Hailink SP116NN00R User manual

Brand
Hailink
Model
SP116NN00R
Category
Video splitters
Type
User manual

Hailink SP116NN00R is a 1x16 HDMI splitter that allows one HDMI source to be connected to sixteen HDMI displays simultaneously. It supports full 3D pass-through and full HD 1080P. This unit has the capability of being controlled via IR signals, either at the source or from the displays. It offers solutions for various environments, including HDTV, home theater, data center, conference room presentation, school and corporate environments, and AV installation.

Hailink SP116NN00R is a 1x16 HDMI splitter that allows one HDMI source to be connected to sixteen HDMI displays simultaneously. It supports full 3D pass-through and full HD 1080P. This unit has the capability of being controlled via IR signals, either at the source or from the displays. It offers solutions for various environments, including HDTV, home theater, data center, conference room presentation, school and corporate environments, and AV installation.

1x16 HDMI Splitter
User Manual
SP116NN00R
Full 3D Pass-through
Support IR Control
INTRODUCTION
•1 x HDMI 1 by 16 Splitter unit
•1 x 5V DC power supply
•1 x User Manual
•HDMI, HDCP 1.2 and DVI compliant
•Support full 3D pass-through
•Support full HD 1080P
•Super IR control system, IR transport channel can be forward or backward
per your installation
•Support CEC bypass
•External and internal EDID settings
FEATURES
PACKAGE CONTENTS
This 1 x 16 HDMI splitter is one of our latest versions that allows one HDMI
source to be connected to sixteen HDMI displays simultaneously. You can enjoy
the same high resolutions of sixteen displays at 1080P. Furthermore, this unit
has the capability of being controlled via IR signals. You can control your device
either at the source or from the displays. This is accomplished by using an
optional IR pigtail transmetter and receiver.
It offers solutions for HDTV, STB, DVD, home theater, projector manufacture
plant environments testing, data center, information distribution, conference
room presentation, school and corporate training environments, AV installation,
and the area where have noise.
PANEL DESCRIPTION
1 POWER SWITCH BUTTON
2 HDMI OUTPUT LED
3 IR OUTPUT
4HDMI INPUT LED
Front Panel
Rear Panel
1 POWER SUPPLY INPUT
2 HDMI OUTPUT
3 HDMI INPUT
1 X 16
Splitter
IR Channel
13 14 15 16
12
ON
OFF
Input
11
109
67 8
5 4 3 2 1
Output
1
23
4
DC 5V
HDMI Out
Output1 Output2 Output3 Output4 Output9 Output10 Output11 Output12 Input
HDMI In
Output5 Output6 Output7 Output8 Output9 Output10 Output11 Output12
HDMI Out
2
2
1
3
INSTALLATION
CONNECTION DIAGRAM
•Connect HDMI input port to the signal source equipment such as DVD player.
•Connect each HDMI output port to the HDMI displays.
•Connect to IR output port with the IR blaster cable not included in the
packagefor IR signal transmission. Place the IR blaster in direct line-of-sight
of the equipment to be controlled.
•Connect to the IR receiver cable (not included in the package) for IR signal
reception. Make sure that the remote being used is in direct line-of-sight of
the IR receiver.
•Plug the 5VDC power supply into the unit and connect the adaptor to
AC outlet.
DC 5V
08 08 PLAY
IN
IR
OUT
IR
CEC
IN
IR
OUT
IR
CEC
IN
IR
OUT
IR
CEC
IN
IR
OUT
IR
CEC
IN
IR
OUT
IR
CEC
5 6 7
HDMI
1 to 16
IR
13 14 15 16
12
ON
OFF
HDMI Input
11
109
67 8
5 4 3 2 1
HDMI Output
DC 5V
HDMI Output
HDMI Output1 HDMI Output2 HDMI Output3 HDMI Output4
HDMI Output
HDMI Output9 HDMI Output10 HDMI Output11 HDMI Output12
HDMI Input
HDMI In
HDMI Output5 HDMI Output6 HDMI Output7 HDMI Output8 HDMI Output9 HDMI Output10 HDMI Output11 HDMI Output12
8910 1112131415
Input Port
Output Port
Bandwidth
Output Resolution
Operating Temperature
Deep Color
Chassis
Dimension
Weight
Power Supply
SPECIFICATION
1xHDMI(Female connector)
16xHDMI(Female connector), 1xIR Channel
10.2Gbps
480i~1080P@50/60,1080P@24/50/60,
VGA~UXGA
-15~55/5°F~131°F
36bit
Metal
440mm(L)x220mm(W)x44mm(H)
2000g
DC 5V
Please read the following safety precautions carefully before you unpack
and install this equipment.
1.Do not expose the unit to rain, moisture or any other dripping liquids. And
keep it away from any wet locations such as fishing tanks, vases.
2.Do not install the unit close to fire or any other heat sources.
3.Keep the unit in dry and ventilated area. Do not install in bookcase,
cabinet or any other confined space.
4.Stop using the unit during thundering or lightening storms.
5.Avoid the power cable to be stepped on or pinched. Position the unit
carefully to avoid damage or accident.
6.Clean the unit only with dry cloth.
7.Only use accessories specified by the manufacturer.
8.Unplug the equipment when unused for a long period of time.
9.Do not try to open any non-serviceable parts. Contact your authorized
servicing center and personnel.
SAFETY PRECAUTIONS
Tel:+86 769 81877098
Fax:+86 769 81877138
Email:[email protected]
Http:www.hailink.cn
Danger Electric
Shock Risk
Keep Dry
Keep Away
from Heat
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Hailink SP116NN00R User manual

Brand
Hailink
Model
SP116NN00R
Category
Video splitters
Type
User manual

Hailink SP116NN00R is a 1x16 HDMI splitter that allows one HDMI source to be connected to sixteen HDMI displays simultaneously. It supports full 3D pass-through and full HD 1080P. This unit has the capability of being controlled via IR signals, either at the source or from the displays. It offers solutions for various environments, including HDTV, home theater, data center, conference room presentation, school and corporate environments, and AV installation.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents