2. OVELA
  3. OVWILLWBSNA
OVWILLWBSNA

OVELA OVWILLWBSNA User guide

  • Hello! I have reviewed the user guide for the William Wood Bed, models OVWILLWBSNA and OVWILLWBSWA. This document provides detailed, step-by-step instructions on assembling the bed, including the necessary components and tools. I am ready to answer any questions you have about setting up your new bed.
  • What tools are needed for assembly?
    Can I use power tools for assembly?
    What type of screws are used?
WILLIAM WOOD BED
SINGLE
OVWILLWBSNA, OVWILLWBSWA
Hardware
A 50mm M6 screw (x16) B 35mm M6 screw (x12) C Dowel (x8)
D 30mm M4 screw (x28) H Allen key (x1)
COMPONENTS
2
3
3
5
2
1
1
5
6
4
4
6
Step 1: Align one part labelled 3 with parts labelled 1 and 2. Using the Allen key (H), secure
the part labelled 3 to parts labelled 1 and 2 with 50mm M6 screws (A).
Repeat this process with the remaining parts labelled 1, 2 and 3. This will create two end
assemblies.
A (x8) H (x1)
ASSEMBLY
Note:
Do not use power tools to assemble this bed as it may damage the components.
3
3
2
A
H
A
1
2
1
x2
Step 2: Align one each of the parts labelled 4 and 5 with one part labelled 6. Using the Allen
key (H), secure the pieces (4, 5, 6) together with 35mm M6 screws (B).
Repeat this process with the remaining parts labelled 4, 5 and 6. This will create two side
assemblies.
B (x12) H (x1)
4
6
5
B
x2
Step 3: Connect the holes on the side assemblies to those on the end assemblies using the
dowels (C).
C (x8)
Step 4: Using the Allen key (H), secure each corner of the side and end assemblies with
50mm M6 screws (A).
A (x8) H (x1)
C
C
C
C
A
A
A
Step 5: Using a Phillips screwdriver (not supplied), secure parts labelled 7 onto the bed with
30mm M4 screws (D).
D (x28)
Assembly complete.
7
D
Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com
/