DATA SHEET
0" Oven
DATE: 1.10.2019
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit fisherpaykel.com
1232
569
DATUM : BOTTOM OF CHASSIS
A
F
DATUM : FRONT OF CHASSIS
DATUM : FRONT OF CHASSIS
o
k
FRONT VIEW
PLAN VIEW
PROFILE VIEW
D
h
l
t
E
G
p
B
C
760
Model no:
OB30DDPTDX1
(refer page 1 for imperial measurements)
Product Dimensions
a Overall height of oven
B Overall width of oven
c Depth of front frame (excludes handle, front stainless steel trim
and dial)
d Depth of oven chassis and front frame (excludes handle, front
stainless steel trim and dial)
E Depth of chassis
F Height of chassis
G Width of chassis
h Height of control panel
i Height of stainless steel trim on control panel
j Height of stainless steel trim on upper and lower door
k Height from bottom datum to top of upper oven door
l Height from bottom datum to centerline of upper handle
m Height from bottom datum to top of lower oven door
n Height from bottom datum to centerline of lower handle
o Height from bottom datum to bottom of lower door
p Height from bottom datum to bottom of upper door
q Width of handle
r Depth of handle
s Thickness of handle
t Depth of lower door (open) (measured from front of door)
u Depth of upper door (open) (measured from front of door)
Minimum Clearances
Minimum inside height of cavity
Minimum inside width of cavity
Minimum inside depth of cavity (proud installation*)
*Flush installation possible. Depending on cabinet panel thickness a rebate
around front frame might be required, refer Installation Manual.
IMPORTANT NOTE: For full installation and clearance details please refer to
our installation manual.
INDICATES PRODUCT DATUM -------------------------------------------
INDICATES CABINETRY CLEARANCES --------------------------------
r
m n
q
i
u
t
j
u
s
POWER
OUTLET
LOCATION