2. Computers & electronics
  3. Computer cables
  4. Cable clamps
  5. nVent CADDY
  6. 16M Snap Close Conduit Pipe Clamp

nVent CADDY 16M Snap Close Conduit Pipe Clamp Owner's manual

  • I have reviewed the datasheet for the nVent CADDY M-Series 16M Snap Close Conduit/Pipe Clamp. This document details features like the clamp's vertical/horizontal mounting capability and tool-free finger closure. It also specifies compatible conduit sizes and static load capacity. I'm ready to answer your questions about the product.
  • What sizes of conduit can be used with this clamp?
    What is the material of the clamp?
    What is the static load capacity of the clamp?
nVent.com/CADDY
©2022 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners.
nVent reserves the right to change specifications without notice.
CADDY-DS-H87654-16M-USEN-2201
Our powerful portfolio of brands:
Snap Close Conduit/
Pipe Clamp – 16M
Part
Number
EMT Conduit
Size
Rigid Conduit/
Pipe Size
Outer Diameter
OD
Hole Size
HS Hole Type Static Load 1
F1
Static Load 2
F2
Standard
Packaging
Quantity
16M1", ¾" 1", ¾" 0.922" - 1.378"⁹⁄₃₂" Plain 100 lb 25 lb 100 pc
The nVent CADDY Snap Close Conduit Clamps (M-Series) are a fast and
efficient method to secure conduit branch circuits for electrical installations.
The M-Series is designed to provide positional consistency in application by
eliminating conduit offset as well as maintain spacing entering electrical boxes.
Increase installation efficiency by utilizing our comprehensive conduit range for
your next electrical project.
FEATURES
• May be used for either vertical or horizontal installations
• Eliminates need for offset bending conduit
• Finger closure, no tools required
• Designed for the most common branch circuits
Material: Spring Steel
Finish: nVent CADDY Armour
OD
F1
HS
F2
/