2. Schaefer
  3. SFT-1200

Schaefer SFT-1200, SFT-2000 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Schaefer SFT-1200 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Model Fan size Rough-in opening
SFT-1200 12" 125/8" x 125/8"
SFT-1600 16" 165/8" x 165/8"
SFT-2000 20" 205/8" x 205/8"
Note: All shutter fans are variable speed. Variable speed controls and
mechanical thermostats are available for these shutter fans as an option.
1. Cut rough-in opening in wall for appropriate size shutter fan.
(see chart below)
2. Place fan in opening.
3. Drill holes through the frame face at desired locations.
4. Fasten fan in opening using appropriate fasteners.
(not furnished)
5. Wiring should be done by a licensed electrician.
(refer to local electrical codes)
Motor view
Frame
face
Installation Instructions / Rough-in Opening for Shutter Fans
800-779-3267
[email protected] • www.schaeferfan.com
©2007 Schaefer Ventilation Equipment I-SFT 2007
Model Fan size Rough-in opening
SFT-1200 12" 125/8" x 125/8"
SFT-1600 16" 165/8" x 165/8"
SFT-2000 20" 205/8" x 205/8"
Note: All shutter fans are variable speed. Variable speed controls and
mechanical thermostats are available for these shutter fans as an option.
1. Cut rough-in opening in wall for appropriate size shutter fan.
(see chart below)
2. Place fan in opening.
3. Drill holes through the frame face at desired locations.
4. Fasten fan in opening using appropriate fasteners.
(not furnished)
5. Wiring should be done by a licensed electrician.
(refer to local electrical codes)
Motor view
Frame
face
Installation Instructions / Rough-in Opening for Shutter Fans
800-779-3267
[email protected] • www.schaeferfan.com
©2007 Schaefer Ventilation Equipment I-SFT 2007
/