ENGLISH - 3
How to replace the air lter unit (continued)
4) Attach the new air lter unit (Replacement Filter Unit) to the projector.
zHoldtheairlterunitthatthetabisinleftsideinthegure,inserttherightsideintothe
projectorinthegurerst,andthenpressthetabuntilyouhearaclicksound.
zPleasepressthetaboftheairlterunitotherthanthepleatedlterduringinstallation.
Airlterunit
Tab
5) Attach the air lter cover to the projector.
zPerformStep2)inthereverseordertoclosetheairltercover,andpushintheairlter
cover securely until it clicks into place.
zMakesurethattheairltercoverisclosedtightly.
6) Connect the power plug, press the power button < v/b > on the control panel
or the remote control to turn on the power.
7) Press the <MENU> button to display the main menu, then press as to select
[PROJECTOR SETUP].
8) Press the <ENTER> button, then press as to select [FILTER COUNTER].
9) Press the <ENTER> button, then press as to select [FILTER COUNTER RESET].
10) Press
the
<ENTER> button.
zThe[FILTERCOUNTERRESET]conrmationmessageisdisplayed.
11) Press qw to select [OK], then press the <ENTER> button.
zThelterusagetimeis0afterreset.
Attention
zMakesurethattheairlterunitisproperlyattachedbeforeusingtheprojector.Ifitisnot
attached, the projector will suck in dirt and dust causing a malfunction.
zAfter unpacking theairlterunit, discard the packaging material properly.
zDonotdisassembletheairlterunit.
Note
zThereplacementcycleoftheairlterunitvariesgreatlydependingontheusageenvironment.