Cannon MX360 User manual

Type
User manual

This manual is also suitable for

Setting Up Your MX360 or MX410
In Default Mode (Tel Priority Mode)
Without An Answering Machine
Next
Connecting The Phone Lines
NextPrevious
(Existing Phone Cord)
Wall Jack
Hand Set
(Phone)
Fax to Phone Line Connection
NextPrevious
3
Before
After
(Phone Cord included with Canon printer)
Wall Jack
(Existing Phone Cord)
Hand Set
(Phone)
Fax to Phone Line Connection
NextPrevious
4
(Phone Cord included with Canon printer)
Wall Jack
(Existing Phone Cord)
Hand Set
(Phone)
Plug the provided phone cord into the wall jack
Fax to Phone Line Connection
NextPrevious
5
(Phone Cord included with Canon printer)
Wall Jack
(Existing Phone Cord)
Hand Set
(Phone)
Plug the provided phone cord into the “L” jack located on the rear of
the multifunction
Fax to Phone Line Connection
NextPrevious
6
(Phone Cord included with Canon printer)
Wall Jack
(Existing Phone Cord)
Hand Set
(Phone)
Remove the white plug (D) from the upper jack.
Fax to Phone Line Connection
NextPrevious
7
(Phone Cord included with Canon printer)
Wall Jack
(Existing Phone Cord)
Hand Set
(Phone)
Plug the second phone cord into the “telephone” jack located on
the rear of the multifunction
Fax to Phone Line Connection
NextPrevious
8
(Phone Cord included with Canon printer)
Wall Jack
(Existing Phone Cord)
Hand Set
(Phone)
Plug the second phone cord into the phone
Setting Up The Receive Mode
NextPrevious
Step 1
Turn on the MX360 or MX410 by
pressing the ON button.
Step 2
Press the FAX button.
NextPrevious
10
MX360 MX410
Step 4
Use the Left or Right Arrow button to
select “Receive mode set”.
Step 3
Press the Menu button
NextPrevious
11
Step 5
Press the OK button
Step 6
The “Receive mode set” screen will
appear
NextPrevious
12
Step 7
Use the Left or Right arrow button
to select “TEL priority mode”
Step 8
Ensure that “TEL priority mode” is
displayed
NextPrevious
13
Step 9
Press the OK button
Step 10
The “Make advanced settings?”
screen will appear
NextPrevious
14
Step 11
Use the Left or Right arrow button
to select “Yes”
Step 12
Ensure “Yes” is selected
NextPrevious
15
Step 13
Press the OK button
Step 14
The “TEL priority mode screen will
appear
NextPrevious
16
Step 15
Use the Left or Right arrow button
to select “User-friendly RX”
Step 16
Confirm “User-friendly RX” is
selected
NextPrevious
17
Step 17
Press the OK button
Step 18
The “User-friendly RXscreen will
appear
NextPrevious
18
Step 19
Use the Left or Right arrow button
to select “ON”
Step 20
Ensure “ON” is selected
NextPrevious
19
Step 21
Press the OK button
Step 22
The screen will return to the fax
standby screen. Your MX360 or
MX410 is now ready to receive a
fax
NextPrevious
20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21

Cannon MX360 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI