DATA SHEET
0" Oven
DATE: 1.10.2019
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit fisherpaykel.com
Model no:
OB30SDPTDX1
(refer page 1 for imperial measurements)
Product Dimensions
a Overall height of oven
B Overall width of oven
c Depth of front frame (excludes handle, front stainless steel trim
and dial)
d Depth of oven chassis and front frame (excludes handle, front
stainless steel trim and dial)
E Depth of chassis
F Height of chassis
G Width of chassis
H Height of control panel
I Height of stainless steel trim on control panel
J Height of stainless steel trim on door
K Height from bottom datum to top of oven door
L Height from bottom datum to centerline of handle
M Height from bottom datum to bottom of door
N Width of handle
O Depth of handle
P Thickness of handle
Q Depth of door (open) (measured from front of door)
Minimum Clearances
Minimum inside height of cavity
Minimum inside width of cavity
Minimum inside depth of cavity (proud installation*)
*Flush installation possible. Depending on cabinet panel thickness a rebate
around front frame might be required, refer Installation Manual.
IMPORTANT NOTE: For full installation and clearance details please refer to
our installation manual.
INDICATES PRODUCT DATUM -------------------------------------------
INDICATES CABINETRY CLEARANCES --------------------------------
690
569
DATUM : BOTTOM OF CHASSIS
AF
DATUM : FRONT OF CHASSIS
DATUM : FRONT OF CHASSIS
Q
K L
FRONT VIEW
PLAN VIEW
PROFILE VIEW
D
H
I
O
E
G
J
B
C
760
N
Q
P
M
POWER
OUTLET
LOCATION