Moen R8718PS User manual

Type
User manual

Moen R8718PS, a 1 ¼” peened stainless steel grab bar with a satin finish, offers reliable support and safety in your bathroom. Engineered to withstand up to 500 lbs. of pull, it ensures stability when entering or exiting the shower or bathtub. Its concealed screw mounting provides a clean and seamless look, while the flange covers snap into place for a secure installation. Whether you're looking for added support or creating a safer bathing environment for a loved one, the Moen R8718PS grab bar is a dependable choice.

Moen R8718PS, a 1 ¼” peened stainless steel grab bar with a satin finish, offers reliable support and safety in your bathroom. Engineered to withstand up to 500 lbs. of pull, it ensures stability when entering or exiting the shower or bathtub. Its concealed screw mounting provides a clean and seamless look, while the flange covers snap into place for a secure installation. Whether you're looking for added support or creating a safer bathing environment for a loved one, the Moen R8718PS grab bar is a dependable choice.

25300 AL MOEN DRIVE
NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: (800) 321-8809 FAX: (800) 848-6636
INTERNATIONAL: (440) 962-2000 FAX: (440) 962-2726
CUSTOMER SERVICE (USA): 800-882-0116 FAX: (888) 379-2720
WWW.SHOWHOUSE.MOEN.COM
Copyright Creative Specialties International
1 ¼”
Peened grab bar
rods are formed
from type 304 stainless steel tubing with a
satin finish.
12” 42” length is 20 gauge
48” length is 18 gauge
q
R8712P
, LR8712P
12” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ¼” Diameter Bar
q LR8716P - 16” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ¼” Diameter Bar
q R8718P, LR8718P 18” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ¼” Diameter Bar
q R8724P, LR8724P 24” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ¼” Diameter Bar
q R8730P 30” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ¼” Diameter Bar
q R8732P - 32” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ¼” Diameter Bar
q R8736P 36” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ¼” Diameter Bar
q R8742P 42” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ¼” Diameter Bar
q R8748P 48” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ¼” Diameter Bar
Stock Number:
______________________Grab Bar
By Creative Specialties
Installation Instructions:
Stock Numbers:
Dimensions:
1 ¼” Peened Grab Bar
Conceal
ed Screw
R8700
Home Care Technical Specification
Compliance:
- ADA, ANSI, ASTM, CSA
- Tested to 500 lbs. pull
A B C
R8712P 12.00 8.86 15.14
R8718P 18.00 14.86 21.14
R8724P 24.00 20.86 27.14
R8730P 30.00 26.86 33.14
R8736P 36.00 32.86 39.14
R8742P 42.00 38.86 45.14
R8748P 48.00 44.86 51.14
1. Position unit on wall in desired location.
2. Mark mounting holes.
3. Drill starter holes.
4. Mount unit on wall using 2 ¼” screws (provided).
5. Snap flange covers into place.
Note: SecureMount Anchors are recommended for use in non-stud
(hollow-wall) applications per installation instructions. (Secure Mount
Anchors are sold separately)
  • Page 1 1

Moen R8718PS User manual

Type
User manual

Moen R8718PS, a 1 ¼” peened stainless steel grab bar with a satin finish, offers reliable support and safety in your bathroom. Engineered to withstand up to 500 lbs. of pull, it ensures stability when entering or exiting the shower or bathtub. Its concealed screw mounting provides a clean and seamless look, while the flange covers snap into place for a secure installation. Whether you're looking for added support or creating a safer bathing environment for a loved one, the Moen R8718PS grab bar is a dependable choice.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI