SLAYER Steam LP 3-Group Operating instructions

Brand: SLAYER

Model: Steam LP 3-Group

Type: Operating instructions

Installation Requirements

Slayer Steam LP 3-group

P +1 206 284 7171 F +1 206 284 7766 SUPPORT@SLAYERESPRESSO.COM

707 LIND AVE SW. RENTON, WA 98057

SLAYERESPRESSO.COM

44.5 in / 113 cm

Drip tray edge

3.8 in /

9.65 cm

Ø 3 in / 7.5 cm

28 in / 71 cm

13.75 in / 35 cm

37 in / 94 cm

Water

ﬁlter

Water

line in

Drain

hoses

3/8-inch water line

connects to water system

with shuto valve

43.5 in / 110.5 cm

16.75 in / 42.5 cm

Counter

• Width: 44.5 inches / 113 centimeters

•Depth: 28 inches / 71 centimeters

• Height: 17 inches / 43.2 centimeters

• Weight: 305 lbs / 139 kg (tanks ﬁlled)

Measurements do not include overhanging

components: portaﬁlters.

Water

• 3/8-inch BSP dedicated cold water line with shuto

valve (in North America, 3/8-inch compression

ﬁtting is included)

• Required incoming water pressure:

3 Bar min, 5 Bar max

• Water hardness cannot exceed 50ppm, otherwise

a water softener is needed

Power

• Single-phase: 220-240 v 50/60 hertz, 35 a,

6.3—7.5 kW

• Three-phase: 380-415 v3n, 50/60 hertz, 22 a,

5.8—6.5 kW

• Receptacle: Nema 6-50

Drain

• Open gravity drain located within 4 feet / 1.2 meters

of the machine

• Two (2) drain hoses: 7/8-inch outside diameter,

5/8-inch inside diameter (2.2-centimeter outside

diameter, 1.6-centimeter inside diameter).

• Ensure drain line is always sloping downwards

24.93 in / 63.3 cm

16.68 in / 42.36 cm

17.68 in / 45 cm

16.57 in / 42.1 cm

13.4 in / 34 cm

MAR 2022

SLAYER Steam LP 3-Group Operating instructions

SLAYER Steam LP 3-Group Operating instructions

SLAYER Steam LP 3-Group Operating instructions

Other documents