LED Shaver Light
243PP, 608PP
For your safety, always switch off the mains supply before adjusting or cleaning and before removing the diffuser.
The light source cannot be replaced due to the risk of damage to the LED chips.
voltage
rocker
The LED module is protected by a shade. This part must be replaced immediately should the
This product contains a light source of energy efficiency class G.
LED driver replacement
Obtain suitable replacement driver - ensuring all technical
specifications match the existing item.
Connect the input cables to terminal marked ‘PRI’.
Connect Blue cable to ‘N’ and Brown cable to ‘L’.
Connect the output cables to the terminal marked ‘SEC’.
Red cable to ‘+’ and black cable to ‘-’.
BLUE
BROWN
RED
BLACK
PRI
MAINS POWER IN
PRI
BLUE / BROWN
SEC
RED / BLACK
03/11/2021
UK Manufacturer:
Kingfisher International Products Limited,
3 Sheldon Square, London, W2 6PX,
United Kingdom.
EU Manufacturer:
Kingfisher International Products B.V.
Rapenburgerstraat 175E,
1011 VM Amsterdam, The Netherlands.
7W LED Module: 4000K/480lm
(Push down on the ends of the product to release).
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Titan TTB805CHR User manual
-
LAP 2967X User manual
-
Blyss HT10SSR User manual
-
-
Erbauer EMIS216S Original Instructions Manual
-
-
Erbauer ERB337TCB Original Instructions Manual
-
GoodHome GHIHAC90a User manual
-
Castorama HE20EPC User manual
-
GoodHome GHIHAC60a User manual
