Article SKU19126 Assembly Instructions

Brand
Article
Model
SKU19126
Type
Assembly Instructions
Assembly Instructions
VIREO
6 Drawer Double Dresser
VERSION 1.0
ASSEMBLY INSTRUCTIONS
Read these instructions carefully and keep for future
reference. Refer to parts inventory for guidance, and
ensure you have all pieces before starting.
When assembling, place all parts on a soft, clean, and flat
surface such as a carpet to prevent scratches.
If you’re having diculty, our friendly Customer Care
team is always here to help. Call us at 1.888.746.3455
during business hours, email [email protected] or chat
live at article.com.
VIREO 6 Drawer Double Dresser Page 2 of 7
30 min
5
PARTS INVENTORY
ID DESCRIPTION QTY
RIGHT DRAWER 1
LEFT DRAWER 1
LEG 1 1
LEG 2 1
LEG 3 1
LEG 4 1
MIDDLE LEG 1
ALLEN KEY 1
BOLT 8
LOCK WASHER 8
WASHER 8
TIME # OF PEOPLE DIFFICULTY
ANTI-TIP
Installation Required
Page 3 of 7
2
1
Two people are needed for this
step. Make sure to place dresser
down on a soft protected surface.
!
VIREO 6 Drawer Double Dresser
CAUTION!
Please take care when lifting, this
dresser is very heavy! Do not drag
when moving, must be lifted to
prevent damaging the legs!
× 8
Left glider push up.
Right glider push down.
To release drawer, use both hands
and press the lever on each side
at the same time.
!
Make sure the legs are aligned
correctly before tightening.
!
100%
85%50%
Page 4 of 7
4
3
VIREO 6 Drawer Double Dresser
Careful to push the drawer
until it closes fully.
!
Page 5 of 7
Children have died from furniture tipover.
To reduce the risk of furniture tipover:
• ALWAYS install tipover restraint provided.
• NEVER put a TV on this product.
• NEVER allow children to stand, climb or hang
on drawers, doors, or shelves.
• NEVER open more than one drawer at a time.
• Place heaviest items in the lower drawers.
30 min
3
TIME
REQUIRED TOOL
REQUIRED TOOL
8MM / 5/16" DRILL BIT
# OF PEOPLE DIFFICULTY
PARTS INVENTORY
ID DESCRIPTION QTY
BRACKET 4
M4 × 20MM SCREW 4
M8 × 51MM PLUG 4
M6 × 70MM SCREW 4
STRAP 2
ANTI-TIP RESTRAINT INSTALLATION
WARNING!
Hardware (C/D) to attach brackets to wall is
designed for drywall. To attach this unit to another
type of wall, consult with your local hardware store.
1010 Raymur Ave.
Vancouver, BC V6A 3T2
VERSION 1.4
VIREO 6 Drawer Double Dresser
Page 6 of 7
1
VIREO 6 Drawer Double Dresser
Attach pair of brackets to top corners of
the back of the unit. Note there are no
existing pilot holes on the product.
× 4
Mark on wall where second pair
of brackets should be placed.
× 2
× 4× 4 × 4
Drill holes in wall using
8mm / 5/16" drill bit.
2
3
Page 7 of 7
4B
4A
VIREO 6 Drawer Double Dresser
Align brackets on unit
with brackets on wall.
Pull strap down until it snap-locks.
× 2 × 2
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Article SKU19126 Assembly Instructions

Brand
Article
Model
SKU19126
Type
Assembly Instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents