2. Halo
  3. mini jumbo dispenser

Halo mini jumbo dispenser Installation guide

  • I have reviewed the installation instructions for the HALO mini jumbo dispenser. This document provides a clear, step-by-step guide on how to install the dispenser, from opening it with the key to fixing it to the wall and loading a paper roll. I understand the process and am ready to answer any questions you might have.
  • What tools are needed for installation?
    What is included in the box?
    How should the unit be fixed to the wall?
Installation instructions for
HALO mini jumbo dispenser
Box Contents:
1 Dispenser
1 Opening Key
4 Fitting Screws and Plugs
Tools Required:
Drill
Screwdriver
Open the unit with the key provided.
1
Mark out the holes for fixings.
Please see the pre-installed
spirit level to aid installation.
2
Drill the marked out holes
to the size of the fixings
provided then use a
screwdriver to fix the unit
to the wall. The unit should
be hand tight to the wall.
3
Add the mini jumbo roll and close the unit.
The unit is now operational.
4
/