GE Profile PEP7036DT User manual

PEP7036DT
GE Profile
Brand
GE Profile
Model
PEP7036DT
Category
Cookers
Type
User manual

GE Profile PEP7036DT, a 36" built-in electric cooktop, offers precision temperature control and guided cooking for perfect results. Its synchronized elements and Chef Connect feature allow for seamless cooking experiences, while the built-in WiFi and compatibility with smart cookware open up a world of possibilities. Glide Touch controls with 11 levels and an easy-clean surface ensure ease of use and maintenance. Safety features like hot surface indicator lights and control lock provide peace of mind. Experience the power of culinary innovation with GE Profile PEP7036DT.

GE Profile PEP7036DT, a 36" built-in electric cooktop, offers precision temperature control and guided cooking for perfect results. Its synchronized elements and Chef Connect feature allow for seamless cooking experiences, while the built-in WiFi and compatibility with smart cookware open up a world of possibilities. Glide Touch controls with 11 levels and an easy-clean surface ensure ease of use and maintenance. Safety features like hot surface indicator lights and control lock provide peace of mind. Experience the power of culinary innovation with GE Profile PEP7036DT.

For answers to your Monogram, GE Café™, GE Profile™ or GE Appliances
product questions, visit our website at geappliances.com or call
GE Answer Center® Service, 800.626.2000.
PEP7036DT
GE Profile™ 36" Built-In Touch-Control Electric Cooktop
ADA
COMPLIANT
Listed by
Underwriters
Laboratories
Specification Revised 10/22
To insure accuracy, it is best to make a
template when cutting the opening in the counter
Cooktop
36-1/8" 20-7/16"
18-7/8" 33-3/4"
19-1/8" to
19-1/4"
33-7/8"
to 34"
2-1/2" MIN.
Required
1-3/4" MIN.
to rear wall
3-9/19" at front of unit and
5-9/16" at conduit location
13" MAX. depth of unprotected
overhead cabinets
30" MIN. Clearance from
countertop to unprotected
overhead surface
2" MIN. Clearance
from cutout to
nearest vertical
wall or cabinet on
left side of the unit
below the 15" MIN.
clearance height.
1 1/2" MIN. (30") and
2" MIN. (36") Clearance
from cutout to nearest
vertical wall or cabinet
on right side of the unit
below the 15" MIN.
clearance height.
36" MIN. for
36" cooktop
15" MIN. height
from countertop
to nearest cabinet
(including light rails)
on both sides of
cooktop
IMPORTANT: Requires a 5" free area between
the bottom of the cooktop to any combustible
material, i.e., shelving. Free area not required
when installing wall oven underneath cooktop.
Refer to installation instructions. Requires a 15"
minimum from cooktop to adjacent overhead
cabinets. Units are furnished with a 48" flexible
armored cable.
NOTE: 36" Ribbon cooktops are approved for
use over select GE 30" Single Wall Ovens and
Warming Drawers. Refer to cooktop and wall
oven/warming drawer installation instructions
packed with product for current dimensional
data. If installed with a GE Telescopic
Downdraft System, consult both the cooktop
and downdraft installation instructions packed
with product before installing. Cooktop gas/
electric supply may need to be re-routed
to install downdraft. The countertop cutout
requires 23-1/2" minimum flat countertop
surface and 25" minimum total countertop
depth. In addition, other clearances to front
edge of the countertop must be considered.
Before installing, consult installation
instructions packed with product for
current dimensional data.
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
APPROXIMATE COOKING DIMENSIONS
VOLTAGE (60HZ AC) 240V 208V
CONNECTED LOAD (MAX.) 9.7kW 7.3kW
CURRENT DRAW (MAX.) 40.4 Amps 35.1 Amps
RECOMMENDED CIRCUIT BREAKER†50 Amps 40 Amps
†NOTE: Check local codes for required breaker size.
2-1/2" MIN
From front edge
of countertop to front
edge of cooktop cutout
31-1/4" MIN
From top surface
of countertop to
top surface of
wall oven support
platform
INSTALLATION ABOVE A WALL OVEN
INSTALLATION ABOVE A WALL OVEN
PEP7036DT
GE Profile™ 36” Built-In Touch-Control Electric Cooktop
Specification Revised 10/22
PP7036DJBB
FEATURES AND BENEFITS
Power Boil on Tri- and Dual-Ring Elementst
Precision Temperature Control
Guided Cooking
Glide Touch Controls - 11 Control Levels
Easy Clean Surface
Synchronized Elements
Chef Connect
Built-in WiFi
Compatible Cooktop with Smart Cookware
Keep Warm Setting
Control Lock
Hot Surface Indicator Lights
Fit Guarantee
Model PEP7036DTBB – Black on black
* OPTIONAL STAINLESS STEEL CLAD ALUMINUM GRIDDLE
Achieve even results with this lightweight griddle, tailored
to fit GE SyncBurners. Order part number JXGRIDL1.
COMPATIBLE COOKTOP WITH SMART COOKWARE
Smart pans easily pair with this smart cooktop to ensure you
get the perfect cooking results. Accessories sold separately.
GUARANTEED FIT
Replacing a similar cooktop from GE Appliances or another
brand? GE cooktops are guaranteed for an exact fit or
GE Appliances will pay up to $100 toward modifications.
Visit geappliances.com for more info.
  • Page 1 1
  • Page 2 2

GE Profile PEP7036DT User manual

PEP7036DT
GE Profile
Brand
GE Profile
Model
PEP7036DT
Category
Cookers
Type
User manual

GE Profile PEP7036DT, a 36" built-in electric cooktop, offers precision temperature control and guided cooking for perfect results. Its synchronized elements and Chef Connect feature allow for seamless cooking experiences, while the built-in WiFi and compatibility with smart cookware open up a world of possibilities. Glide Touch controls with 11 levels and an easy-clean surface ensure ease of use and maintenance. Safety features like hot surface indicator lights and control lock provide peace of mind. Experience the power of culinary innovation with GE Profile PEP7036DT.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents