2. Computers & electronics
  3. Computer cables
  4. Signal cables
  5. screwfix
  6. 243PP
243PP

screwfix 243PP User manual

  • Hello! I've reviewed the user manual for the LAP Shaver Light models 243PP, and 608PP. This document provides information on how to use the shaver socket, care for the product, and safety precautions. The LED light is non-replaceable, and the shaver socket has a 10W transformer and a rocker switch for voltage selection. Feel free to ask any specific questions about the installation or use of the device.
  • What is the maximum power output for the shaver socket?
    How do I switch between 115V and 230V on the shaver socket?
    Can I replace the LED light source?
    What to do if the shade become cracked or damaged?
LED Shaver Light
243PP, 608PP
For your safety, always switch off the mains supply before adjusting or cleaning and before removing the diffuser.
The light source cannot be replaced due to the risk of damage to the LED chips.
voltage
rocker
The LED module is protected by a shade. This part must be replaced immediately should the
This product contains a light source of energy efficiency class G.
LED driver replacement
Obtain suitable replacement driver - ensuring all technical
specifications match the existing item.
Connect the input cables to terminal marked ‘PRI’.
Connect Blue cable to ‘N’ and Brown cable to ‘L’.
Connect the output cables to the terminal marked ‘SEC’.
Red cable to ‘+’ and black cable to ‘-’.
BLUE
BROWN
RED
BLACK
PRI
MAINS POWER IN
PRI
BLUE / BROWN
SEC
RED / BLACK
03/11/2021
UK Manufacturer:
Kingfisher International Products Limited,
3 Sheldon Square, London, W2 6PX,
United Kingdom.
EU Manufacturer:
Kingfisher International Products B.V.
Rapenburgerstraat 175E,
1011 VM Amsterdam, The Netherlands.
7W LED Module: 4000K/480lm
(Push down on the ends of the product to release).
/