Page is loading ...
01 TitU1+U4.fm Seite 1 Freitag, 7. Mai 2010 3:43 15
1
LOOKING FOR MORE INFORMATION
This Quick Reference Guide does not
replace the User’s Manual.
If you require additional information or are
unsure of a specific issue, please refer to
the User’s Manual.
The asterisk * identifies optional equipment.
Functional introduction
System overview . . . . . . . . . . . . . . . . . 3
System components . . . . . . . . . . . . . . 4
Menu system . . . . . . . . . . . . . . . . . . . . 6
Bottom status line . . . . . . . . . . . . . . . . 6
Main menu, content area
and Options menu . . . . . . . . . . . . . . . . 6
Basic functions. . . . . . . . . . . . . . . . . . . 6
Audio settings . . . . . . . . . . . . . . . . . . . 7
FM and AM mode
HD Radio (TM) information . . . . . . . . . 8
Switching to FM/AM mode
and switching bands. . . . . . . . . . . . . . . 8
Tuning to stations . . . . . . . . . . . . . . . . 8
Storing stations . . . . . . . . . . . . . . . . . . 9
XM Satellite Radio mode
XM
®
Satellite Radio information. . . . . 10
Switching to XM
®
Satellite Radio
mode . . . . . . . . . . . . . . . . . . . . . . . . . 10
Tuning to channels . . . . . . . . . . . . . . 10
Storing channels . . . . . . . . . . . . . . . . 11
DISC mode
Loading/ejecting a disc . . . . . . . . . . . 13
Opening the DISC main menu. . . . . . 13
Audio disc playback . . . . . . . . . . . . . . 13
Video DVD/CD playback . . . . . . . . . . 15
AUX mode
Connecting an AUX device . . . . . . . . 17
Supported signal sources . . . . . . . . . 17
AUX main menu . . . . . . . . . . . . . . . . 17
iPod
®
playback . . . . . . . . . . . . . . . . . 18
USB playback . . . . . . . . . . . . . . . . . . 18
iPod
®
and USB playback functions . . 18
AUX source playback . . . . . . . . . . . . 19
PHONE
Pairing a mobile phone . . . . . . . . . . . 20
Connecting a mobile phone . . . . . . . 20
Device list and pairing/connection
status. . . . . . . . . . . . . . . . . . . . . . . . . 20
Calling functions . . . . . . . . . . . . . . . . 21
Navigation
XM NavTraffic
®
information. . . . . . . . 21
Navigation main menu . . . . . . . . . . . 22
Entering destinations. . . . . . . . . . . . . 22
After entering the destination . . . . . . 24
During route guidance. . . . . . . . . . . . 24
Settings menu . . . . . . . . . . . . . . . . . . 24
Audible driving recommendations . . . 25
Map functions . . . . . . . . . . . . . . . . . . 25
Table of contents
#HMC QRG DIS.book Seite 1 Freitag, 7. Mai 2010 3:43 15
2
Table of contents
Voice control
General information . . . . . . . . . . . . . 26
Help function (teleprompter) . . . . . . . 26
Example FM/AM mode . . . . . . . . . . . 26
Example PHONE mode . . . . . . . . . . 26
Operating picklists . . . . . . . . . . . . . . 27
Command overview . . . . . . . . . . . . . 27
INFO
INFO main menu . . . . . . . . . . . . . . . 29
Information functions . . . . . . . . . . . . 30
Car setting functions . . . . . . . . . . . . . 30
System setting functions. . . . . . . . . . 30
Rear Camera*
Switching the rear camera view on. . 31
Switching the rear camera view off. . 31
#HMC QRG DIS.book Seite 2 Freitag, 7. Mai 2010 3:43 15
3
Functional introduction
System overview
Steering wheel
Display
Head unit
Main function buttons
Controller
#HMC QRG DIS.book Seite 3 Freitag, 7. Mai 2010 3:43 15
4
Functional introduction
System components
Head unit
The head unit is located in the
vehicle dashboard.
Press : Switching audio/
video playback off /on
Press
and hold: Switching
the display off
Turn
: Setting the volume
Disc slot
Ejecting a disc
Loading a disc
Display
The display is located in the
vehicle dashboard. It does not
have any controls.
Display
Central control panel
The central control panel is
located in the front in the vehicle
center console. It comprises the
controller and the main function
buttons.
Main function buttons
Controller
Controller functions
You can push, turn and press the
controller
.
Controller
웇 Push :
Switching between the
different menu areas.
웇 Push :
Scrolling through a list page by
page, or moving to a menu
item.
웇 Push :
Moving the map.
Controller
Turn to the left or right
:
Highlighting a menu item and
scrolling through a list item by
item.
Controller
Press:
Confirming a highlighted menu
item.
In the following descriptions,
highlighting and confirming a
menu item is combined into one
prompt for action and referred
to as “selecting”.
#HMC QRG DIS.book Seite 4 Freitag, 7. Mai 2010 3:43 15
5
Functional introduction
Main function buttons
Switching to FM/AM mode,
switching the FM mode and
switching bands.
(short press)
웇 Going back one menu
level
웇 Switching between full-
screen video and menu
screen:
웇 Video DVD
웇 Video CD
웇 AUX video
(long press)
Opening the main menu for
the active main function.
웇 Calling up the map
display and switching to
Navigation mode
웇 Switching the map from
scroll mode to position
mode while the map is
displayed
웇 Calling up a current
audible driving
recommendation
Opening the Navigation
main menu
웇 Opening the INFO main
menu
웇 Opening the PHONE
main menu
Function buttons on the
steering wheel
웇 Switching to DISC mode
and playing discs
웇 Switching to AUX mode
Switching to XM
®
Satellite
Radio mode
and (short press)
웇 Tuning to a station via
the presets (FM or AM)
웇 Skipping chapters
forward/back ( video
DVD)
웇 Skipping tracks forward/
back (Audio disc, Video
CD, iPod
®
1
mobile
digital device, USB
memory stick)
and (long press)
웇 Tuning to a station via a
station search (FM or
AM)
웇 Tuning to a channel via
the channel list (XM
®
Satellite Radio)
웇 Selecting discs and
playing discs
웇 Fast forwarding/
reversing (USB memory
stick, iPod
®
1
mobile
digital device)
1iPod
®
is a trademark of Apple Inc.
#HMC QRG DIS.book Seite 5 Freitag, 7. Mai 2010 3:43 15
6
Functional introduction
and
Setting the volume
(short press)
Calling up main functions
(long press)
Switching audio/video
playback off/ on
Activating/deactivating the
voice control system
(short press)
웇 Opening the PHONE
main menu
웇 Switching private mode
on/off
웇 Accepting an incoming
call
웇 Accepting a call-waiting
call and holding the first
call
웇 Swapping between two
calls
Menu system
Top status line
The top status line shows various
information.
Currently active main function
Currently active entertainment
source
Preset of the currently tuned
station in the presets
Currently played frequency (in
case of DISC mode currently
played track or chapter)
Audio play mode/Stereo
availability
(long press)
웇 Cancel outgoing call
웇 Using redial
웇 Rejecting an incoming
call
웇 Ending a call
웇 Ending the active call
Bottom status line
The bottom status line shows the
controller icons among other
things.
Action of the controller
The icons
왗, 왘, 왖 and 왔
represent the directions of
movement of the controller
.
The icon
represents turning the
controller
.
Each individual icon can be shown
in white or gray.
White icon:
Pushing or turning as appropriate
initiates an operation.
Gray icon:
Pushing or turning as appropriate
does not initiate an operation
Main menu, content area and
Options menu
Main menu
Content area (blue frame =
area is active)
Highlighted menu item in the
content area
왘: Options menu is available
웇: Currently tuned station
Basic functions
Selecting a menu item
왘 Turn until the desired
menu item is highlighted, then
press
.
#HMC QRG DIS.book Seite 6 Freitag, 7. Mai 2010 3:43 15
7
Functional introduction
Opening the Options menu
왘
With the content area active
(blue frame around), push
once
.
You can now select further
menu items.
Main menu
Top status line
Content area
Highlighted menu item in the
Options menu
Options menu
Bottom status line
Switching between different
menu areas
왘 Push repeatedly
until the desired area is active
(blue frame around it)
.
Closing a menu
왘
Push once , or briefly
press
.
Audio settings
왘
In a main menu, select
Settings.
The Audio Settings menu
appears, see the following
illustration.
If a Settings selection menu
appears:
왘 Select Audio.
The Audio Settings menu
appears.
Audio Settings menu
Setting the balance/fader
왘
In the Audio Settings menu,
select
Balance/Fader.
Scale for the fader setting
Fader indicator
Balance indicator
Scale for the balance setting
왘 To switch between Balance
and Fader: Press
.
The previously inactive
function is now active.
왘 To set a value: Turn
until the desired setting is
reached.
Setting the treble/mid/bass
왘
In the Audio Settings menu,
select
Treble/Mid/Bass.
Scale for the treble setting
Scale for the mid setting
Scale for the bass setting
Treble indicator
Mid indicator
Bass indicator
왘 Activating a scale: Press
or push
repeatedly
until the desired scale is
active.
왘 To set a value: Turn
until the desired setting is
reached.
#HMC QRG DIS.book Seite 7 Freitag, 7. Mai 2010 3:43 15
8
Functional introduction/FM and AM mode
Switching surround on/off
왘
In the Audio Settings menu,
select
Surround.
Status display
Menu item Surround
Depending on the previous
status, the function will be
switched on or off.
= function switched on
= function switched off
Saving the settings
The system saves a setting
automatically.The respective
menus are automatically closed
after a short time.
HD Radio (TM) information
HD Radio
TM
Technology
Manufactured Under License
From iBiquity Digital Corporation.
U.S. and Foreign Patents. HD
Radio
TM
and the HD Radio logo
are proprietary trademarks of
iBiquity Digital Corporation.
The Driver Information System
is able to receive standard
analog FM/AM radio
broadcasting as well as digital
HD Radio
TM
FM/AM
broadcasting.
HD Radio
TM
is a technology to
carry digital broadcasting as
well as analog ones using
existing FM and AM
broadcasting frequencies.
HD Radio
TM
reception is available
in the United States, including
Alaska and Hawaii.
Switching to FM/AM mode
and switching bands.
왘
Press .
Illustration shows the FM main menu
while receiving a analog FM signal
Currently active mode/band
Highlighted main menu item
Currently active entertainment
source
Preset of the currently tuned
station in the presets
If transmitted name of the
currently tuned station, else
frequency
Indicator for stereo reception
(analog FM reception only) or
HD Radio
TM
reception (digital
AM/FM reception only)
If transmitted program type of
the currently tuned station
(analog FM reception only) or
song title currently playing
(digital AM/FM reception
only), else no display
Main menu
Tuning to stations
Tuning to a FM station via the
local station list
왘 In the FM Main menu, select
Local Stations.
The station list appears.
왘 To tune to a station: Select
the desired station in the
station list.
Tuning to a station via the
presets
왘 In the FM or AM Main menu,
select
Presets.
The presets appear.
#HMC QRG DIS.book Seite 8 Freitag, 7. Mai 2010 3:43 15
9
FM and AM mode
Preset number of the currently
tuned station
웇: Currently tuned station
Presets
왘 To tune to a station: Select
the desired station in the list.
Tuning to a station via a
search
왘 In the FM or AM Main menu,
select
Tune & Seek.
Currently tuned frequency
왘 Option 1: Briefly
push
.
The seek proceeds upwards
or downwards and stops at the
next receivable station.
왘 Option 2:: Push or push
and hold
.
The frequency
increases
or decreases.
After releasing
, the seek
stops at the next receivable
station.
Tuning to a station via manual
tuning
왘
In the FM or AM Main menu,
select
Tune & Seek.
Currently tuned frequency
왘 Turn .
The frequency
increases
or decreases, depending on
the direction of rotation.
Tuning to a station via the
Scan function
왘
To start the Scan function:
In the FM or AM main menu,
select
Scan.
The Scan function starts, a
corresponding message is
displayed.
The Scan function will stop
automatically, if the frequency
from where it has been started
is reached again.
왘 To stop the Scan function
manually: Press
.
Storing stations
왘
Tune to a desired station.
왘 In the FM or AM main menu,
select
Presets.
The presets appear.
왘 To select a preset:
Turn
until the desired
preset number (here 6) is
highlighted
.
Frequency of the currently
tuned station
Preset number 6
왘왘
#HMC QRG DIS.book Seite 9 Freitag, 7. Mai 2010 3:43 15
10
FM and AM mode/XM Satellite Radio mode
왘 To store the currently tuned
station in the selected
preset: Press and hold
until the station is stored.
XM
®
Satellite Radio
information
XM
®
and the XM
®
logos are
registered trademarks of XM
Satellite Radio Inc.
XM
®
Satellite Radio offers the
reception of a wide range of
programs, e.g. music, sports,
news - all in digital quality.
XM
®
Satellite Radio is available in
the United States (except Alaska
and Hawaii) and Canada.
Switching to XM
®
Satellite
Radio mode
왘
Press .
Currently active mode
Highlighted main menu item
Currently active entertainment
source
Preset of the currently tuned
channel in the presets
Channel name or number of
the currently tuned channel
Indicator for XM
®
Satellite
Radio mode
If transmitted song title
currently playing, else no
display
Main menu
Tuning to channels
Tuning to a channel via the
Tune & Seek menu
왘
In the XM
®
Satellite Radio
main menu, select
Tune &
Seek
.
The Tune & Seek menu
appears.
Tune & Seek menu
Currently tuned channel
Info display
왘 To tune to a channel:
Turn
.
The system tunes to the next
or to the previous available
subscribed channel,
depending on the rotation.
Tuning to a channel via the
channel presets
왘 In the XM
®
Satellite Radio
main menu, select
Presets.
The presets appear.
웇: Currently tuned channel
Presets
왘 To tune to a channel: Select
the desired channel.
Tuning to a channel via the
Scan function
왘 To start the Scan function:
In the XM
®
Satellite Radio
main menu, select
Scan.
The Scan function starts, a
corresponding message is
displayed.
#HMC QRG DIS.book Seite 10 Freitag, 7. Mai 2010 3:43 15
11
XM Satellite Radio mode
The Scan function will stop
automatically, if the channel
from where it has been started
is reached again.
왘 To stop the Scan function
manually: Press
.
Tuning to a channel via the
channel list
The channel list contains only
channels you have subscribed.
왘 In the XM
®
Satellite Radio
main menu, select
Channel
List
.
The channel list appears.
웇: Currently tuned channel
Channel number
Channel name
Channel list
왘 To tune to a channel: Select
the desired channel.
Tuning to a channel via the
category list
왘 In the XM
®
Satellite Radio
main menu, select
Category
List
.
The category list appears.
웇: Currently active category
Category list
왘 Select the desired category.
A channel list according to the
selected category appears.
Going back to the category list
웇: Currently tuned channel
Channel number
Channel name
왘 Select the desired channel.
왘 To go back to the category
list: Press
or select the
menu item
.
Storing channels
Storing a channel via the Tune
& Seek menu
왘 In the XM
®
Satellite Radio
main menu, select
Tune &
Seek
.
The Tune & Seek menu
appears.
Tune & Seek menu
왘 To tune to a channel:
Turn
.
왘 Option 1 to request the
channel preset list: After
tuning to the desired channel,
push
.
The Options menu appears.
Menu item Store to Presets
Options menu
왘왘
#HMC QRG DIS.book Seite 11 Freitag, 7. Mai 2010 3:43 15
12
XM Satellite Radio mode
왘 Select Store to Presets.
The channel preset list
appears.
왘 Option 2 to request the
channel preset list: After
tuning to the desired channel,
press and hold
until the
channel preset list appears.
왘 To store the channel: Select
the desired preset.
Storing a channel via the
channel presets
왘 In the XM
®
Satellite Radio
main menu, select
Presets.
The presets appear.
Currently tuned channel
Preset number 3
왘 To select a preset (e.g.
preset number 3): Highlight
the preset number 3.
왘 Option 1 to store the
currently tuned channel in
the preset number 3: Press
and hold
until the channel
is stored.
왘 Option 2 to store the
currently tuned channel in
the preset number 3:
Push
.
The Options menu appears.
Menu item Store Channel
Options menu
왘 Select Store Channel.
The channel is stored.
Storing a channel via the
channel list
왘
In the XM
®
Satellite Radio
main menu, select
Channel
List
.
The channel list appears.
웇: Currently tuned channel
Channel number
Channel name
Channel list
왘 To store the currently tuned
channel: Highlight the
currently tuned channel and
push
.
The Options menu appears.
Menu item Store Channel
Options menu
왘 In the Options menu, select
Store Channel.
The channel preset list
appears.
왘 In the channel preset list,
select the desired preset.
The channel is stored.
#HMC QRG DIS.book Seite 12 Freitag, 7. Mai 2010 3:43 15
13
DISC mode
Loading/ejecting a disc
The Driver Information System
features a built-in disc changer
magazine with six
compartments.
Disc slot
Ejecting a disc
Loading a disc
Loading one disc
왘 Briefly press .
The system will prompt you to
insert a disc with the message
Please insert Disc.
왘 Insert a disc into the slot.
The system will load the disc
and then play it.
Loading more than one disc
왘 Press and hold .
왘 Insert the next disc only when
prompted with the message
Please insert Disc.
Ejecting one disc
왘
Briefly press .
The system will eject the last
disc played if available.
왘
Remove the disc from the slot
.
Ejecting more than one disc
왘 Press and hold
.
왘
Remove the discs from the slot
one after another.
Opening the DISC main menu
At least one disc must be
loaded.
왘 Press .
왘 If the system switches to AUX
mode: Press
again.
DISC main menu during
playback
Illustration shows audio CD playback
Currently active mode
DISC main menu with list of
discs
Currently active entertainment
source
Track currently playing
Track list of the disc currently
playing (MP3: or folder list)
Name of the disc currently
playing
:
track currently playing
(MP3: or current folder)
Disc currently playing
Icon for an audio CD
: disc currently playing
Audio disc playback
Selecting and playing discs
왘
Select an audio disc in the list
of discs in the DISC main
menu.
Pausing/resuming playback
왘 In the track list, select the track
currently playing.
The system will pause or
resume playback, depending
on the previous status.
= pause
= play
Selecting tracks/folders
Selecting folders is only
available for MP3 or wma discs.
Folders can only be selected if
the audio files were organized
into folders when the disc was
created.
왘왘
#HMC QRG DIS.book Seite 13 Freitag, 7. Mai 2010 3:43 15
14
DISC mode
Illustration shows the folder/track list of a
MP3 disc
Moving to the upper folder
Folder
: Track currently playing
Track
Highlighted track
Track/folder list
왘 To switch to the next folder
level up: Select
.
왘 To open a folder: Select the
desired folder.
왘 To play a track: Select the
desired track.
Skipping tracks forward/back
왘 Press or on the
steering wheel.
Fast forwarding/reversing
왘
In the track list, highlight any
track and push
.
The Options menu appears.
Options menu
왘 To start forwarding/
reversing: Highlight
FF or
REW. Then press and
hold
.
왘 To terminate forwarding/
reversing: Release
.
Repeating a track/folder and
random play
Folder
Highlighted track
Track
Repeating a track/folder
왘
Repeating a track: Highlight
the desired track.
or
왘 Repeating a folder: Highlight
the desired folder.
왘 To open the Options menu:
Push
.
왘 Select Repeat Track or
Repeat Folder.
= function switched on
= function switched off
Random play
왘
Random play of all tracks:
Highlight the track currently
playing.
or
왘 Random play within a
specific folder: Highlight the
desired folder.
왘 To open the Options menu:
Push
.
왘 In the Options menu, select
Random Disc or Random
Folder
.
= function switched on
= function switched off
Scan function
왘 In the track list, highlight the
track from which you want the
function to start.
왘 Push .
The Options menu appears.
#HMC QRG DIS.book Seite 14 Freitag, 7. Mai 2010 3:43 15
15
DISC mode
Options menu
왘 To switch the function on/
off: Select
Scan.
= function switched on
= function switched off
Video DVD/CD playback
The video playback function is
only available with the gear in
P
(Park).
Switching to DISC mode and
starting video DVD/CD
playback
At least one video DVD/CD
must be loaded.
왘 Press .
왘 If the system switches to AUX
mode: Press
again.
Illustration shows video DVD playback
Currently active mode
DISC main menu with list of
discs
Currently active entertainment
source
Chapter or track currently
playing
Content area with native video
DVD menu or navtive video
CD menu
Name of the disc currently
playing
Open the Settings menu
Highlighted disc
Disc type icon ( = video
DVD, = video CD)
: disc currently playing
왘 To play a disc: Select a video
DVD/CD in the list of discs in
the DISC main menu.
Opening the DISC main menu
during video playback
왘 Press and hold
until the
DISC main menu appears
.
왘 To return to the video full-
screen display: Press
.
Audio and Video Settings
왘
In the DISC main menu, select
Settings.
The Settings selection menu
appears.
Settings selection menu
Audio settings
왘 In the Settings selection
menu, select
Audio.
The Audio Settings menu
appears.
Audio Settings menu
왘 To set the balance/fader:
See the section “Setting the
balance/fader” on page 7.
왘 To set the treble/mid/bass:
See the section “Setting the
treble/mid/bass” on page 7.
왘 To switch surround on/off:
See the section “Switching
surround on/off” on page 8.
Video settings
왘 In the Settings selection
menu, select
Video.
The Video Settings menu
appears.
왘왘
#HMC QRG DIS.book Seite 15 Freitag, 7. Mai 2010 3:43 15
16
DISC mode
Video Settings menu
왘 To set the aspect ratio:
Select
Aspect Ratio to open
the aspect ratio menu and
select the desired setting.
왘 To set the brightness, color
or contrast: Select
Brightness, Color
or
Contrast and turn
until the desired setting is
reached.
The system saves the settings
automatically.
Native video DVD menu
The native video DVD menu
includes the following functions:
웇 Returning to video DVD full-
screen display
웇 DVD top menu/DVD menu
which is part of the DVD itself.
웇 Chapter list
웇 Selecting titles
웇 Switching subtitles on/off
웇 Switching audio track
웇 Switching viewing angle
Depending on the content of the
DVD currently playing, certain
menu items may have no
function even though they are
displayed.
Opening the native video DVD
menu
왘 During video DVD playback,
press
.
The native video DVD menu
appears.
Native video DVD menu
Example of a function:
Selecting titles
왘
In the native video DVD menu,
select
Title List.
The title list appears.
왘 Select the desired title.
Native video CD menu
The native video DVD menu
includes the following functions:
웇 Returning to video CD full-
screen display
웇 Switching the display of the
PBC (Playback Control) menu
on/off
웇 Opening the PBC menu
웇 Calling up the track list
Depending on the content of the
video CD currently playing,
certain menu items may have
no function even though they
are displayed.
Opening the native video CD
menu
왘
During video CD playback,
press
.
The native video CD menu
appears.
Native video CD menu
Example of a function:
Selecting tracks
왘
In the native video CD menu,
select
Track List.
The track list appears.
왘 Select the desired track.
#HMC QRG DIS.book Seite 16 Freitag, 7. Mai 2010 3:43 15
17
DISC mode/AUX mode
Video DVD/CD on-screen
menu
왘 During video DVD/CD
playback, press
.
The video DVD/CD on-screen
menu will be shown over the
video currently playing.
Illustration shows video DVD on-screen
menu
Pause/resume playback
Skip chapter back
Skip chapter forward
Open the native DVD/CD
menu
Close the on-screen menu
Call up the chapter list (video
DVD) or the track list (video
CD)
Fast reverse
Fast forward
Shows the selected menu item
-
Depending on the content of the
disc currently playing, certain
menu items may have no
function even though they are
displayed.
Pausing/resuming playback
왘
Select .
The system will pause or
resume playback, depending
on the previous status.
Skippping chapters
왘 Select or .
Fast reversing/forwarding
왘
Highlight or , thenpress
and hold
.
왘 To terminate fast reversing/
forwarding, release
.
Connecting an AUX device
3.5 mm (0.14") jack socket
USB socket
Supported signal sources
You can connect the following
signal sources to the Driver
Information System:
웇 3rd to 5th generation iPod
®
or
iPod
®
Mini
iPod
®
is a trademark of Apple
Inc.
웇 USB memory stick containing
audio files
웇 AUX signal source
(commercially available audio/
video signal source)
AUX main menu
왘
Press .
왘 If the system switches to DISC
mode: Press
again.
Illustration shows iPod
®
playback
Currently active mode
AUX main menu with list of
signal sources
Currently active entertainment
source
: Track currently playing
Track currently playing
Content area with track list
(Blue frame = area active)
Top category of the track
currently playing
#HMC QRG DIS.book Seite 17 Freitag, 7. Mai 2010 3:43 15
18
AUX mode
iPod
®
playback
Please use a special iPod
®
cable available for purchase at
a Hyundai dealership for proper
operation.
Starting playback
왘
Connect an iPod
®
mobile
digital device or open the AUX
main menu.
Playback of the currently
active track in the iPod
®
mobile digital device will be
continued.
Opening the iPod
®
menu
왘 During iPod
®
playback
push
oruntil the
content area is active (blue
frame around it).
Blue frame
Content area
왘 With the content area active,
press
repeatedly until
the iPod
®
menu appears.
iPod
®
menu
Navigating within the iPod
®
menu
왘 Forwards: Select a menu
item in the iPod
®
menu.
왘 Backwards: Press .
왘 To play a track: Select the
desired track.
USB playback
Starting playback
왘 Option 1: Connect an USB
memory stick containing audio
files.
왘 Option 2: Open the AUX main
menu and, if necessary, select
the USB stick as the signal
source.
Selecting tracks/folders
Moving to the upper folder
Folder
: Track currently playing
Track
Highlighted track
Track/folder list
왘 To switch to the next folder
level up: Select
.
왘 To open a folder: Select the
desired folder.
You will see the tracks stored
in this folder.
왘 To play a track: Select the
desired track.
iPod
®
and USB playback
functions
Pausing/resuming playback
왘
Highlight the track currently
playing and press
.
The play icon
or the pause
icon
shows the
corresponding status.
Skipping tracks forward/back
왘
Press or on the
steering wheel.
Fast forwarding/reversing
왘 Highlight any track and
push
once .
왘 To start forwarding/
reversing: Select
FF or REW.
Then press and hold
.
왘 To terminate forwarding/
reversing: Release
.
#HMC QRG DIS.book Seite 18 Freitag, 7. Mai 2010 3:43 15
19
AUX mode
Repeating a track/folder and
random play (only USB)
Folder
Track
Highlighted track
Repeating a track/folder
왘
Repeating a track: Highlight
the desired track.
or
왘 Repeating a folder: Highlight
the desired folder.
왘 To open the Options menu:
Push
.
왘 To switch a function on/off:
In the Options menu, select
Repeat Track or Repeat
Folder
.
= function switched on
= function switched off
Random play
왘
Random play of all tracks:
Highlight the track currently
playing.
or
왘 Random play within a
specific folder: Highlight the
desired folder.
왘 To open the Options menu:
Push
.
왘 To switch a function on/off:
In the Options menu, select
Random Track or Random
Folder
.
= function switched on
= function switched off
Repeating a track and random
setting (only iPod
®
)
Repeating a track
왘
Highlight the desired track.
왘 To open the Options menu:
Push
.
왘 To switch the function on/
off: In the Options menu,
select
Repeat Track.
= function switched on
= function switched off
Random setting
The random setting switches
the shuffle song function of the
iPod
®
mobile digital device on
or off.
왘 Highlight any track.
왘 To open the Options menu:
Push
.
왘 To switch the function on/
off: In the Options menu,
select Random.
= function switched on
= function switched off
Scan function (only USB)
왘
Highlight the track from which
you want the function to start.
왘 To open the Options menu:
Push
.
왘 To switch the function on/
off: In the Options menu,
select
Scan.
= function switched on
= function switched off
AUX source playback
왘
Connect an AUX (audio/video)
signal source.
왘 If necessary, select the
desired signal source in the
AUX main menu.
The AUX full-screen display
appears.
왘 Start playback on the AUX
signal source.
왘 To open the AUX main menu
during AUX source
playback: Press
.
왘 To return to the AUX full-
screen display: Press
.
#HMC QRG DIS.book Seite 19 Freitag, 7. Mai 2010 3:43 15
/
