Dorel Home Furnishings C018102 Owner's manual

Brand
Dorel Home Furnishings
Model
C018102
Type
Owner's manual

Dorel Home Furnishings C018102 is a Bentwood Dining Chair in white finish. It is designed for home use and has a weight limit of 200 Lb / 90 Kg. The chair is easy to assemble and comes with all the necessary hardware. It features a sturdy metal frame and a comfortable seat. The chair is also easy to clean and maintain. With its stylish design and durable construction, it is a great addition to any dining room.

Dorel Home Furnishings C018102 is a Bentwood Dining Chair in white finish. It is designed for home use and has a weight limit of 200 Lb / 90 Kg. The chair is easy to assemble and comes with all the necessary hardware. It features a sturdy metal frame and a comfortable seat. The chair is also easy to clean and maintain. With its stylish design and durable construction, it is a great addition to any dining room.

DO NOT RETURN TO THE STORE !
C018102
B34C01810200-197776
Date of Purchase
Bentwood Dining Chair
If parts are missing or damaged, we will gladly ship your
replacement parts free of charge.
Lot Number
Thank you for purchasing from DHP!
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
1
N.C. - 7/7/2016
2014 Dorel Home Products All Rights Reserved
White
Visit www.dhpfurniture.com/eng/support-home
or call Toll-Free 1-800-267-1739
Weight Limit: 200 Lb / 90 Kg
X 2
dHp

2
B34C01810200
1-800-267-1739
Monday - Friday, 9:00 am - 5:00 pm (Eastern Time)
DHP
410E, First Street South, Wright City, MO 63390, USA
Attention: Consumer Service.
cs@dhpfurniture.com
Call our toll free number if you need assistance.
Work in a spacious area and near where the unit will be used, preferably on a
carpet, or use a piece of the cardboard packaging to protect your floor and product.
Recommended # of people needed for assembly: 1 (however it is always better
to have an extra hand). Estimated assembly time is 0.5 hours.
Make sure all parts are included. Most parts are labeled or stamped on the raw
edge.
Read each step carefully. It is very important that each step of the instructions is
performed in the correct order. If these steps are not followed in sequence,
assembly difficulties will occur.
For help with assembly, identifying parts, product information or to order parts,
please contact us:
Warranty Information
DHP warrants this product to be free from defects in material and workmanship and
agrees to remedy any such defect. This warranty covers one year from the date of
original purchase. This is solely limited to the repair or replacement of defective
parts and assembly labor is not included.
This warranty does not apply to any product which has been improperly assembled,
subjected to misuse or abuse or which has been altered or repaired in any way.
Liability for consequential damages is excluded to the extent exclusion is permitted
by law. This warranty gives you specific legal rights and you may also have other
rights which vary from state to state.
To obtain warranty service, purchaser must present original bill of sale. Components
repaired or replaced are warranted through the remainder of the original warranty
period only. The defective components will be repaired or replaced without charge,
subject to the terms and conditions described above.
Visit www.dhpfurniture.com to view the limited warranty valid in the U.S. and
Canada.
This product is designed for home use and not intended for commercial use.
This product contains small components. Please ensure that they are kept away
from small children.
Do not use power tools to assemble your furniture. Power tools may strip or
damage the parts.
You will need a phillips headed screwdriver to assemble this product.
Caution
Contact Us!
Read Before Beginning Assembly
Page is loading ...
4
Parts
B34C01810200
This item is packed in 1 box!
Before you throw the package, please use the
Check Box to identify the parts and ensure that
you have all the parts needed for the assembly.
Replacement Parts, Visit www.dhpfurniture.com/eng/support-home
Leg CapT393370X 4 Leg CapT393370X 4Leg CapT393370X 4
Foot Bar 2
T803490
X 2
A
B
C
Seat
T803500
X 2
Foot Bar 1
T803480
X 2
Hardware Note:
Please do not completely tighten all the hardware,
until the entire assembly is completed, unless
otherwise indicated in the step-by-step
instructions.
Hardware Pack
Hardware Pack #: T3332096-02 X2
B34C01810200
5
1/4" x 1 3/8"
X 4
1/4" x 1/2"
X 4
Leg support
X 4
X 4
X 1
1/4" x 1 5/16"
X 1
1
2
3
4
5
6
8
X 9
4mm
X 1
7
Metal plate
X 1
9
6
B34C01810200
Step 1
Insert LEG SUPPORT 4 into Leg (B),
align with first holes, as shown.
X 2
B
B
4
7
B34C01810200
Step 2
Insert LEG SUPPORT 4 into Leg (C),
align with first holes, as shown.
X 2
C
C
4
AB
8
B34C01810200
Step 3
Attach subassembly from STEP 1 to (A)
with BOLTS 1 & WASHERS 7.
Please respect the direction of the arrow
as shown in detail view and DO NOT
completely tighten the bolts until STEP 6
is completed.
X 4 X 4
B
A
X 2
7
X 2
1
AC
9
B34C01810200
Step 4
Attach subassembly from STEP 2 to (A)
with BOLTS 1 & WASHERS 7.
Please respect the direction of the arrow
as shown in detail view and DO NOT
completely tighten the bolts until STEP 6
is completed.
A
C
X 2
7
X 2
1
10
A
Step 5
Insert SPACER 6 between (A) & (B),
then attach the METAL PLATE 9 to
the Chair with BOLT 2 & WASHER 7.
2
B
X 1
X 1
X 1
7
2
6
9
X 1
B34C01810200
7
6
9
11
Step 6
Fix the metal plate 9 to (B) and (C) with
BOLTS 3 and WASHERS 7.
Please make sure all hardware is properly
tightened.
B
C
9
7
3
X 4
X 4
B34C01810200
12
Step 7
Insert Plastic Caps 5 into each leg as shown.
X 4
B34C01810200
5
13
Helpful Hints
Move your new furniture carefully, with two
people lifting and carrying the unit to its new
location.
Your DHP furniture can be disassembled and
reassembled to move.
To clean, use a soft or slightly damp cloth, then
wipe with a clean, dry cloth. DO NOT USE harsh
chemicals or abrasive cleaners.
Never push, drag or pull your furniture.
WARNINGS:
This unit has been designed to support the maximum
loads shown. Exceeding the load limit could cause unit
sagging, instablility, product collapse and/or serious
injury.
Do not allow children to climb or play on the unit.
Failure to comply could result in severe injury.
Helpful Hints
Weight Limit: 200 Lb / 90 Kg
B34C01810200
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19

Dorel Home Furnishings C018102 Owner's manual

Brand
Dorel Home Furnishings
Model
C018102
Type
Owner's manual

Dorel Home Furnishings C018102 is a Bentwood Dining Chair in white finish. It is designed for home use and has a weight limit of 200 Lb / 90 Kg. The chair is easy to assemble and comes with all the necessary hardware. It features a sturdy metal frame and a comfortable seat. The chair is also easy to clean and maintain. With its stylish design and durable construction, it is a great addition to any dining room.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents