Contents
Speaker Features Page 2
Charging the Speaker Page 3
Downloading the App Page 4
WiFi Speaker setup Page 4
App Interface Page 6
Using the App Page 7
Apple Music (IOS only) Page 9
Adding Speakers/Making a group Page 10
Multi-mode and Solo mode Page 11
Connecting the speaker via Bluetooth Page 12
Connecting the speaker via the AUX Cable Page 13
Support details Page 14
2
Thank you for purchasing the WiFi Bluetooth Speaker. This device is a great way to stream music
from your WiFi or Bluetooth network without the need for wires. Take it one step further with the multi-
room feature so you never miss a beat again.
Please keep this manual for future reference and ensure all safety instructions have been read
carefully before using.
1. Decrease volume 7. AUX LED Indicator
2. Quick press- change mode 8. Bluetooth LED Indicator
Long press- Search for WiFi 9. WiFi LED Indicator
3. Increase volume 10. Charging LED Indicator
4. Skip to previous track 11. AUX Port
5. Skip to next track 12. Micro USB Charging Port
6. Quick press- Play/Pause
Long press- Power On/Off
3
Charging the speaker
To charge your WiFi Speaker, attach the USB Cable to the back of the Speaker and attach the
larger end in to your computer, laptop, or a USB adapter (5V). Whilst charging, the LED
indicator will turn Red and turn Green when fully charged.
Please note: we advise customers to charge the Speaker for around 3-4 hours before using it
for the first time.
4
Downloading the App
To download the application, simply go to the App Store/Play Store on your smartphone or and
search ‘MUZO Player’.
Click to download and install the app on your device.
Once the App has been installed onto your device, a shortcut icon will appear
on your App list. Simply click to open.
WiFi Speaker setup
Firstly, ensure the Speaker is switched on, then on your IOS or Android device, open up the
‘MUZO Player’ application.
Once the app is open, it will search for the Wireless Speaker.
Then click on ‘WiFi Setup Wizard’.
5
Enter the password of your chosen network, and
press ‘Next’.
Press and hold the ‘M’ button for around 5 seconds.
A Voice will be heard indicating the speaker is
searching for the WiFi connections. Once done, press
‘Next’ on the screen.
When the speaker has connected successfully to your network router, a voice will be
heard confirming the WiFi has connected.
6
App interface
Search - Find music from local
Favorites - Favorites List
My Music - Choose music from your
mobile device
TuneIn - TuneIn Radio is an internet radio service that allows you to play radio
stations from around the world through the ‘MUZO Player’ app to your speaker.
iHeartRadio: iHeartRadio is an internet service that allows you to play radio
stations from around the world through the ‘MUZO Player’ app to your speaker.
Spotify: The Spotify option will allow you to open up the Spotify App on your
phone and allow you to stream music from it to your speaker network. This app must
be installed on your phone and will require a registered account.
Tidal: Using your Tidal Log in details, you can stream Tidal Radio Stations though
the ‘MUZO Player’ App to your speaker.
7
Using the App
There are multiple ways to connect and play music with the WiFi Speaker through the ‘MUZO
Player’ app.
Using Built-in Apps
Selected apps can be accessed through the ‘MUZO Player’ app. To use a ‘built-in’ app,
simply click on the side bar menu and select one of the options such as, iHeartRadio, TuneIn.
The music will be streamed through and can controlled from the ‘MUZO Player’ app.
Please note: Spotify is NOT considered as a ‘built-in’ app. The side bar menu simply opens
up the official app which will need to be installed on your mobile device.
To connect with Spotify, please follow the steps below.
Firstly, click on ‘Spotify’ found on the Please select the song of choice
side menu bar.
9
Apple Music (IOS only)
If you are using an Apple device and would like to play music on your WiFi Speaker through
Apple Music, please follow the steps below.
Please note: we recommend you use the ‘MUZO Player’ app to ensure you make full use of
your WiFi Speaker.
Please click on ‘Music’ app found Please select the song of choice
on your device
10
Please click on the middle Finally, select the Speaker you
option found at the bottom would like to connect to.
of the screen
Adding speakers/making a group
With multiple speakers added to your speaker network, you are able to use them in separate
rooms to play music throughout your home or office or you can set them up to create a stereo
sound system.
1. To add another speaker to your speaker network, turn on the speaker you would like to
add.
2. In the ‘MUZO Player’ app, go to the ‘Device List’ page and press the ‘+’ button found at
the top right corner of the page.
3. Follow the steps to add the new speaker within the app.
4. The new speaker will appear on the ‘Device List’ page.
11
Multi-Mode and Solo Mode
With multiple speakers on your network, you can group two or more together to play the same
audio. On the ‘Device List’ page, long press one speaker and drag it on top of another. The
‘MUZO Player’ app will combine the two speakers into a single channel that can play audio in
sync to be used in different rooms
Multi-Mode
The Multi-Mode feature allows one speaker to be
the master.
What is being played on the Master speaker will
sync to the other Speakers in the same group.
Simply press and hold the device icon and drag
towards the device you would like to pair to.
Solo Mode
Solo Mode allows you to play different
soundtracks on each Speaker and they will play
individually.
12
Connecting the Speaker via Bluetooth
Click the M button to change the Speaker to Bluetooth mode. The Bluetooth LED indicator will start to
blink blue.
On your IOS or Android Device, ensure the Bluetooth is turned on.
Search ‘time2’ from the Bluetooth list and connect to it. You will hear ‘Bluetooth connected’ and the
Bluetooth LED indicator will turn blue to indicate the device and speaker are ready to use.
13
Connecting the Speaker via the AUX cable
Plug the cable into the AUX port at the back of the speaker and insert the other end into the AUX port
of your device. You will hear the message "Auxiliary mode" and the AUX LED indicator will light blue.
Start the playback from your device.
Please note: The controls/buttons on the speaker will not work in this mode. Media playback is
controlled through the attached device, however the volume adjustment can still be controlled with the
[-] and [+] buttons on the speaker.
14
Support details
We love our products and we hope you do too!
If you want to get in touch with us about your connected product then you can speak to our
friendly chat team, email us or call us via our website; www.time2technology.com.
Our offices are open 9.00am - 5.00pm, Monday to Friday.
Connect with us wherever you are!
Send us a tweet - @time2HQ
Like us on Facebook – www.facebook.com/time2HQ
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
