SoStar KD503 User manual

Type
User manual
Type-C充电口
注:外形以实物为准
触摸开关
指示灯
可更换笔头
1.轻触电容笔顶部开机,指示灯亮蓝色开始使用,再次
轻触电容笔关机,指示灯灭。
Type-C充
轻触开关机
3.可拆卸易更换笔头设计,无需担心磨损!(轻拧笔头即可
轻松拆卸/安装)
下) (
1micro USB/Type-C线,(
线
线线
线)usb,
usb()
2线usb,
5V()
3usb5V
,,
120()
Touch switch
Type-C charging port
Replaceable pen head
Switch indicator
Disassembly install
3.Detachable and replaceable nib design, no need to worry
about wear and tear! (Lightly twist the nib for easy removal
/ installation)
1.Touch the top of the capacitive pen to turn it on, the indicator
light will turn blue and start to use it, again Touch the
capacitive pen to shut down, and the indicator light goes out.
Type-C charging port
Touch switch
1. Please use the standard USB to micro USB data cable to
charge, connect one end to the pen' s USB interface and
the other to the USB interface on the tablet or computer
(FIG 1)
2. Please connect one end of the data cable to the pen and
the other end to the 5V DC power adapter.(FIG 2)
3. The 5V mobile power supply with USB interface is directly
plugged into the touch pen for charging. During the
charging process, the red charging lamp will turn on and
the whole charging time will be about 120 minutes. (FIG
3)
(FIG 1)
(FIG 2)
(FIG 3)
4. The product lasts for up to 12 hours at full power and
does not use intelligent power cut for 5/30 minutes.
  • Page 1 1

SoStar KD503 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages