MOTORCYCLE HELMET & GEAR TIDY
MODEL NO: MS081
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
PLEA
E READ THE
E IN
TRU
TI
N
AREFULLY. N
TE THE
AFE
PERATI
NAL RE
UIREMENT
, WARNIN
AUTI
N
. U
E
T
RRE
TLY AND WITH
ARE F
R THE P
RP
E F
R WHI
H IT I
INTENDED. FAIL
RE T
D
MAY
A
E DAMA
E AND
R
AL IN
RY AND WILL INVALIDATE THE WARRANTY. KEEP TH
IN
AFE
R F
T
RE
.
1. SAFETY
DO NOT locate this tidy in such a position as to create the risk of injury from contact with the head or any other part of the body.
DO NOT overload this tidy; it should only be used for the designed purpose.
DO NOT locate in a position where items could fall from the tidy owing to accidental contact.
Ensure that the tidy is fi rmly fi xed to the wall using suitable wall fi xings.
Ensure that, when installed, it can be accessed without over-reaching or over-balancing.
2. INTRODUCTION
Powder coated steel construction, for added corrosion resistance. Wall mounting unit designed to organize the storage of gloves, clothing and
helmet(s). Shelf capacity of 18kg and hanging rack capacity of 10kg.
3. SPECIFICATION
Width x Depth: ............................................490mm x 350mm
4. INSTALLATION
4.1. Choose a suitable location and, ensuring that the tidy is level, mark the position for the four holes on the wall.
4.2. Select suitable wall fi xings and drill the wall on the marks made previously.
4.3. Use the selected wall fi xings to secure the tidy to the wall.
4.4. Hang the supplementary shelves from the main shelf if required.
5. CARE
5.1. Clean with a soft, damp cloth. DO NOT use abrasive or solvent cleaners.
MS081 Issue 2 (2) 26/05/21
Original Language Version
© Jack Sealey Limited
Refer to
instructions
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
1
Sealey YK509FAH User manual
Sealey MS080.V2 User manual
Sealey WPB050 User manual
Sealey RD2500.V6 User manual