2. Home
  3. Lighting
  4. Decorative lighting
  5. RAB
  6. Porto
Porto

RAB Porto Operating instructions

  • Hello! I'm your chat assistant and I've reviewed the provided document for the RAB Lighting PORTO and PORTO XL fixtures. This document includes detailed instructions on mounting, wiring, and troubleshooting for both models. I'm ready to answer any questions you have about the installation process, wiring options, or features of the fixtures.
  • Can this fixture be installed in a wet location?
    What is the purpose of the EZ Hang Hook?
    Can fixture be mounted on a pendant?
INSTRUCTIONS
PORTO® and PORTO® XL INSTALLATION
RAB Lighting is committed to creating high-quality, aordable, well-designed and energy-ecient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: [email protected]
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.



WARNING: Make certain power is OFF before installing or maintaining xture. No user serviceable parts inside.
CAUTION: For proper weatherproof function all gaskets must be seated properly and all screws inserted and tightened
rmly. Apply weatherproof silicone sealant around the edge of the ceiling mounting box and/or junction box. This is
especially important with an uneven ceiling surface. Silicone all plugs and unused conduit entries.
PORTO® PORTO® XL
Junction
Box Plugs (4)
Gaskets
Screws (2)
LED
Housing
Screws (2)
Screws (2)
EZ Hang Hook
Gaskets
Fixture
Wires
Screws (2)
Junction
Box
NPS Adaptor





 Screws (2) Junction Box LED Housing.
NPS Adaptor (Fig. 2)

 Junction Box (4) Knock Out
Locations


 EZ Hang Hook 
Fixture Wires.
 Plugs


  Screws (2)
 
Junction Box

NPS Adaptor
 (supplied by others)
 Screws (2)LED Housing.
 Junction Box
NPS Adaptor
EZ Hang Hook
 Ceiling
Mounting
 Screws (2)
INSTRUCTIONS
PORTO® and PORTO® XL INSTALLATION
RAB Lighting is committed to creating high-quality, aordable, well-designed and energy-ecient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: [email protected]
PINK (or GRAY)
LIGHT
FIXTURE
Vaux 12V
YELLOW
GROUND
GROUND
( - ) DIM V
( + ) DIM V
COMMON
LINE BLACK
WHITE
PURPLE

CAUTION: Be sure xture temperature is cool enough to
touch. Do not clean or maintain while xture is energized.



 

 
 
 
 

(/480V) 

  LINE
 COMMON 
 GROUND
4.13”
[104.8 mm]

3.54”
[89.8 mm]
3.54”
[89.8 mm]
5.25”
[133.4 mm]
PORTO- IN - 1221
Easy Answers
rablighting.com
Visit our website for product info
Tech Help Line
Call our experts: 888 722-1000
e-mail
Answered promptly - [email protected]
Free Lighting Layouts
Answered online or by request
© 2022 RAB LIGHTING Inc.
RAB WARRANTY: RAB’s warranty is subject to all terms and conditions found at rablighting.com/warranty PATENT: Patent information can be found at rablighting.com/ip



73131-RAB

(/480V) 


1. LINE 
2. COMMON
3. GROUND
NOT GROUND 

4. 
5. (or gray) 
6. 
Note: These instructions do not cover all details or variations in equipment nor do they
provide for every possible situation during installation, operation or maintenance.
18745 BILEVEL SENSOR FOR D10
Thank you for buying RAB lighting xtures. Our goal is to design the best quality products to get the job done right. We’d like to hear your comments.
Call the Marketing Department at 888-RAB-1000 or email: marketing@rabweb.com
TROUBLESHOOTING ON FACTORY
SETTINGS (WITHOUT REMOTE)
If the sensor does not detect motion as expected:
1. Check xture mounting and compare xture location
and sensor coverage with the coverage diagrams
2. Check that movement is not directly towards sensor
pattern, but across the pattern
• Adjust xture location as necessary
3. Check that far away movement directly towards sensor
is not entirely within one Detection Pattern Finger
(see coverage pattern diagrams on the next page)
• Adjust sensitivity to maximum for best results with far
away movement
CUSTOMIZATION
FSIR-100 remote (RAB CAT#WSREM) is necessary to customize
settings.
For 24 hour operation: Change Setpoint=DIS (disabled)
Adjustment ranges:
• Auto calculates appropriate Setpoint based on
surrounding light: 2 minute warm-up, blinks on/o 8
times, then turns o until motion is detected
• High Mode: 0-10V with 0.2V increments
• Low Mode: 0-9.8V with 0.2V increments
• Time Delay: 30 seconds, 1-30 minutes
• Cut-o: 1-59 minutes, 1-5 hours, DIS (disabled)
• Setpoint: 1-250 fc, AUTO, DIS (disabled)
• Sensitivity: NONE, LOW, MED, MAX
• Ramp-up Time: 1-60 seconds
• Fade-down Time: 1-60 seconds
Sensor Configuration
Loa d Co nfig (PnL)
Daylighting Con fig
Main Menu
Up
Select
Down Right/Next
Left
Back
Power BAT=
FSIR-100 (RAB CAT#WSREM) REMOTE
• Follow screen prompts
• When changing sen-
sor settings, be sure to
select SEND at the
bottom right of the
screen
• Sensor conrms setting
change by blinking on
and running through 1
cycle
Fig. 4
TROUBLESHOOTING WITH REMOTE
*Adjusting sensor with remote (RAB CAT#WSREM) turns on
xture automatically. Once settings are changed, wait for
xture to turn o according to settings, then perform Walk Test.
1. Check current sensor settings by:
• Select FSP-211 on main screen after powerup
• Select Current Settings in menu
• Point remote at sensor, press center button and release
• Be sure that sensor blinks and xture lights, conrming
connection with remote
• Current settings will be shown on remote screen
2. Fixture will not light/sensor does not detect motion:
Using increments of 1 fc, adjust Setpoint to a larger
value until xture lights with motion, and/or raise
Sensitivity
3. Fixture and sensor are too active: Using increments
of 1 fc, adjust Setpoint to a lower value until xture
only lights at desired intervals/motions, and/or lower
Sensitivity
4. Fixture lights at installation and follows expected
pattern, but does not turn on with subsequent detected
motion: See 2 and 3 above to adjust Setpoint or change
Setpoint to Auto
ACCESSORIES
• WSREM remote
• WSLENS-8: 48’ diameter coverage from 8’ height
• WSLENS-20: 40’ diameter coverage from 20’ height
• WSLENS-40: 60’ diameter coverage from 40’ height
• WSLENS-40W: 100’ diameter coverage from 40’ height
OPERATION (NON-DIMMABLE
DRIVER)
• Ambient light above the Setpoint causes sensor to keep
xture light o, despite detected motion
• Light turns on with motion detection
• Light turns o with lack of motion after reaching the
Time Delay period
18745 BILEVEL SENSOR FOR D10
Thank you for buying RAB lighting xtures. Our goal is to design the best quality products to get the job done right. We’d like to hear your comments.
Call the Marketing Department at 888-RAB-1000 or email: marketing@rabweb.com
0'
8'
'7'3 '3'07' 11' '42'1124'
Note: These instructions do not cover all details or variations in equipment nor do they provide for every possible situation during installation operation or maintenance.
Easy Installation & Product Help
Tech Help Line
Call our experts 888 RAB-1000
©2015 RAB LIGHTING Inc.
No
rthvale, New Jersey 07647 USA
rabweb.com
Visit our website for product info
email
Answered promptly sales@rabweb.com
18745 IN 0515
30'
20'
10'
10'
20'
0'
10' 0' 10' 20'
20'
60 ft
SENSOR TOP COVERAGE DIAGRAMS
WSLENS-8
Detection
Pattern
Fingers
SENSOR SIDE COVERAGE DIAGRAMS
WSLENS-8
20’ 10’ 0’ 10’ 20’
0’
20’
10’
10’
20’
40’
0’ 3’ 6’ 12’ 27’ 30’
’6 ’312’27’
30’ 20’ 20’
0’
3’
6’
3’
6’
12’
27’
30’
12’
27’
20’
20’
60’
50' 25' 0' 25' 50'
0'
50'
25'
25'
50'
100'
WSLENS-20
WSLENS-40 WSLENS-40W ’3 ’0 ’3 ’6 ’9’21 ’9 ’6 12’
10’
20’
0’
15’
5’
’02 ’81 ’51 15’ 18’ 2
0
30’
0’
10’
20’
30’
40’
0’ 6’ 12’ 30’’02 ’21 ’6 20’
0'
10' 10'
20' 20'30' 30'40' 40'
0'
27'
40'
50'50'
WSLENS-20
WSLENS-40
WSLENS-40W
DIMMABLE WIRING DIAGRAM
Dimmable
Driver
LINE
NEUTRAL
NEUTRAL
GRAY (-)
VIOLET (+)
LOAD
Occupancy Sensor
5E4
800.879.8585
www.wattstopper.com
1r59151
DAOL
ENIL
TUEN
)teloi
v(
(grey)
18-20 AWG Solid CU Wire Only
230 VAC, 50 Hz
1200W max ballast
FSP-211
DNRG
-MID
DIM+
14-18 AWG Solid CU Wire Only
High/Low PIR
Ground
LED
/