Sealey MS080.V2 User manual

Category
Motorcycle Accessories
Type
User manual

Sealey MS080.V2 is a powder-coated steel construction wall mounting unit for organizing the storage of motorcycle gear. It has a shelf capacity of 33lbs and a hanging rack capacity of 22lbs. It is designed to store gloves, clothing, and helmets. The shelves can be attached to the wall using the four bolts provided. The wall plates should be perpendicular to the shelves. The unit should be firmly fixed to the wall using masonry or hollow wall fixings (not supplied).

Sealey MS080.V2 is a powder-coated steel construction wall mounting unit for organizing the storage of motorcycle gear. It has a shelf capacity of 33lbs and a hanging rack capacity of 22lbs. It is designed to store gloves, clothing, and helmets. The shelves can be attached to the wall using the four bolts provided. The wall plates should be perpendicular to the shelves. The unit should be firmly fixed to the wall using masonry or hollow wall fixings (not supplied).

MOTORCYCLE HELMET & GEAR TIDY
MODEL NO: MS080.V2
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
8 DO NOT locate this tidy in such a position as to create the risk of injury from contact with the head or any other part of the body.
8 DO NOT overload this tidy; it should only be used for the designed purpose.
8 DO NOT locate in a position where items could fall from the tidy owing to accidental contact.
9 Ensure that the tidy is rmly xed to the wall using either the masonry xings supplied or alternative hollow wall xings (not supplied).
9 Ensure that, when installed, it can be accessed without over-reaching or over-balancing.
2. INTRODUCTION
Powder coated steel construction, for added corrosion resistance. Wall mounting unit designed to organize the storage of gloves, clothing and
helmet(s). Shelf capacity of 15kg and hanging rack capacity of 10kg.
3. SPECIFICATION
Width (top shelf) x Depth: ............................240mm x 405mm
Width (bottom shelf) x Depth: ......................240mm x 160mm
4. INSTALLATION & ASSEMBLY
4.1. Attach the wall plates to the two shelves using the four bolts provided. fig .2. Ensure the wall plates are perpendicular to the shelves.
4.2. Hold the assembled shelves in the desired position and mark the wall through the four holes. g.1
4.3. Remove from wall.
4.4. Use proprietary wall xings that are suitable for the type of wall and the weight of the loaded tidy, (not supplied).
4.5. Drill four holes suitable for the proprietary wall xings.
4.5.1. Fix the shelves to the wall.
MS080.V2 Issue 2 (2) 26/05/21
Original Language Version
© Jack Sealey Limited
Refer to
instructions
g.1
MS080.V2 Issue 2 (2) 26/05/21
Original Language Version
© Jack Sealey Limited
g.2
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call our
technical team on technical@sealey.co.uk or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk
  • Page 1 1
  • Page 2 2

Sealey MS080.V2 User manual

Category
Motorcycle Accessories
Type
User manual

Sealey MS080.V2 is a powder-coated steel construction wall mounting unit for organizing the storage of motorcycle gear. It has a shelf capacity of 33lbs and a hanging rack capacity of 22lbs. It is designed to store gloves, clothing, and helmets. The shelves can be attached to the wall using the four bolts provided. The wall plates should be perpendicular to the shelves. The unit should be firmly fixed to the wall using masonry or hollow wall fixings (not supplied).

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI