Protocol 5872-3EC Jet Plane 3D Puzzle User manual

Protocol
Brand
Protocol
Model
5872-3EC Jet Plane 3D Puzzle
Type
User manual
AGES
+
6
Instruction Manual for
Monster Race
Jet Plane 3D Puzzle
PARTS
ASSEMBLY
Read through this entire instruction manual
BEFORE using Monster Race Jet Plane
3D Puzzle.
We’re dedicated to bringing you well-designed
products that make living fun and easy. We stand
behind all our products and warrant this to be free
from defects in workmanship and materials for 30
days from the date of purchase.
For service claims or questions please consult our
website ProtocolNY.com.
Images may vary from actual product
Note: Make sure all pieces
are pressed in all the way
in order to securely
interlock and leave room
for later pieces.
Insert piece A1 through piece D2, and
interlock slot in A1 with slot in piece B1.
Bend piece D18 so it curves slightly
and attach to structure from step 17.
A1 + B1+ D2
+ X
+ C8
+ D10 + D10
+ W
Push the two rear wheels W
onto the spokes of the motor.
+ D12 + D12
+ C14
Connect the piece from step 1
with pieces D3 on either side.
Add piece D4 to top.
+ D3 + D4
Attach pieces D5 and D6 to A7.
+ D5 + D6 +A7
+ B7
+ C11 + C11
Bend pieces A15 and B15 so they
curve slightly. Attach pieces to structure.
+ A15 + B15
+ D16 + D16
+ D18
+ D19 + D19
+ C9 +C9
+ C20 + C21
Push pieces A23 and B23
onto structures from step 20.
Push pieces onto the closest
possible notch.
+ A23 + B23
Attach pieces A24 and B24 around
structure from step 21. Use all 16 pieces.
+ A24 + B24
Attach completed structures from step 22
onto the body of the structure from step 18.
+ B20 + C20
+ A25 + B25
+ A27 + B27
Join pieces D28 and D29 to make
a pair of structures. Attach structures
to pieces A30 and B30.
+ D28 + D29 + A30 + B30
+ A30 + B30
Built stand structure to hold plane.
+ C31 + C32
Add plane to stand. The puzzle is finished.
Remove from stand and pull plane
backwards to start racing.
Attach motor X by pushing the metal piece
through the holes in piece A7. The motor
should fit between pieces D5 and D6.
See Fig. 1.
Combine the structure from step 2 with
the structure from step 4.
Fig. 1
+ C13
Bend piece D17 vertically so it curves slightly.
Attach piece D17 to structure from step 16.
+ D17
+ A22 + B22
Connect pieces C20 and C21
to make a pair of structures.
Push pieces A22 and B22
onto structures from step 19.
Push pieces onto the farthest
possible notch. + C26 + C26
B
  • Page 1 1

Protocol 5872-3EC Jet Plane 3D Puzzle User manual

Protocol
Brand
Protocol
Model
5872-3EC Jet Plane 3D Puzzle
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents