Installation Requirements
Slayer Steam LP 3-group
P +1 206 284 7171 F +1 206 284 7766 SUPPORT@SLAYERESPRESSO.COM
707 LIND AVE SW. RENTON, WA 98057
SLAYERESPRESSO.COM
44.5 in / 113 cm
Drip tray edge
3.8 in /
9.65 cm
Ø 3 in / 7.5 cm
28 in / 71 cm
13.75 in / 35 cm
37 in / 94 cm
Water
filter
Water
line in
Drain
hoses
3/8-inch water line
connects to water system
with shuto valve
43.5 in / 110.5 cm
16.75 in / 42.5 cm
Counter
• Width: 44.5 inches / 113 centimeters
•Depth: 28 inches / 71 centimeters
• Height: 17 inches / 43.2 centimeters
• Weight: 305 lbs / 139 kg (tanks filled)
Measurements do not include overhanging
components: portafilters.
Water
• 3/8-inch BSP dedicated cold water line with shuto
valve (in North America, 3/8-inch compression
fitting is included)
• Required incoming water pressure:
3 Bar min, 5 Bar max
• Water hardness cannot exceed 50ppm, otherwise
a water softener is needed
Power
• Single-phase: 220-240 v 50/60 hertz, 35 a,
6.3—7.5 kW
• Three-phase: 380-415 v3n, 50/60 hertz, 22 a,
5.8—6.5 kW
• Receptacle: Nema 6-50
Drain
• Open gravity drain located within 4 feet / 1.2 meters
of the machine
• Two (2) drain hoses: 7/8-inch outside diameter,
5/8-inch inside diameter (2.2-centimeter outside
diameter, 1.6-centimeter inside diameter).
• Ensure drain line is always sloping downwards
24.93 in / 63.3 cm
16.68 in / 42.36 cm
17.68 in / 45 cm
13.4 in / 34 cm
MAR 2022
