VITEK
VITEK
OPERATION MANUAL
Transcendent IP
4MP Cameras
Transcendent Series 4 Megapixel
Indoor/Outdoor WDR IP Dome
Cameras with IR Illumination
FEATURES
• 1/3” 4.0 Megapixel Progressive Scan CMOS image sensor
• Up to 30fps live view @ 4 MegaPixel (2592x1520)
• Motorized Varifocal & Fixed Lens Options
• Infrared IR LED Illumination
• 120dB Super Wide Dynamic Range (WDR)
• True Mechanical Day/Night function by ICR
• XD-DNR (2D-DNR & 3D-DNR) Noise Reduction
• Fully Programmable Intelligent Analytics including Object Removal/
Museum Search, Line Crossing, and Area Intrusion Detection
• H.265/H.264/MJPEG Triple Streaming
• Secondary Video Output (CVBS)
• Remote Viewing via CMS, Internet Explorer, and iOS & Android Apps
• IP66 Weather Resistance & IK10 Impact Rating
• ONVIF Compliant
• Optional Mounts Available
• 12VDC & PoE (Power over Ethernet) Operation
Transcendent IP Cameras v4: Operation Manual
1
n Please use the specified power supply to connect.
n Do not attempt to disassemble the camera; in order to prevent electric shock, do not remove
screws or covers.
n There are no user-serviceable parts inside. Please contact the nearest service center as soon as
possible if there is any failure.
n Avoid from incorrect operation, shock vibration, heavy pressing which can cause damage to
product.
n Do not use corrosive detergent to clean main body of the camera. If necessary, please use soft dry
cloth to wipe dirt; for hard contamination, use neutral detergent. Any cleanser for high grade
furniture is applicable.
n Avoid aiming the camera directly towards extremely bright objects, such as, sun, as this may
damage the image sensor.
n Please follow the instructions to install the camera. Do not reverse the camera, or the reversing
image will be received.
n Do not operate it incase temperature, humidity and power supply are beyond the limited
stipulations.
n Keep away from heat sources such as radiators, heat registers, stove, etc.
n Do not expose the product to the direct airflow from an air conditioner.
n This is product instructions not quality warranty. We may reserve the rights of amending the
typographical errors, inconsistencies with the latest version, software upgrades and product
improvements, interpretation and modification. These changes will be published in the latest
version without special notification.
n When this product is in use, the relevant contents of Microsoft, Apple and Google will be
involved in. The pictures and screenshots in this manual are only used to explain the usage of our
product. The ownerships of trademarks, logos and other intellectual properties related to
Microsoft, Apple and Google belong to the above-mentioned companies.
n This manual is suitable for IR water-proof network camera. All pictures and examples used in the
manual are for reference only.
Transcendent IP Cameras v4: Operation Manual
2
Table of Contents
1Introduction ...................................................................................................................... 4
2IE Remote Access ............................................................................................................ 5
2.1LAN ........................................................................................................................ 5
1.1.1 Access through IP-Tool ................................................................................................................... 5
1.1.2 Directly Access through IE .............................................................................................................. 6
2.2WAN ....................................................................................................................... 8
3Remote Preview ............................................................................................................. 11
4Remote Live Surveillance .............................................................................................. 12
1.2 System Configuration ............................................................................................... 12
1.2.1 Basic Information ........................................................................................................................... 12
1.2.2 Date and Time ............................................................................................................................... 12
1.2.3 Local Config .................................................................................................................................. 13
1.2.4 Storage .......................................................................................................................................... 13
1.3 Image Configuration ................................................................................................. 14
1.3.1 Display Configuration .................................................................................................................... 14
1.3.2 Video / Audio Configuration ........................................................................................................... 15
1.3.3 OSD Configuration ........................................................................................................................ 17
1.3.4 Video Mask .................................................................................................................................... 17
1.3.5 ROI Configuration .......................................................................................................................... 18
1.4 Alarm Configuration .................................................................................................. 19
1.4.1 Motion Detection ........................................................................................................................... 19
1.4.2 Alarm Server ................................................................................................................................. 21
1.5 Event Configuration .................................................................................................. 21
1.5.1 Object Removal ............................................................................................................................. 21
1.5.2 Exception ....................................................................................................................................... 23
1.5.3 Line Crossing ................................................................................................................................ 25
1.5.4 Intrusion ......................................................................................................................................... 26
1.6 Network Configuration .............................................................................................. 28
1.6.1 TCP/IP ........................................................................................................................................... 28
1.6.2 Port ................................................................................................................................................ 29
1.6.3 Server Configuration ..................................................................................................................... 30
1.6.4 DDNS ............................................................................................................................................ 30
1.6.5 SNMP ............................................................................................................................................ 31
1.6.6 RTSP ............................................................................................................................................. 32
1.6.7 UPNP ............................................................................................................................................ 33
1.6.8 Email ............................................................................................................................................. 33
1.6.9 FTP ................................................................................................................................................ 34
4.1Security Configuration ....................................................................................... 35
1.6.10 User Configuration ...................................................................................................................... 35
1.6.11 Online User ................................................................................................................................. 37
1.6.12 Block and Allow Lists ................................................................................................................... 37
Transcendent IP Cameras v4: Operation Manual
3
4.2Maintenance Configuration ............................................................................... 37
1.6.13 Backup and Restore .................................................................................................................... 37
1.6.14 Reboot ......................................................................................................................................... 38
1.6.15 Upgrade ....................................................................................................................................... 38
1.6.16 Operation Log .............................................................................................................................. 39
5Record Search ................................................................................................................ 40
5.1Photo Search ...................................................................................................... 40
5.2Photo Search ...................................................................................................... 40
5.3Video Search ....................................................................................................... 41
1.6.17 Local Video Search ..................................................................................................................... 41
1.6.18 SD Card Video Search ................................................................................................................ 42
1.6.19 This feature is camera dependent; some cameras do not have an SD card slot. ....................... 42
6Specifications ................................................................................................................. 43
Transcendent IP Cameras v4: Operation Manual
4
1 Introduction
This IP camera is designed for high performance CCTV solutions. It adopts state of the art video
processing chips. It utilizes most advanced technologies, such as video encoding and decoding
technology, complies with the TCP/IP protocol, SoC, etc to ensure this system is more stable and
reliable.
Main Features
l ICR auto switch, true day/night
l 3D DNR, digital WDR
l ROI coding
l BLC, Defog, Anti-flicker
l Supports smart phones & tablets for remote monitoring
Surveillance Application
Transcendent IP Cameras v4: Operation Manual
5
2 IE Remote Access
2.1 LAN
In LAN, there are two ways to access the IP-Cam: 1. access through IP-Tool; 2. directly access through
IE browser.
1.1.1 Access through IP-Tool
Network connection:
� Make sure the PC and IP-Cam are connected to the LAN and the IP-Tool is installed in the PC from
the CD.
②
Double click the IP-Tool icon on the desktop to run this software as shown below:
③
Modify the IP address. The default IP address of this camera is 192.168.226.201. Click the
information of the camera listed in the above table to show the network information on the right side.
Modify the IP address and gateway of the camera and make sure its network address is in the same
local network segment as that of the computer. Please modify the IP address of your device according
to the practical situation.
Transcendent IP Cameras v4: Operation Manual
6
For example, the IP address of your computer is 192.168.1.4. So the IP address of the camera shall be
changed to 192.168.1.X. After modification, please input the ADMIN password of the administrator
and click “Modify” button to modify the setting.
F
④
Double click the IP address and then the system will pop up IE browser to connect IP-CAM. IE
browser will ask to download the Active X control. After downloading, a login window will pop up as
shown below.
Input the username and password to log in.
F
1.1.2 Directly Access through IE
The default network settings are as shown below:
IP address: 192.168.226.201
Subnet Mask: 255.255.255.0
Gateway: 192.168.226.1
HTTP: 80
Data port: 9008
The default password of the administrator is “123456”.
The default username is “admin”; the default password is “123456”.
Transcendent IP Cameras v4: Operation Manual
7
You may use the above default settings when you log in the camera for the first time. You may directly
connect the camera to the computer through network cable.
� Manually set the IP address of the PC as the network segment should be as the same as the default
settings of the IP camera. Open the network and share center. Click “Local Area Connection” to pop
up the following window.
Select “Properties” and then select internet protocol according to the actual situation (for example:
IPv4). Next, click “Properties” button to set the network of the PC.
Transcendent IP Cameras v4: Operation Manual
8
②
Open IE browser and input the default address of IP-CAM and confirm. IE browser will ask to
download the Active X control.
③
After downloading the Active X control, the login dialog box will pop up.
④
Input the default username and password and then enter to view.
2.2 WAN
Ø Access through the router or virtual server
� Make sure the camera is connected via LAN and then log into the camera via LAN and go to
ConfigàNetworkàPort to set the port number.
Port Setup
②
Go to ConfigàNetworkàTCP/IP menu to modify the IP address.
Transcendent IP Cameras v4: Operation Manual
9
IP Setup
③
Go to the router’s management interface through IE browser to forward the IP address and port of
the camera. Please check your router manual for instructions on port forwarding.
Router Setup
④
Open IE browser and input its WAN IP and http port to access.
Ø Access through PPPoE dial-up
Network connection
You may access the camera through PPPoE auto dial-up. The setting steps are as follow:
①
Go to ConfigàNetworkàPort to set the port number.
Transcendent IP Cameras v4: Operation Manual
10
②
Go to ConfigàNetworkàTCP/IPà PPPoE Config menu. Enable PPPoE and then input the user
name and password which you can get from your internet service provider.
③
Go to ConfigàNetworkàDDNS menu. Before you configure the DDNS, please apply for a
domain name first. Please refer to DDNS configuration for detail information.
④
Open IE browser and input the domain name and http port to access.
Ø Access through static IP
Network connection
The setting steps are as follow:
� Go to ConfigàNetworkàPort to set the port number.
� Go to ConfigàNetworkàTCP/IP menu to set the IP address. Check “Use the following IP address”
and then input the static IP address and other parameters.
�Open IE browser and input its WAN IP and http port to access.
Transcendent IP Cameras v4: Operation Manual
11
3 Remote Preview
After you log in, you will see the following window.
The following table is the instructions of the icons on the remote live interface.
Icon Description Icon Description
Original size
Scene change indicator icon
Appropriate size
Abnormal clarity indicator icon
Auto
Color abnormal indicator icon
Full screen
Motion alarm indicator icon
Start/stop live view
Start/stop recording
Enable/disable audio
Zoom in
Snap
Zoom out
l When motion detection alarm is triggered, the people icon will turn red.
l In full screen mode, double click to exit.
l icons may not be displayed for some versions without intelligent analysis function.
Transcendent IP Cameras v4: Operation Manual
12
4 Remote Live Surveillance
1.2 System Configuration
The “System” configuration includes four submenus: Basic Information, Date and Time, Local Config
and storage.
1.2.1 Basic Information
In the “Basic Information” interface, you can check the relative information of the device.
1.2.2 Date and Time
Go to ConfigàSystemàDate and Time. Please refer to the following interface.
You can select the time zone and DST as required.
Click “Date and Time” tab to set the time mode.
Transcendent IP Cameras v4: Operation Manual
13
1.2.3 Local Config
Go to ConfigàSystemàLocal Config. You can set the storage path of the captured pictures and video
records. You can also enable or disable the video audio.
1.2.4 Storage
Go to ConfigàSystemàStorage to go to the interface as shown below.
The first time you use the SD card, you should click “Format” button to format the SD card.
Click “Pop Up” button to stop writing data to SD card. Then the SD card can be ejected safely.
F
Go to ConfigàSystemàStorageàRecord to go to the interface as shown below. You can set the SD
Note: Using the SD card function should be coordinated with motion alarm.
When alarm is triggered, the system will automatically snap picture and save
the picture or record into SD card.
Transcendent IP Cameras v4: Operation Manual
14
card record stream. Set the pre record time if you enable pre record. Click “Save” button to save the
settings.
Pre Record Time: Set the time to record before the actual recording begins.
1.3 Image Configuration
Image Configuration includes Display, Video/Audio, OSD, Video Mask, ROI Config and
Zoom/Focus.
1.3.1 Display Configuration
Go to ImageàDisplay interface as shown below. You can set and adjust the picture’s brightness,
contrast, hue and saturation, etc.
Brightness: Set the brightness level of the camera’s image.
Contrast: Set the color difference between the brightest and darkest parts.
Hue: Set the total color degree of the image.
Saturation: Set the degree of color purity. The purer the color is, the brighter the image is.
Sharpness: Set the resolution level of the image plane and the sharpness level of the image edge.
Transcendent IP Cameras v4: Operation Manual
15
Noise Reduction: Decrease the noise and make the image more thorough. Increasing the value will
make the noise reduction effect better but it will reduce the image resolution.
Backlight Compensation:
l Off: Close the backlight compensation function. It is the default mode.
l WDR
u As to the WDR scene, WDR will help the camera provide clear images when there are both very
bright and very dark areas simultaneously in the field of view by lowering the brightness of the bright
area and increasing the brightness of the lowlight area. High, middle and low can be selected.
u There will be some recording lost for a few seconds during mode changing from non-WDR to
WDR mode.
l HLC: Lower the brightness of the whole image by suppressing the brightness of the image’s
highlight area and reducing the size of the halo area.
l BLC: The exposure will begin automatically according to the scene for the goal of seeing the
darkest area of the image.
HFR：High frame rate mode. You may enable or disable it as needed.
Antiflicker:
l Off: Close the anti-flicker function.
l 50Hz: Makes sure the horizontal stripes will not appear in the image while the device is adjusting
the exposure automatically according to the brightness of the scene when the electric supply is 50Hz.
l 60Hz: Makes sure the horizontal stripes will not appear in the image while the device is adjusting
the exposure automatically according to the brightness of the scene when the electric supply is 60Hz.
White Balance: Adjust the color temperature according to the environment automatically.
Frequency: 50Hz and 60Hz (50Hz= PAL(Europe) 60Hz= NTSC (North America)).
Day/night Mode: Please choose the mode as needed.
Auto= will change to Black & White in low light
Day= Camera will be in color all the time
Night= Camera will be in Black & White all the time
Schedule= set a particular time the camera switches to Night mode or Day mode
Sensitivity: High, middle and low can be selected.
Infrared Mode: You may choose “ON”, “OFF” and “Auto” as required.
Exposure Mode: You may choose “Auto” or “Manual” as required.
Corridor Pattern: You can change the direction of the video image by using this function. 0, 90, 180
and 270 are available. The default value is 0. The video resolution should be 1080P or under 1080P if
you use this function.
Image Mirror: Reverse the current video image right and left.
Image Flip: Turn the current video image upside down.
1.3.2 Video / Audio Configuration
Go to ImageàVideo / Audio interface as shown below. In this interface, you can set the resolution,
frame rate, bitrate type, video quality and so on subject to the actual network condition.
Transcendent IP Cameras v4: Operation Manual
16
Click “Audio” tab to go to the interface as shown below.
Three video streams can be adjustable.
Resolution: The higher the resolution is, the clearer the image is.
Frame rate: The higher the frame rate is, the more fluid the video is. However, more storage room
will be taken up.
Bitrate type: Including CBR and VBR. CBR means that no matter how the video changes, the
compression bitrate keeps constant. This will not only facilitate the image quality better in a constant
bitrate but also help to calculate the capacity of the recording. VBR means that the compression bitrate
can be adjustable according to the change of the video resources. This will help to optimize the
network bandwidth.
Bitrate: Please choose it according to the actual network situation.
Video Quality: When VBR is selected, you need to choose image quality. The higher the image
quality you choose, the more bitrate will be required.
I Frame interval: It is recommended to use the default value. If the value is to high, the read speed of
the group of pictures will be slow resulting in the quality loss of the video.
Video Compression: H264 and H265 are optional. Higher quality of image can be transferred under
limited network bandwidth by using H265 video encoding; however, higher quality of the hardware is
required.
Profile: Baseline, main/high profiles are optional. Baseline profile is mainly used in interactive
application with low complexity and delay. Main/high profile is mainly used for higher coding
requirement.
Send Snapshot: Please select according to the actual situation.
Video encode slice split: If enabled, you may get a more fluid image even though using a
low-performance PC.
Watermark: If enabled, input the watermark content. You may check the watermark when playing
back the local recording in the search interface, unless the recording file has been tampered with.
Audio Encoding: G711A and G711U are selectable.
Audio Type: MIC and LIN are selectable.
Transcendent IP Cameras v4: Operation Manual
17
1.3.3 OSD Configuration
Go to ImageàOSD interface as shown below.
You can set the time stamp, device name and OSD content here. After enabling the corresponding display
and entering the content, drag them to change their position. Then click “Save” button to save the settings.
1.3.4 Video Mask
Go to ImageàVideo Mask interface as shown below. You can set 4 mask areas at most.
To set up video mask:
1. Enable video mask.
2. Click “Draw Area” button and then drag the mouse to draw the video mask area.
3. Click “Save” button to save the settings.
4. Return to live view to see the following picture.
Transcendent IP Cameras v4: Operation Manual
18
Clear the video mask:
Go to video mask interface and then click “Clear” button to delete the current video mask area.
1.3.5 ROI Configuration
Go to ImageàROI Config interface as shown below.
1. Check “Enable” and then click “Draw Area” button.
2. Drag the mouse to set the ROI area.
3. Set the level.
4. Click “Save” button to save the settings.
Now, you will see the selected ROI area is clearer than other areas especially in a low bitrate condition.
Transcendent IP Cameras v4: Operation Manual
19
1.4 Alarm Configuration
Alarm configuration includes two submenus: Motion Detection and Alarm Server.
1.4.1 Motion Detection
Go to AlarmàMotion Detection to set motion detection alarm.
1. Check “Enable Alarm” check box to activate motion based alarm, choose alarm holding time and set
alarm trigger options.
Trigger Snap: If selected, the system will snap images on an alarm and save the images to the SD
card.
Trigger SD Recording: If selected, the recording will be triggered and saved to the SD card on an
alarm.
Trigger Email: If “Trigger Email” and “Attach Picture” checkbox is checked (email address shall be
set first in the Email configuration interface), the captured pictures and triggered event will be sent to
those addresses.
Trigger FTP: If “Trigger FTP” and “Attach Picture” checkbox is checked, the captured pictures will
be sent to the FTP server address. Please refer to FTP configuration chapter for more details.
2. Set motion detection area and sensitivity. Click “Area and Sensitivity” tab to go to the interface as
shown below.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
