ADC 3600 User manual

Type
User manual

This manual is also suitable for

w w w . a d c . c o m + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 1 - 8 0 0 - 3 6 6 - 3 8 9 1
Spec Sheet
LoopStar
®
Metro 3600
SONET Multi-Service Transmission Platform
The LoopStar
®
Metro 3600 is an advanced, next-generation SONET multi-service transmission
platform that allows service providers to cost-effectively aggregate, deploy, and manage TDM
and Ethernet services. With its compact design and ability to scale from an OC-3 to an OC-192
network, the Metro 3600 provides a low-cost, high-growth solution for adding services at the
central office or at the edge of the network.
When used with the LoopStar 800, LoopStar 810, or LoopStar 1600 products, the Metro 3600
provides a cost-effective aggregation point for multiple subtending rings. The Metro 3600 also can
function as multiple virtual Add-Drop Multiplexers (ADMs) for hub node applications. In addition,
with its versatile cross-connect architecture and high port count, this platform is an efficient
alternative to existing cross-connect systems that require significantly more rack space at two
to three times the cost.
Benefits:
Aggregates and delivers TDM and Ethernet
services over a single transport platform.
Provides efficient support for point-to-
point, point-to-multipoint, or multipoint-to-
multipoint traffic.
Supports network interfaces from an OC-3
to OC-192 and tributary interfaces from
OC-3 to OC-48.
Scales Ethernet services from sub10BaseT
rates up to Gigabit Ethernet using QoS in
conjunction with EoS features.
Offers modular slot design to grow the
network cost-effectively and add services
when required.
Provides multiple network protection
schemes including UPSR, BLSR, and LAPS.
Prevents tributary card failures from
affecting customer traffic with economical
n:1 tributary card protection.
Protects equipment (cross-connections and
management) with redundant cross-connect
and management cards.
Reduces CAPEX by providing MADM and
3/1 DACS functionality in a single platform.
Provides sufficient traffic grooming
capabilities to reduce the need for costly
DACs ports.
Utilizes the same management systems
as those for the LoopStar 800/810/1600:
LoopStar SONET EMS, LoopStar SONET
Web-based LCT.
1 2 / 0 6 1 0 3 8 7 3 A E
LoopStar
®
Metro 3600
LoopStar
®
Metro 3600
SONET Multi-Service Transmission Platform
2
w w w . a d c . c o m + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 1 - 8 0 0 - 3 6 6 - 3 8 9 1
Features and Benefits
Software selectable network protection offers support for UPSR, BLSR, or Linear 1+1 (LAPS)
EoS (GFP, low order VCAT, and LCAS) allows for more efficient use of SONET bandwidth without affecting
the existing infrastructure
VLAN support with 802.1Q-in-Q allows for transparent transport of customer VLANs, simplifying the
management of customer Ethernet traffic
Supports the following Ethernet business services: EPL, EVPL, EPLAN, EVPLAN
M13 and transmux support enables efficient use of network resources without sacrificing traffic
routing capabilities
High-density support for DS1, DS3, OC-3, OC-12 and OC-48 tributaries provides a cost-effective
aggregation point for access networks and metro networks
Flexible n:1 protection for DSn interfaces promotes further operational cost savings
8 RU design for central office deployments
Low power consumption (350W typical) saves on operation expenses
Cross-connect matrix and management function is provided on one integrated card, reducing both capital
and operational expenses
Most tributary cards are interchangeable with the LoopStar 800/1600, reducing spare inventory
Space-Saving Design
The compact 8 RU (14" x 17.2" x 13.8") LoopStar Metro 3600 allows for ease of installation in tight rack
spaces in central office environments.
Line Card Options:
Two card slots for management, control and cross-connect functionality. One slot for auxiliary alarm unit.
Fourteen service interface slots for network or tributary card use: OC-192, OC-48, OC-12, OC-3, DS3,
DS1, 10/100, 100FX or Gig-E
OC-3 line card options for 1, 2, 4, or 8 ports
OC-12 line card options for 1, 2, or 4 ports
All optical interfaces support UPSR, BLSR, or LAPS configurations
Flexible DS1 and DS3 protection switching schemes, 1:4 for DS1 and 1:3 for DS3 or 1:1 for DS1 and
1:1 for DS3
DS1 line card for 28 ports
DS3 line card options for 6 or 12 ports
Multiple Input/Output back-plane panels for DS1 and DS3 line card options (DS1 only, DS3 only, or
DS1 and DS3 combo)
Ethernet line card options for 8 port 10/100BT, 2 port Gig-E, or a combination of 4 port 10/100 with
1 port Gig-E
BITS and loop timing options for redundancy
1 2 / 0 6 1 0 3 8 7 3 A E
LoopStar
®
Metro 3600
LoopStar
®
Metro 3600
SONET Multi-Service Transmission Platform
3
w w w . a d c . c o m + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 1 - 8 0 0 - 3 6 6 - 3 8 9 1
LoopStar Metro 3600 chassis assembly LPS-FRM3600-L1
3600 groupware for 19"/23"frame installation, fiber management, brackets,
rear cover and door
LPS-3600-OFI
Cross-connect and system control and timing board (35G STSI/5G VT1.5) LPS-GXCS01-L1
Cross-connect and system control and timing board (80G STSI/20G VT1.5) LPS-EXCS01-L1
LoopStar metro 3600 system auxillary board LPS-AUX-L1
OC-192 optical interface unit (IR-2, LC) 40km LPS-OC19202
OC-192 optical interface unit (LS-64.2, LC) 80km, without BA LPS-OC19203
OC-192 optical interface unit (40 wavelength, 100G, G.692) LPS-OC192W
OC-48 optical interface unit LPS-OC480x
OC-48 optical interface unit (SR-1, LC) LPS-OC4804
OC-48 optical interface unit (IR-2, LC) LPS-OC4805
OC-48 optical interface unit (100KM, LC) LPS-OC4806
OC-48 optical interface unit (40 wavelength, 100G, G.692, 170KM) LPS-OC48W01*
OC-48 optical interface unit (40 wavelength, 100G, G.692, 640KM) LPS-OC48W02*
4xOC-12 optical interface unit LPS-OC12Q0x
4xOC-12 optical interface unit configurable LPS-OC12QAz
2xOC-12 optical interface unit LPS-OC12D0x
OC-12 optical interface unit LPS-OC120x
8xOC-3 optical unit LPS-OC30z
4xOC-3 optical interface unit LPS-OC3Q0x
2xOC-3 optical interface unit LPS-OC3D0x
OC-3 optical interface unit LPS-OC30x
2x1000Base-FX ethernet board (transparent, without GE SFP module) LPS-EGT2z
8x100Base-T ethernet board LPS-EFS8
28xDS-1 mapper board LPS-PDT102
28xDS1 mapper protection LPS-PDT1P02
6xDS-3 mapper board (transmux) LPS-PDM3
6 port DS3 transmux/remote test protection unit LPS-PDM3P01
12xDS3/STS1 mapper unit LPS-PQT3A01
12xDS-3 mapper board LPS-PQT302
12xDS3 mapper protection LPS-PQT3P01
12xDS3/STS1 mapper protection unit LPS-PQT3B
Faceplate front (for XCS slot) LPS-XFF
56xDS1 electrical interface board (right side) LPS-PQI1R
56xDS1 electrical interface board (left side) LPS-PQI1L
48xDS3 electrical interface board (BNC left side) LPS-PHI3A
48xDS3 electrical interface board (BNC right side) LPS-PHI3B
48xDS3 electrical interface board (MINI-BNC left side) LPS-PHI13C
48xDS3 electrical interface board (MINI BNC right side) LPS-PHI13D
Faceplate rear for 3600 LPS-BFA
Note: x = 1, 2, 3 (where 1 = 15 km, 2 = 40 km, 3 = 60 km)
z = requires SFPs
*Contact customer service for correct part numbers for SFP and specific wavelengths
O r d e r i n g I n f o r m a t i o n
Web Site: www.adc.com
From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080
Fax: +1-952-917-3237For a listing of ADC’s global sales office locations, please refer to our Web site.
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101
Specifications published here are current as of the date of publication of this document. Because we are continuously
improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may
verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc.
views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features
contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer
103873AE 12/06 Original © 2006 ADC Telecommunications, Inc. All Rights Reserved
Spec Sheet
Specifications
Cross-connect capabilites: 768 x 768, 1920 x 1920 STS-1
2688 x 2688, 10752 x 10752 VT1.5
Interface capacities
TDM: 224 x DS1/Shelf
96/192 x DS3/Shelf
SONET: 56/112 x OC-3/Shelf
32/56 x OC-12/Shelf
6/14 x OC-48/Shelf
2/6 x OC-192/Shelf
Ethernet: 96 x 10/100 Mbps Ethernet/Shelf
24 x Gigabit Ethernet/Shelf
Networking Topologies:
Terminal
Linear ADM
Ring and multi-ring
Mesh
Service Protection:
Linear-APS
UPSR, BLSR (Optional)
DNI (Dual Node Interconnection)
FSVP (Fiber Shared virtual path protection)
Equipment Protection:
1 + 1 protection of cross-connect, system control and timing Dual Power feeds
1: N(N 4) DS1 protection
1: N(N 4) DS3 protection
Network Management:
TL1, Web-based LCT
SNMP
LoopStar Element Management System
IP DCC and 4 layer OSI over DCC
Ethernet Features:
HDLC/X.86/GFP encapsulation
STS-1 & VT1.5 VCAT, LCAS, 802.1Q VLAN/QinQ
L2 switching with STP/RSTP, MPLS VPN
Power Consumption:
600W (maxiumum load configuration)
<350W (typical)
PHYSICAL
Dimension (HxWxD): 8RU (14" x 17.2" x 13.8")
Weight: <124 lbs (55 kg) (full configuration)
Operating Temperature: 23 °F to 131 °F (-5 °C to 55 °C)
Operating Humidity: 5% to 95%
Standards Compliances: NEBS Level 3 Certified
Telcordia GR-253, GR-1089 and GR-63
UL 60950
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

ADC 3600 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI