may include but is not limit-
ed to gloves, steel toed shoes, and safety glasses.
CAUTION
•Follow all vehicle manufacturer instructions before attempting any installation.
•To prevent rust and other damages, do not drill into the factory fl oor panels.
•Before drilling for the tapping inserts, use a drill stop collar to prevent accidental drilling the van met-
al fl oor panel which may result in damage to components underneath, such as wiring harnesses, fuel
tanks and battery modules.
For technical support, contact us at 1-800-565-5321 5040 Installation Guide | REV. D1 | Page 2
For technical support, contact us at 1-800-565-5321
5040 Installation Guide | REV. D1 | Page 3
PHASE 1 – ASSEMBLY
1.1 SETUP
Item No. Description Qty.
5040 Cab box 1
96-5007 Install Fastener KIt 1
bILL oF MaTERIaL
1.1.1 Unpack components; compare with the bill of materials.
For technical support, contact us at 1-800-565-5321
5040 Installation Guide | REV. D1 | Page 4
PHASE 2 – INSTALL
2.1 NO 5041 INSTALL
PHASE 2 – INSTALL
2.2 ON 5041 INSTALL
HARDWARE USED
4×
TOOLS
qCordless Impact
q3/8" Driver Bit
#92-100 Screw #14 × 3/4"
2.1.1 Place and screw your 5040 cab box on a flat surface.
2.2.1 Attach the 5040 cab box on top of 5041 brackets.
NOTE: 5041 separate unit.
NOTE: You need 5041 for Ford Transit 5040 cab box install.
#90-212 Hex Bolt 5/16" × 1-1/4"
#98-122 Lock Washer
#98-116 Flat Washer
#94-132 Plusnut
HARDWARE USED
4× ThIs haRdwaRE Is In 5041
TOOLS
qCordless Impact
q1/2" Driver Bit
“You have successfully installed your Cab Box
Thank you for doing business with us.”
For any feedback or suggestions you may have, please contact: cs@rangerdesign.com
/