Hatteland JH 21C09 DSK User manual

Brand
Hatteland
Model
JH 21C09 DSK
Category
Monitors CRT
Type
User manual
21” CRT
JH 21C09 DSK
21 inch Marine Desktop Color Monitor
Jakob Hatteland Display AS
Åmsosen, N-5578 Nedre Vats, Norway
Phone: +47 5276 3700, Fax: +47 5276 5444
www.hatteland.com
Jakob Hatteland Display AS
Created : 11 Jul, 2001
Modifi ed : 13 Nov, 2001 Created by: Stein Eikesdal
Title : IND100015-1
Subject : JH21C09DSK-UserManual
Description: Internet release for customers. Rev.2
Product: JH 21C09DSK
CONTENTS Product: JH 21C09DSK
JH 21C09 DSK - 21 inch Marine Desktop Color Monitor
CONTENTS:
OPERATION........................................................................................................... 3
Power switch, Power Light Indicator, Degauss..................................................... 3
USER CONTROLS PANEL.................................................................................... 4
User Controls, Input Select, Power LED Indicator................................................4
Select Functions / Adjust buttons......................................................................... 4
OSD MENU USAGE............................................................................................... 5
Language Select, Brightness & Contrast, Horizontal Pos., Horizontal Size......... 5
Vertical Pos., Vertical Size, Rotation, Pincushion, Trapezoid, Right Pincushion...5
Right Trapezoid, Color Select, Color Balance...................................................... 5
USAGE / STORE.................................................................................................... 6
Horizontal Moire, Vertical Moire, Store................................................................. 6
PHYSICAL CONNECTIONS.................................................................................. 7
VGA Signal, Power Terminal................................................................................ 7
PIN ASSIGNMENTS............................................................................................... 8
VGA 15P D-SUB (Input1, Input2)......................................................................... 8
SIGNAL CHECKING.............................................................................................. 9
Signal Check, Automatic Signal Check............................................................... 9
Video Muting....................................................................................................... 10
PRESETS / POWER SAVING................................................................................ 11
Preset Signal Timing Table, Power Saving, Plug & Play...................................... 11
NOTES.................................................................................................................... 12
SPECIFICATIONS.................................................................................................. 13
2
Features:
This color monitor is an industrialized version of a high quality Hitachi based
monitor. The monitor allows you to display professional applications with clarity
and enhanced color and image quality. The monitor provides you with automatic
compatibility with multiple upgrading platforms and a vast array of graphics
standards allowing resolution upgrades without upgrading the monitor.
The monitor is tested according to the maritime standard IEC945-3.
This is a technically lighter desktop monitor of the Hatteland monitor type
JH 21C06 version.
OPERATION Product: JH 21C09DSK
POWER SWITCH:
Power ON:
To turn the monitor on, press the power switch.
The power light indicator (Power LED) will turn green.
Note: If no VGA signal sync is present, it will turn orange after 10 seconds and the
message “NO SYNC. SIGNAL” will be shown in the display.
Power OFF:
To turn the monitor off, press the power switch.
DEGAUSS - To manually degauss the picture press this button. This function will remove any
color impuritites that may be visible in the picture.
Note: - The monitor degausses itself during intital power up. Wait at least 10 minutes
before repeating this function.
Power SwitchPower Light Indicator
Product: JH 21C09DSK
3
Degauss Button
USER CONTROLS PANEL Product: JH 21C09DSK
USER CONTROLS:
The On Screen Manager (OSD EasyMenu) controls are located on the left side of the monitor. To begin
adjusting any of the monitor’s functions, press then desired function item, and then refer to the table
below to make any changes to the picture. Below follows a rough guide to what these user controls
buttons stand for.
INPUT SELECT:
This CRT monitor have two input terminals in the back. This will let the user to connect two computers
simultaneously. The user may select any of the inputs to display by pressing the “Input Select” button.
SELECT FUNCTIONS BUTTONS / ADJUST BUTTONS:
Any picture adjustments can be viewed or modifi ed by pressing any of these buttons. This will bring up an
EasyMenu showing it’s function. Every function can be adjusted using the “Adjust Buttons” to either
increase or decrease the values.
The EasyMenu will be visible for 6 seconds before it automatically disappears. Pressing the same
button will also close the EasyMenu. When any of the “Adjust Buttons” are pressed, a purple color
will indicate that the selected function is active and are now beeing modifi ed. A slider will also
indicate the adjustment.
Product: JH 21C09DSK
4
Input Select
Select Function Buttons
Adjust Buttons
OSD MENU USAGE Product: JH 21C09DSK
AVAILABLE FUNCTIONS:
Each of the “function buttons” have two sets of parameters that can be modifi ed. One upper parameter
and one lower parameter. To modify any of the parameters use either of the “adjust buttons” sets.
The EasyMenu display will also indicate what parameter is beeing modfi ed. Some of the parameters
requires the user to press two “functions buttons” simultaneous. This will be shown in the table below.
Upper Parameter are adjusted with these buttons:
Lower Parameter are adjusted with these buttons:
Product: JH 21C09DSK
5
PARAMETER FUNCTION BUTTON ADJUST BUTTON
Language Select and or
Contrast or
Brightness or
H.Position or
H.Size or
V.Position or
V.Size or
Rotation or
Pincushion or
Trapezoid or
Right Pincushion or
Right Trapezoid or
Color Select or
Color Balance
Red and or
Green and or
Blue and or
Color This function is only valid when and
reset the user already has entered the
color balance parameter menu.
(As described above)
RESULT
Choose between these languages:
ENGLISH, DEUTSCH, ESPANOL, ITALIANO and
FRANCAIS. Will affect all of the menus and messages.
Makes Contrast darker/brighter excluding background.
Makes Brightness darker/brighter including background.
Moves the position of the picture left or right
Shrinks or expands the picture horizontally.
Moves the position of the picture down or up.
Shrinks or expands the picture vertically.
Rotates the picture counter clockwise or clockwise.
Curves the left and right sides inwards or outwards.
Shrinks or expands the top and bottom side.
Curves the right side inwards or outwards.
Shrinks or expands the right top side+right bottom side.
Choose the color warmth (Kelvin Degree) of the picture.
Available modes are: No 1:9300K, No 2:6500K,
No 3:5000K and No 4:USER (if available)
Decrease or increase the intensity of the red color.
Decrease or increase the intensity of the green color.
Decrease of increase the intensity of the blue color.
Pressing these two buttons simultaneously will cancel
the currently adjusted color mode, and recalls the
previously selected color mode, before entering the
color balance parameter menu.
NOTE:
- When EasyMenu is not shown, the user can start the adjustment of Contrast and Brightness only, without pressing any of the “Select Function Buttons”
- It is recommended to follow the following procedures for the adjustment of distortions;
(1) “Rotation” - (2) “Pincushion” and “Trapezoid” (Adjust the right side) - (3) “Right Pincushion” and “Right Trapezoid” (Adjust the right side)
- The mode “No 4:USER” is not factory preset, it can be programmed by the user - if desired.
After adjustment of “Color Balance” (Red, Green or Blue) and “STORE” (refer to page 5), the user’s color balance preset can be restored by selecting “No 4:USER”
continues....
USAGE / STORE Product: JH 21C09DSK
Product: JH 21C09DSK
6
PARAMETER FUNCTION BUTTON ADJUST BUTTON
or
H. Moire Reduction and
or
or
V. Moire Reduction and
or
RESULT
Stops or operates the horizontal moire changing circuit.
Increases or decreases the strength of the horizontal
moire changing circuit.
Stops or operates the vertical moire changing circuit.
Increases or decreases the strength of the vertical
moire changing circuit.
NOTE:
- Moire may appear on the screen due to interference between CRT dot pitch and video signal by conditions of
video image, display size, display brightness etc.
Adjust the conditions of display size, display brightness etc, before trying the adjustment of moire.
- In some cases, this function may cause deterioration of display quality, such as focus, jitter etc.
- The condition of the moire changing circuit will be indicated by pressing any of the “Select Function Buttons” or
“Adjust Buttons”, and will be displayed in the lower left corner of the EasyMenu as its own icon. See below.
AVAILABLE FUNCTIONS: (continued)
Moire changing circuit condition:
Indicated Symbol Horizontal Vertical
ON ON
ON OFF
OFF ON
not indicated OFF OFF
STORE:
The user can store the display settings. Only one setting is allowed for each video mode.
These geometry settings will be saved automatically when the EasyMenu is exited:
H.POSITION, H.SIZE, V.POSITION, V.SIZE, PINCUSHION, TRAPEZOID, RIGHT PINCUSHION,
RIGHT TRAPEZOID, H.MOIRE REDUCTION, and V.MOIRE REDUCTION.
PHYSICAL CONNECTIONS Product: JH 21C09DSK
Rear side of monitor
SIGNAL INPUTS:
There are two signal inputs connectors allowing you to display two signals from separate sources.
Connect the VGA cable to the desired D-SUB 15P Connector (female) on the rear side of the monitor.
If possible, screw the VGA cable to the D-SUB connector and make sure you don’t bend any of the
pins inside the connector. Connect the other end of the cable to the VGA output of your computer, and
fasten it there also.
POWER TERMINAL:
Make sure the monitor is turned off before connecting. Insert the powercable into the 220 VDC
power terminal.
Product: JH 21C09DSK
7
Signal Inputs:
Input 1
Input 2
Power Terminal
PIN ASSIGNMENTS Product: JH 21C09DSK
VGA D-SUB 15P CONNECTORS FEMALE:
Pin Number: Description (Input 1): Description (Input 2):
1 red video red video
2 green video (sync. optional) green video (sync. optional)
3 blue video blue video
4 no pin no pin
5 no connection no connection
6 red ground red ground
7 green ground green ground
8 blue ground blue ground
9 no connection no connection
10 ground ground
11 no connection no connection
12 bi-directional data (SDA) no connection
13 horizontal sync. (or H/V) horizontal sync. (or H/V)
14 vertical sync. (VCLK) vertical sync.
15 data clock (SCL) no connection
Product: JH 21C09DSK
8
5 4 3 2 1
10 9 8 7 6
15 14 13 12 11
SIGNAL CHECKING Product: JH 21C09DSK
SIGNAL CHECK:
To refer to the input signal condition, press any of the adjust buttons.
The horizontal and vertical frequency will be indicated in the lower part of the picture.
Above: Sample of “Input Select” EasyMenu.
AUTOMATIC SIGNAL CHECK:
When the CRT monitor has detected the change of the signal input condition, it will indicate the
condition automatically, as follows:
Indication 1:
The EasyMenu indicates the resolution
and vertical frequency. Precision
frequency +/- 2khz approx.
Condition 1:
The monitor detects proper signal.
Solution 1:
No action is needed.
Above: Sample of EasyMenu.
Indication 2:
The monitor indicates the message
“POWER SAVE” for 5 seconds.
Condition 2:
The monitor detects no sync. signal
Solution 2:
Verify power switch of the computer and check cable connection.
Above: Sample of POWER SAVE condition.
continues....
Product: JH 21C09DSK
9
SIGNAL CHECKING Product: JH 21C09DSK
Indication 3:
The Power Light Indicator fl ashes.
Condition 3:
This happens when the monitor will
go into the power saving mode.
(Refer to page 6)
Solution 3:
Verify power switch of the computer and check cable connection.
Indication 4:
The EasyMenu indicates the
message “INVALID SCAN FREQ”.
Condition 4:
This will happen when the monitor detects a
sync. signal which is out of set-up specifi cation
or is unstable.
Solution 4:
Verify the specifi cation of input signal.
Above: Sample of INVALID SCAN FREQ condition.
VIDEO MUTING:
When the monitor has detected the change of the input signal condition, the monitor mutes the
picture automatically. This function hides scrambled images which may appear during the changing
period of the input signal. The muting period may vary as it can take a while before the replaced input
signal has become stable or not.
Product: JH 21C09DSK
10
PRESETS / POWER SAVING Product: JH 21C09DSK
PRESET SIGNAL TIMING TABLE:
Microprocessor-based preset functions can store 26 sets of geometry settings including the
standard settings. The following industrial standard settings have been pre-programmed by
the factory.
Preset Resolution Vert. Frequency(Hz) Horiz. Frequency(Hz) Video Mode
01: 640 x 400 70 31.47 VGA
02: 800 x 600 85 53.67 VESA
03: 1024 x 768 85 68.68 VESA
04: 1280 x 1024 85 91.15 VESA
05: 1600 x 1200 90 112.50 VESA
06: 1856 x 1392 72 102.95
Note: - Input signals with approximately the same frequencies may be regarded as the same
signal.
- Standard settings are subject to change without notice.
POWER SAVING SYSTEM:
This monitor complies with VESA and ENERGY STAR© power saving requirements. The power
saving system works only when used with VESA DPMS compliant PC’s and/or graphic controllers.
VESA DPMS Power Saving States
MODE VIDEO H.Sync. V.Sync. Power Power LED
ON Active Yes Yes 130 W (typical) Lighting Green
Stand-by Blanked No Yes less than 15W Flashing quickly
Suspend Blanked Yes No less than 15W Flashing quickly
OFF Blanked No No less than 5W Flashing slowly
Note: - When the user switch the power OFF during the monitor is in OFF mode, sometimes
the LED fl ashes continues a few seconds afterwards. This is not an failure.
PLUG & PLAY:
This monitor complies with VESA DDC1/2B specifi cations. Plug & Play is a system with computer,
peripherals (including monitors) and operating systems. It works when the monitor is connected to
DDC ready computer, which is running an operating system software that incorporates Plug & Play
functionality.
Product: JH 21C09DSK
11
NOTES Product: JH 21C09DSK
Product: JH 21C09DSK
12
CRT characteristics:
CRT size : 21” / 533 mm
Viewable image size : 20” / 508 mm
Horizontal mask pitch : 406 x 305 mm
Deflection : 90 deg.
Tube:
Flat square, black matrix, Advanced Elliptical Aperture
electron gun with Multistep Dynamic Focussing (A-EA-MDF)
Input Signal:
Video: Analogue 0.7V p-p 75 ohm
Sync: H/V separate TTL, H/V composite TTL, sync. on
green, automatic sync. mode detection
Display Colors Analog Input:
Unlimited colors
(Depending on the graphics board)
Light Intensity:
All white screen : > 85 cd/m
2
All black screen : < 0,01 cd/m
2
Synchronization Range:
Horizontal : 31 kHz to 115 kHz (Automatically)
Vertical : 50 Hz to 160 Hz (Automatically)
Resolutions:
Maximum : 1800 x 1350 @ 75 Hz
Recommended : 1280 x 1024 @ 85 Hz
Video Clock Frequency:
230 MHz
Presets:
27 (21 user-programmable, 6 factory settings)
Power Supply:
Universal Power Supply:
AC 100 - 120 V, 50/60 Hz or
AC 220 - 240 V, 50/60 Hz
Power Consumption:
130 W (typical), 145W max
Environmental Considerations:
Operating:
Temperature -15 deg. C to +55 deg. C
Humidity 30% to 93% (non condensing)
Storage:
Temperature -20 deg. C to +60 deg. C
Humidity 10% to 90% (non condensing)
Dimensions:
488 (W) x 477 (H) x 470 mm
Weight:
28.5 kg
Input Signal Terminals:
2 x mini D-SUB 15P connector (female)
User Controls:
Power switch
On Screen Manager Controls:
Degauss switch (manual / auto)
Brightness control
Contrast control
Adjustment controls
Input Select
For additional information, datasheets and
support for this product, please visit our
website: http://www.hatteland.com/jhd
SPECIFICATIONS Product: JH 21C09DSK
Specifi cation and design are subject to change without notice.
Product: JH 21C09DSK
13
Jakob Hatteland Display AS
Åmsosen, N-5578 Nedre Vats, Norway
Phone : +47 5276 3700
Fax : +47 5276 5444
E-mail : [email protected]
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13

Hatteland JH 21C09 DSK User manual

Brand
Hatteland
Model
JH 21C09 DSK
Category
Monitors CRT
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents