Arkon GN097-USB Datasheet

Arkon
Brand
Arkon
Model
GN097-USB
Category
Holders
Type
Datasheet

Arkon GN097-USB is a lighter socket mount with USB power outlet, designed for Garmin GPS devices. It features a 12V-24V input and a 5V, 500mA output, allowing you to power and charge your device while driving. The adjustable pedestal arm and 17mm ball joint enable you to position your GPS device at the optimal viewing angle. Installation is simple: insert the DC power plug into your vehicle's lighter socket, attach the USB power connector to your device, and insert the mount ball into the Garmin device or cradle.

Arkon GN097-USB is a lighter socket mount with USB power outlet, designed for Garmin GPS devices. It features a 12V-24V input and a 5V, 500mA output, allowing you to power and charge your device while driving. The adjustable pedestal arm and 17mm ball joint enable you to position your GPS device at the optimal viewing angle. Installation is simple: insert the DC power plug into your vehicle's lighter socket, attach the USB power connector to your device, and insert the mount ball into the Garmin device or cradle.

GN097-USB
|
Lighter Socket Mount with USB Power for Garmin GPS
!
Safety Precautions
Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no responsi-
bility of liability for injury or death as a result of car crashes and / or
air bag deployment.
Arkon is not responsible for any damages caused to your car, your
device, or yourself due to the installation or use of this pedestal mount.
The Mobile Mounting Specialists™
www.arkon.com
Arcadia, CA 91006 USA
Designed in USA | Made in Taiwan
© Copyright 2009 Arkon Resources, Inc.
Consumer Hotline:
USA (800) 841-0884
INT’L (626) 254-9005
Monday - Friday 9 am - 5 pm, PST
Package Contents:
(1) GN097-USB - 12V / Lighter socket mount with USB power outlet
Do not place mount in or near an air bag deployment
zone or where it will obstruct view of the road.
!
GN097-USB
Lighter socket mount
for Garmin
Mount Installation Instructions
Insert the DC Power plug (A) completely into the vehicle’s
12V / lighter socket.
Adjust the angle of the pedestal arm by tightening the
adjustment knob (B) to the desired placement angle.
If necessary, adjust the rotation of the mounting head by
tightening the screw (C) with a screwdriver.
Adjust the angle of the 17mm ball by tightening the wing
nut (D) to the desired mounting angle.
Step 1.
Step 2.
Step 3.
Step 4.
A
B
C
D
Attach the USB power connector to the device or cradle
(not included) before inserting the mount ball into the
Garmin device.
Note: The mini USB power connector will only power /
charge your device. Inserting the power connector in a
mini USB sync port (if it has one) will not provide power
to the device.
Carefully insert the ball into the cavity of your Garmin
device or cradle. Rotate and adjust angles as needed.
Step 1.
Step 2.
Garmin Device Attachment
(Device sold
separately)
Specs: Input (12V - 24V) outlets, Output (5V, 500mA)
Make sure the power mentioned in the specs is compatible
with your device prior to use.
  • Page 1 1

Arkon GN097-USB Datasheet

Arkon
Brand
Arkon
Model
GN097-USB
Category
Holders
Type
Datasheet

Arkon GN097-USB is a lighter socket mount with USB power outlet, designed for Garmin GPS devices. It features a 12V-24V input and a 5V, 500mA output, allowing you to power and charge your device while driving. The adjustable pedestal arm and 17mm ball joint enable you to position your GPS device at the optimal viewing angle. Installation is simple: insert the DC power plug into your vehicle's lighter socket, attach the USB power connector to your device, and insert the mount ball into the Garmin device or cradle.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents