Schaefer SFT-1200 Owner's manual

Schaefer
Brand
Schaefer
Model
SFT-1200
Type
Owner's manual

This manual is also suitable for

Model Fan size Rough-in opening
SFT-1200 12" 125/8" x 125/8"
SFT-1600 16" 165/8" x 165/8"
SFT-2000 20" 205/8" x 205/8"
Note: All shutter fans are variable speed. Variable speed controls and
mechanical thermostats are available for these shutter fans as an option.
1. Cut rough-in opening in wall for appropriate size shutter fan.
(see chart below)
2. Place fan in opening.
3. Drill holes through the frame face at desired locations.
4. Fasten fan in opening using appropriate fasteners.
(not furnished)
5. Wiring should be done by a licensed electrician.
(refer to local electrical codes)
Motor view
Frame
face
Installation Instructions / Rough-in Opening for Shutter Fans
800-779-3267
[email protected] • www.schaeferfan.com
©2007 Schaefer Ventilation Equipment I-SFT 2007
Model Fan size Rough-in opening
SFT-1200 12" 125/8" x 125/8"
SFT-1600 16" 165/8" x 165/8"
SFT-2000 20" 205/8" x 205/8"
Note: All shutter fans are variable speed. Variable speed controls and
mechanical thermostats are available for these shutter fans as an option.
1. Cut rough-in opening in wall for appropriate size shutter fan.
(see chart below)
2. Place fan in opening.
3. Drill holes through the frame face at desired locations.
4. Fasten fan in opening using appropriate fasteners.
(not furnished)
5. Wiring should be done by a licensed electrician.
(refer to local electrical codes)
Motor view
Frame
face
Installation Instructions / Rough-in Opening for Shutter Fans
800-779-3267
[email protected] • www.schaeferfan.com
©2007 Schaefer Ventilation Equipment I-SFT 2007
  • Page 1 1

Schaefer SFT-1200 Owner's manual

Schaefer
Brand
Schaefer
Model
SFT-1200
Type
Owner's manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents