ANKO Unicorn User manual

UNICORN NEON LIGHT

Contents:

Unicorn Light X1

Light Base X 1

Instructions

Step 1. Install batteries (not supplied) before use, ensuring that the polarisation on the

batteries is correct.

Step 2. Insert the unicorn light into the base as shown in the image below. Light is

connected corrected when you hear a click.

Step 3.

Turn on/off the light switch to operate.

Warnings:

Battery information: Require 3 x 1.5V AA batteries (not included)

BATTERY INSTALLATION BY ADULT IS REQUIRED

OPERATING AND CARE INSTRUCTIONS

-INDOOR USE ONLY

-NEVER MIX DIFFERENT TYPES OR OLD AND NEW BATTERIES

-DO NOT SHORT CIRCUIT SUPPLY TERMINALS OR DISPOSE OF BATTERIES IN FIRE

-REMOVE BATTERIES DURING LONG PERIOD OF NON-USE

-BATTERIES ARE TO BE INSERTED WITH THE CORRECT POLARITY (+ AND -).

Instructions:

 Please read this product manual carefully.

 Read all warnings and follow all instructions in this product manual.

 Use only a microfiber and dry cloth for cleaning the product,

 Operate carefully to not cause any damage by dropping or physical shocking it

 Do not leave the product in excessive heat, high temperatures can cause the product to

malfunction.

 The light source of this luminaire is not replaceable.