How to Install
All electrical components must be
installed by a licensed electrician
in accordance with the National
Electric Code and the appropriate
local electrical codes.
®
ASSEMBLY INSTRUCTION MODEL #8867-PN
2.Decide the preferred hanging height and choose the
chain needed.
WARNING: This product can expose you to Lead,
which is known to the State of California to cause cancer
and/or birth defects or reproductive harm. For more
information go to www.P65Warnings.ca.gov
3.Fix the mounting plate to the ceiling and attach the
canopy to the mounting plate.
31.5″
31″
103″
6″
Ø3″
Ø5″
Ø5.5″
1.Hook one end of a rod onto the frame and the other
end onto the lower canopy.Repeat for the other rods.
4.Install the shade onto the socket.
5.Screw the lucite finial on the frame.
You will need 8-Candelabra Bulb
40 Watts Recommended 60 Watts Max
Bulb not included
USE LED BULBS FOR EXTENDED USE
This fixture is DRY rated
