Smart Service Region allows users to choose where their data is stored using Amazon and Google servers in either the US or Germany and Belgium. It is helpful for those who want to store their data in a specific region due to personal preferences or organizational guidelines. Some products that include the Smart Service Region setting are iQ system software 3.8 and later, SMART Notebook software 21.1 and later, Lumio by SMART, SMART Admin Portal, and SMART Exchange.
Smart Service Region allows users to choose where their data is stored using Amazon and Google servers in either the US or Germany and Belgium. It is helpful for those who want to store their data in a specific region due to personal preferences or organizational guidelines. Some products that include the Smart Service Region setting are iQ system software 3.8 and later, SMART Notebook software 21.1 and later, Lumio by SMART, SMART Admin Portal, and SMART Exchange.
Was this document helpful?
smarttech.com/docfeedback/171776
smarttech.com/kb/171776 1
Quick reference guide
SMARTService Region
SMART Service Region is a setting that allows users to choose where their data is stored. They might
choose based on their own preferences or in accordance with an organization’s guidelines.
There are two service regions:
lGlobal: uses Amazon and Google servers in the US to store user data.
lEuropean: uses Amazon and Google servers in Germany and Belgium to store user data.
For new users, SMART automatically sets their service region based on their IP address and the location
information they’ve provided for their SMARTAccount.
Frequently asked questions
What are the differences
between the service regions?
The SMART Global Service Region uses Amazon and Google servers in
the US to store your data.
The SMART European Service Region uses Amazon and Google servers
in Germany and Belgium to store your data.
Why does SMARTneed to
know my location?
SMART collects location information to help determine which service
region to use for storing a user’s data.
Quick reference guide
SMARTService Region
smarttech.com/kb/171776 2
What countries are part of
the European Service
Region?
The European Service Region includes the following countries:
lÅland Islands
lAlbania
lAndorra
lArmenia
lAustria
lAzerbaijan
lBelarus
lBelgium
lBosnia and
Herzegovina
lBulgaria
lCroatia
lCyprus
lCzechia
lDenmark
lEstonia
lFaroe Islands
lFinland
lFrance
lGeorgia
lGermany
lGreece
lHungary
lIceland
lIreland
lItaly
lKazakhstan
lLatvia
lLiechtenstein
lLithuania
lLuxembourg
lMalta
lMoldova,
Republic of
lMonaco
lMontenegro
lNorthern
Macedonia
lNorway
lNetherlands
lPoland
lPortugal
lRomania
lSan Marino
lSerbia
lSlovakia
lSlovenia
lSpain
lSvalbard and Jan
Mayen
lSweden
lSwitzerland
lTurkey
lUkraine
lHoly See
What countries are part of
the Global Service Region?
The Global Service Region includes any country not listed as part of the
European Service Region.
Which SMART products
include the SMART Service
Region setting?
The SMART Service Region setting is available in the following SMART
products:
liQ system software 3.8 and later
lSMART Notebook software 21.1 and later
lLumio by SMART
lSMARTAdmin Portal
lSMARTExchange
When should users change
their service region?
If you want to change service regions, follow the instructions provided in
Quick reference guide on the previous page.
IMPORTANT
Before changing your service region, make sure you read the Before
you begin section for important details about this change’s effect on
you and other users of SMARTsoftware products.
Quick reference guide
SMARTService Region
smarttech.com/kb/171776 3
I changed my service region.
How can I request my files to
be moved to the new service
region?
Since data (such as existing lesson files) is not automatically transferred
when you choose to change your service region, you can request
SMARTmove that data on the next planned migration date. See page9.
Changing the SMARTService Region
SMARTautomatically assigns users to a service region based on the location information they provide and
their IPaddress. That said, if you’d like to change service regions, you can follow the guidance and steps
provided here.
Before you begin
When you change your service region, you are creating a “new” account. The data you have associated with
your current account will not be moved to your “new” one, but your account’s sign-in credentials remain the
same. The following table identifies what this means for different users of SMARTsoftware:
User How it affects them
Teachers When you change service regions, your existing lesson files are not copied to the new
region. Files need to be uploaded to the new region manually. All the files are
preserved, so if you return to the previous service region, they’re still available.
If you access SMARTsoftware as part of a SMART Learning Suite subscription, you will
need to have your administrator provision you in the new region as well.
Additionally, if you change regions, your students must either connect to your lesson as
a guest, or if they are connecting by signing in to hellosmart.com, change their own
service region to match yours.
Students Students connecting to their teacher’s lesson by signing in to hellosmart.com must be in
the same service region as their teacher. If students are in a different service region,
they can either:
lConnect to the lesson by signing in as a guest on hellosmart.com. When they
connect as guests, they are automatically assigned to the same service region as
their teacher. However, note that connecting as a guest does not work for sharing a
link with your students to access lessons outside of class.
OR
lChange their service region to match their teacher’s and then connect to the lesson
by signing in using their SMARTAccount credentials.
Administrators Changing service regions affects data in the SMARTAdmin Portal. When you change
service regions, you must provision teachers to your organization’s subscription again.
Another important thing to note if you choose to change service regions, is that you must change the region
for all SMART software products used. If you use SMARTNotebook, Lumio by SMART, and a SMARTBoard
display with iQ, you will have to change the service region in each product to avoid issues.
Quick reference guide
SMARTService Region
smarttech.com/kb/171776 4
Changing the service region
Follow the instructions below for the products you use. The service region must match for all
SMARTsoftware you use. Additionally, if you are part of a school or organization where subscriptions are
managed by an administrator in the SMARTAdmin Portal, the service region chosen by teachers must match
the one set in the SMARTAdmin Portal.
NOTE
When you change service regions, it creates a new account for you in your chosen service region. Your
files and data from the original service region are not automatically moved over. You can request to have
SMARTmove your files by following the steps below. See To request to have SMARTmove your files to
the chosen service region on page9.
For administrators
Administrators, or those responsible for managing SMARTsoftware subscriptions in an organization, can
change the service region in the SMARTAdmin Portal following the steps below.
To change the service region in SMARTAdmin Portal
1. Go to adminportal.smarttech-prod.com/login.
2. At the bottom of the sign in page, select the service region drop-down.
The Select service region window opens.
Quick reference guide
SMARTService Region
smarttech.com/kb/171776 5
3. Select either the Global or European service region.
4. Click Done to return to the sign in page.
5. Sign in to the SMARTAdmin portal using the same credentials you had before changing the service
region.
6. When prompted, select a country that belongs to the service region you chose (see page2).
7. Open the Organization tab in the SMART Admin Portal and select the organization that is moving to the
new service region.
The Update organization information dialog box opens.
8. From the Region drop-down, select the same service region as you did in step 3. Then select the same
country as you did in step 6. You may get a warning message that the country selected does not match
the organization’s address, but you can ignore this.
IMPORTANT
Pick the same country for all products you are changing the service region for and make sure all
users, including teachers and students, are aware of what country they should select when changing
service regions.
9. Click Update organization to save your changes.
10. As provisioning data is not moved when you switch service regions, you must re-provision users in the
new service region so they have continued access to their SMARTsoftware.
For teachers
Teachers who use Lumio by SMART, SMARTNotebook, or a SMARTBoard interactive display with iQcan
change their service regions.
Quick reference guide
SMARTService Region
smarttech.com/kb/171776 6
To change the service region in Lumio
1. Go to suite.smarttech-prod.com/login.
2. Under the Teacher sign in and Sign up for free buttons, select the service region drop-down.
The Select service region window opens.
3. Select either the Global or European service region.
4. Click Done.
The window closes and you’ll return to the sign in page.
5. Click Teacher sign in and use the same email and password to sign in as you did before changing
service regions.
Quick reference guide
SMARTService Region
smarttech.com/kb/171776 7
6. When prompted, select a country that belongs to the service region you chose (see page2).
IMPORTANT
Pick the same country for all products you are changing the service region for. If your school or
organization manages your subscription, contact your administrator to ask which country you should
select.
To change the service region in SMARTNotebook
1. In a browser, go to myaccount.smarttech-prod.com.
2. Under the Sign In button, select the service region drop-down.
The Select service region window opens.
3. Select either the Global or European service region.
4. Click Done.
The window closes and you’ll return to the sign in page.
5. Click Sign in and use the same email and password to sign in to SMARTNotebook as you did before
changing service regions.
Quick reference guide
SMARTService Region
smarttech.com/kb/171776 8
6. Follow the on-screen prompts to sign in. If you are asked to select a country, make sure you select a
country that belongs to the service region you chose (see page2).
IMPORTANT
Pick the same country for all products you are changing the service region for. If your school or
organization manages your subscription, contact your administrator to ask which country you should
select.
7. Close the browser.
8. Open SMARTNotebook.
9. If you are signed in, sign out by clicking Account > Sign Out.
10. Click Account > Service Region.
The SMARTCloud window opens.
11. From the Country drop-down, select the same country as the one you selected in step 6.
The service region automatically updates based on the country you select.
12. Click Update.
13. Sign in again to your SMARTAccount by clicking Account > Sign In from the Notebook menu.
To change the service region on SMARTBoard display with iQ
1. Back up any local files saved under My Files > Board Files or My Files > Downloads that you
want to keep.
2. On the display, tap Settings.
Quick reference guide
SMARTService Region
smarttech.com/kb/171776 9
3. Change the country to one that belongs to the service region you chose (see page2).
IMPORTANT
Pick the same country for all products you are changing the service region for. If your school or
organization manages your subscription, contact your administrator to ask which country you should
select.
4. Under Network Settings, tap SMART Cloud > Service Region.
5. Select the service region to use.
The display will restart.
6. Sign in to your SMARTAccount.
To request to have SMARTmove your files to the chosen service region
1. In a browser, go to myaccount.smarttech-prod.com.
2. Under the Sign In button, select the service region drop-down.
3. Select your original default service region to sign in to. This is your original service region where all
your current files are saved that you want to be moved over.
4. Under location, select a country that belongs to the service region you want to move the files to (see
page2).
SMARTwill migrate the data on the next planned migration date.
For students
If your teacher has changed their service region, you can use the guest sign in to join their lesson on
hellosmart.com or change your service region to match theirs.
Quick reference guide
SMARTService Region
smarttech.com/kb/171776 10
To use guest sign in to join your teacher’s lesson
1. Go to hellosmart.com.
2. Tap JOIN AS A GUEST.
The Class ID dialog appears.
3. Enter the class ID number that your teacher gave you in the text box and tap Next.
4. Type your name using letters or numbers only. Special characters like symbols and emojis won’t work.
5. Tap Join as a guest.
Quick reference guide
SMARTService Region
smarttech.com/kb/171776 11
To change your service region to match your teacher’s
1. Go to suite.smarttech-prod.com/student/login.
2. At the bottom of the window, select the service region drop-down.
3. Select either the Global or European service region.
4. Tap Done to return to the sign in page.
5. Tap Sign in and use the same email and password to sign in as you did before. You’ll also need to enter
the class ID your teacher gave you.
6. When prompted, select a country that belongs to the service region you chose (see page2).
Quick reference guide
SMARTService Region
smarttech.com/kb/171776 12
smarttech.com/support
smarttech.com/contactsupport
© 2021SMARTTechnologiesULC. All rights reserved. SMARTBoard, smarttech, the SMART logo and all SMART taglines are trademarks or registered trademarks of
SMARTTechnologiesULC in the U.S. and/or other countries. All third-party product and company names may be trademarks of their respective owners. Contents are subject to
change without notice. December 10, 2021.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
Smart Service Region allows users to choose where their data is stored using Amazon and Google servers in either the US or Germany and Belgium. It is helpful for those who want to store their data in a specific region due to personal preferences or organizational guidelines. Some products that include the Smart Service Region setting are iQ system software 3.8 and later, SMART Notebook software 21.1 and later, Lumio by SMART, SMART Admin Portal, and SMART Exchange.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
SMART Technologies Notebook basic version Installation guide
-
-
-
-
-
-
-
-
-