Akai HT995 User manual

Category
Portable speakers
Type
User manual
BEFORE WE BEGIN
Thank you for purchasing the AKAI HT995 BLUETOOTH SOUNDBAR.
This is your assurance of quality, performance and value. Our engineers have included
many useful and convenient features in this product. Please be sure to read this instruction
Manual completely to make sure you are getting the maximum benefit from each feature.
This product was manufactured using the highest quality components and standards of
workmanship. It was tested by inspectors and found to be in perfect working order before it left our
factory.If, after reading this manual, you experience any problems with the operation of this product,
please refer to the instructions for obtaining services at the end of this Manual.For future
reference, record the serial number in the space
provided.
Model No: AKAI HT995
Serial Number:
WARNINGS
CAUTION
RISK SHOCKOF ELECTRIC
DO NOT OPEN
The lightning flash is intended to alert the user to the presence of dangerous voltage
within the product's enclosure, and touching the inner parts may result in a risk of
electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
To reduce the risk of electric shock or fire, do not open the cover. Refer servicing to
qualified service personnel.
Warning
OF ELECTRIC RISK SHOCK
DO NOT OPEN
IMPORTANT!
It is recommended not to leave a mobile phone near the unit in order to avoid
electromagnetic interference in the speakers
This equipment is a Class II or double insulated electrical appliance. It has been
connection to electrical earth.designed in such a way that it does not require a safety
[19]
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions - All the safety and
operating instructions should be read before
this product is operated.
2. Keep these instructions - The safety and
retained foroperating instructions should be
future reference.
3. Heed all warnings - All warnings on
the appliance and in the operating
instructions should be adhered to.
4. Follow all instructions - All operating
and use instructions should be followed.
5. Do not use this apparatus near
water - The appliance should not be used
near water or moisture - for example, in a
wet basement or near a swimming pool
and the like.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
8. Do not install near any heat sources such as
other apparatusradiators, heaters, stoves, or
that produce heat.(including amplifiers)
9. Do not defeat the safety purpose of the
polarized or grounding plug. A polarized plug has
the other.two blades with one wider than
A and a thirdgrounding plug has two blades
blade or the thirdgrounding prong. The wide
your safety. If theprong is provided for
provided fit into your outlet,plug does not
consult an for replacement ofelectrician
the obsolete outlet.
on or pinched, particularly at plugs, convenience
the point where they exitreceptacles and at
from apparatus.the
11. Only use attachments/accessories specified
by the manufacturer.
12. Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart or rack is used, use caution
when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug the apparatus during lightning
storms of time.or when unused for long periods
14. Refer all servicing to qualified personnel.
apparatus hasServicing is required when the
such as powerbeen damaged in any way,
supply damaged, liquid hascord or plug is
been spilled objects have fallen into theor
apparatus, the unit has been exposed to rain or
moisture, does not operate normally, or has
been dropped.
CAUTIONS
- Use of controls or adjustments or performance
those described herein,of procedures other than
may result in hazardous radiation exposure
or unsafe operation.other
- To reduce the risk of fire or electric shock,
do rain or moisture.not expose this apparatus to
be exposed to dripping The apparatus must not
or splashing and objects filled with liquids,
such must not be placed on apparatus.as vases,
- The mains plug/appliance coupler is used as
the disconnect devicedisconnect device, the
must readily operable.remain
- Danger of explosion if battery is incorrectly
replaced.
- Replace only with the same or equivalent
type.
WARNING
1. The battery (battery or batteries or battery
excessive heatpack) must not be exposed to
the like.such as sunshine, fire or
2. Before operating this system, check the
voltage of this system to see if it is identical
to the voltage of your local power supply.
[20]
10. Protect the power cord from being walked
3. The ventilation should not be impeded by
itemscovering the ventilation openings with
such curtains etc.as newspaper, table-cloths,
Make 20 cm of spacesure there is at least
above and at space on eachleast 5cm of
side of the unit.
4. Do not place this unit close to strong magnetic
fields.
5. Do not place the unit on the amplifier or
receiver.
6. Do not place this unit close to damp areas
as of thethe moisture will affect the life
laser head.
7. Should any solid object or liquid fall into the
have it checkedsystem, unplug the system and
before operating it by qualified personnel
any further.
8. Do not attempt to clean the unit with chemical
the finish.solvents as this might damage
Use a damp cloth.clean, dry or slightly
9. When removing the power plug from the wall
the plug, neveroutlet, always pull directly on
yank on the cord.
10. No naked flame sources, such as lighted candles,
should be placed on the apparatus.
11. Changes or modifications to this unit not
responsibleexpressly approved by the party
for user's authority tocompliance will void the
operate the equipment.
• The marking label is pasted on the back or the
underside of the equipment.
DO NOT INGEST BATTERY,
CHEMICAL BURN HAZARD
The remote control supplied with this product
contains a coin/button cell battery.
If the coin/button cell battery is swallowed,
it can cause sever internal burns in just
2 hours and lead to useddeath. Keep new and
batteries away from batterychildren. If the
compartment does not securely, stopclose
using the product and keep it away from
children. If you think batteries might have
been swallowed or placed inside any part
of the body, seek immediate medical attention.
[21]
PREPARATION FOR USE
Unpacking and set up
The Unit
Remote Control
RCA Cable
Screws B x 2
Dowels B x 2
Bracket x 2
Screws A x 4
Instruction Manual
ACCESSORIES FOR WALL MOUNTING
• Carefully remove all the components from the carton and remove all packing materials from
the components.
• Make sure noting is accidentally discarded with the packing materials.
• Unwind the AC power cord on the back of the main unit and extend it to its full length.
• Save the carton and the packing materials, if possible, in the unlikely event that the unit ever
needs material is the onlyto be returned for service. Using the original carton and packing
proper way to protect the unit from shipping damage.
[22]
COAX
PAIR
OPTI
AUDIO/AUX
MUSIC
NORMAL
NEWS
(battery included)
AC Power Cord
SOU NDBAR
1
19
36
53
T995
MAN UEL D’ UT ILISA TION
USE R MANUA L
HAN DLEID ING
BED IENUN GSANL EITUN G
Lire a ttent iveme nt la not ice ava nt d’ut ilise r l’app areil
Befo re oper ating t his pro duct, p lease r ead use r manua l compl etely
Lees d e handl eidin g voord at u deze a ppara at
Lese n Sie die B edien ungsa nleit ung bev or Sie da s Gerät g ebrau chen.
H
PLACEMENT AND WALL MOUNTING
Placement
A - If your TV is placed on a table, you can place the unit on the table directly in front of the TV stand,
centered with the TV screen.
B - If your TV is attached to a wall, you can mount the unit on the wall directly below the TV screen.
Wall Mounting (if using option-B)
Note
Assembly is required. Installation must be carried out by qualifed personnel only. Incorrect
assembly can intend to install thisresult in severe personal injury and property damage (if you
product yourself, you wiring and plumbing that maymust check for installations such as electrical
be buried inside the wall). The supplied wall brackets are only for use on vertical walls constructed
from solid brick, solid concrete, solid wood, and solid wooden battens. It is the installer's
responsibility to verify that the wall will safely support the total load of the Soundbar and wall
brackets. Additional tools (not included) are required for the installation. Do not overtighten
screws. Keep this instruction manual for future reference.
1.Parts
Screws B x 2
Dowels B x 2
Bracket x 2
Screws A x 4
[23]
3. Install screws A.
Unit
600mm
WALL
2. Drill holes, install dowels B x 2, screws B x 2
4. Hang the unit.
Wall
5mm
5mm
[24]
Bracket
Screws Ax4
Main Unit
Front view
Back view
10. COAXIAL socket
3. COAXIAL indicator
6. Power indicator
8. AUDIO IN socket
9. socketOPTICAL
5. OPTICAL indicator
1. AUDIO indicator
2. AUX indicator
4. BT indicator
11. AUX IN (L/R) socket
IDENTIFYING THE PARTS
[25]
1 2
3
4
AUD IO AU X COAX BT OP TI
5
6
AUDIO AUX COAX OPTI BT
8
9
10
OPTICAL COAXIAL L -AUX IN- R AC
AUDIO IN
11
7. USB socket
• Recharge for mobile devices.
5V OUT
7
12
12. AC socket
1.
• Switch the unit between ON and STANDBY modes.
2.
• Increase/ decrease the volume level.
3. MUTE
• Mute or resume the sound.
4.
6. /
8. MUSIC/ NORMAL/ NEWS
• Select a preset sound effect.
VOL+/ VOL-
/ OPTI/ AUDIO / AUX/ COAX
5. PAIR
7.
• Press the corresponding AUDIO SOURCE
• To select previous/ next track in Bluetooth.
• Play/pause in Bluetooth.
REMOTE CONTROL
(Bluetooth, Optical, Audio/ Aux (L/R) or COAXIAL)
according to your desired Audio source.
Press and hold the button to activate the
pairing function in Bluetooth and/ or disconnect
the existing paired Bluetoothdevice.
Remote Control Battery Replacement
1. Replace the remote control battery when it no longer operates the unit, or the range is reduced
2. Use only CR2025 3V lithium battery (supplied)
3. Bear in mind that lighting & other room, conditions, in addition to battery age, can affect the
considerably.
o perating range of an infrared remote control.
4. Battery disposal:
Batteries and rechargeable batteries are prohibited to dispose into household waste.
[26]
COAX
PAIR
OPTI
AUDIO/AUX
MUSIC
NORMAL
NEWS
1
2
3
4
5
6
8
7
Battery Installation / Removal
1. Remove the battery compartment cover.
1
2
CR
2025
COAX
PAIR
OPTI
AUDIO/AUX
MUSIC
NORMAL
NEWS
The remote control sensor on the front unit is sensitive to the remote control’s commands up to a
maximum of 6 metres away and within a maximum of a 60º arc.
Please note that the operating distance may vary depending on the brightness of the room.
Remote Control Operation Range
Precautions Concerning Batteries
1. When the Remote Control is not to be used for a long time (more than a month), remove the battery
from the Remote Control to prevent it from leaking.
2. If the batteries leak, wipe away the leakage inside the battery compartment and replace the
batteries with new ones.
3. Do not use any batteries other than those specified.
4. Do not heat or disassemble batteries.
Never throw them in fire or water.
5. Do not carry or store batteries with other metallic objects. Doing so could cause batteries to short
circuit, leak or explode.
6. Never recharge a battery unless it is confirmed to be a rechargeable type.
[27]
AUDIO AUX COAX OPTI BT
Digital inputs connection
Connecting DVD player/TV outputs to digital inputs from the sound board.
- Remove the protective cap of the OPTICAL socket. Use the optical c to able ( n o t s upplied) connect
the OPTICAL output socket from the DVD player/TV with the input socket from the sound board.
- Use the COAXIAL cable (not supplied) to connect the COAXIAL output socket from the DVD
player/TV with the input socket from the sound board.
DVD player / TV outputs
Connect AC Power
Caution:
- Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed
on the rating label on the back or on the underside of the unit.
- Before connecting the AC power cord, ensure that you have completed all other connections.
- Be sure to unplug the power cord from the outlet when the system is not in use for an extended
period of time.
OPTICAL COAXIAL L-AUX-R
AUDIO IN
If there is no sound output and the OPTICAL indicator lights up, ensure that the audio setting of the
CONNECTIONS
If there is no sound coming out of the sound board and the indicator lights up make sure that the
audio setting of your source player(e.g.DVD player, game player, TV) is set to PCM with COAXIAL input.
Tip
input source(e.g.TV,game console,DVD palyer,TV) is set to PCM with OPTICAL input.
sound board inputs
- Connect the small end of AC socket at the back of unit and insert the plug of AC power cord into standard
AC wall outlet.
[28]
Analogue inputs connection
Connecting DVD player/TV outputs to analogue inputs from the sound board.
from the sound board.
sound board inputs
DVD player / TV outputs
Connecting DVD player/TV outputs to analogue inputs from the sound board.
- Use a to connect the DVD player/TV outputs line-in audio cable (Φ 3.5mm) with the AUDIO (not supplied)
input socket from the sound board-.( o r to connect an external audio device headphone socket to this
sound board inputs
DVD player / TV outputs
- Use the supplied RCA audio cable to connect the DVD player/TV outputs with the AUX(L/R) input socket
AUDIO IN socket on the unit, such as MP3 player, Ipod®, or Iphone®, etc…).
[29]
OPTICALL COAXIAL L-AUX-R
AUDIO IN
OPTICALL COAXIAL L-AUX-R
AUDIO IN
GENERAL OPERATION
STANDBY/ON
When you connect the unit for the first time to the mains socket, it will be in switch ON mode automatically.
- Press the button to switch the main unit in STANDBY mode, the POWER indicator will be red.
- Press the button again to switch the unit back into ON mode, and the POWER indicator will be OFF, and
- Disconnect the mains plug from the mains socket if you want to switch OFF the unit completely.
Select the Play Mode
Press the , OPTI, COAX, AUDIO and AUX button on the remote control to select the desired audio source.
Note:
- If there is no signal, the unit will automatically switch off within 19 minutes to save energy.
Adjust the Volume
- Press the VOL +/– buttons to adjust the volume.
- If you want to turn off the sound, press the MUTE button on the remote control. Press the MUTE
button again or press the VOL+/- button to resume normal listening.
Noted please, if you adjusted volume above 26, then power off and power on again, volume
will restored to factory setting automatically.
Select the Sound Effect
While playing, press the MUSIC (recommended for listening to music or video, NORMAL (no effect)
or NEWS (recommended for listening to News) button on the remote control to select the desired
preset equalizer.
AUX/AUDIO IN/COAXIAL/OPTICAL OPERATION
1. Press the AUX, AUDIO, COAX and OPTI button on the remote control to select the desired source.
2. Operate your audio device directly for playback features.
3. Press the VOL +/– button to adjust the volume to your desired level.
[30]
the source indicator will be ON.
In order to avoid interferences, please de-activate Wi-Fi on your device (Smartphone,
tablet, etc) when playing music using Bluetooth.
BLUETOOTH OPERATION
You can listen to tracks from a media device if it is connected to the unit via Bluetooth.
Pair Bluetooth-enabled Devices.
You need to pair your Bluetooth device with this unit before you connect them for the first time.
Pair Bluetooth-enabled Devices
Note:
- The operational range between this unit and a Bluetooth device is approximately 10 meters (without
any object between the Bluetooth device and the unit).
- Before you connect a Bluetooth device to this unit, ensure that you know the device's capabilities.
- Any obstacle between this unit and the Bluetooth device can reduce the operational range.
- If the signal strength is weak, your Bluetooth device may disconnect, but it will re-enter
automatically into pairing mode.
1. During ON mode, press the button on the remote control to select the Bluetooth mode. If the unit
is not paired to any Bluetooth device, the system enters automatically into pairing mode; or you
need to press and hold the PAIR button to start pairing.
2. Activate the Bluetooth function on your device and select the search mode.
your Bluetooth device.
3. To disconnect the Bluetooth function, switch to another function on the unit or disable the
function from your Bluetooth device.
Tips:
· If there is already an existing connection, press the PAIR button on the remote control to re-activate
the pairing mode. The existing connection will be interrupted.
· The unit will also be disconnected when your device is moved beyond the operational range.
· If you want to reconnect your device to this unit, place it within the operational range.
· If the device is moved beyond the operational range, when it is brought back, please check if the
device is still connected to the unit.
· If the connection is lost, follow the above instructions to pair your device again to this unit.
Listen to Music from Bluetooth Device
- If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you can
listen to the music stored on the device through the player.
- If the device also supports Audio Video Remote Control Profile (AVRCP), you can use the player's
remote control to play music stored on the device.
1. Pair your device with the player.
2. Play music via your device (if it supports A2DP).
3. Use supplied remote control to control play (if it supports AVRCP).
- To pause/resume play, press the button.
- To skip to a track, press the or buttons.
[31]
HT995” will appear on
USB Charging :
You can plug a USB cable(not supplied) into the USB socket to charge the mobile device. Output
voltage and current is 5V/500mA. (note: All devices for USB charging are not guaranteed)
[32]
Important note – ENERGY SAVING mode :
This device is equipped with an energy saving mode: if no signal is given during 19 minutes the device
will switch automatically into standby mode in order to save energy (ERP 2 standard). Please note
that low volume setting in the audio source may be recognized as “no audio signal: this will affect
the capability of signal detection from the device and can also originate an automatic switch into
standby mode. If this happens please reactivate the audio signal transmission or increase the
volume setting on the audio source player (MP3 player, etc.), in order to resume playback. Please
contact the local service center if the problem remains.
TROUBLE SHOOTING
To keep the warranty valid, never try to repair the system by yourself. If you encounter problems
when using this unit, check the following points before requesting service.
No power
• Ensure that the mains cable is connected securely.
• Make sure that the unit is switched on.
The remote control does not function
• Use the remote control near to the unit.
• Point the remote control at the remote control sensor on the unit.
• Replace the batteries in the remote control with new ones.
• Remove any obstacles between the remote control and the unit.
Loud hum or noise is heard
• The plugs and sockets are dirty. Wipe them with a cloth slightly moistened with an appropriate
non-abrasive cleaning solution.
The unit does not respond when pressing any buttons.
• The unit may freeze up during use. Switch off and then switch on the unit again at the mains socket
to reset it.
No sound output
• Make sure that the unit is not muted. Press MUTE or VOL + to resume normal listening.
• Ensure that the audio setting of the input source (e.g. TV, game console, DVD player, etc.) is set to
PCM mode while using Optical connection.
I can't find the Bluetooth name of this unit on my Bluetooth device for
Bluetooth pairing
• Ensure that the unit is switched on.
• Ensure that the Bluetooth function is activated on your Bluetooth device.
• The unit has a Bluetooth function that can receive a signal within 10 metres. Keep a distance within
10 metres both devices.
The unit switches off automatically during playing
• Please increase the volume level on your input source player like DVD player/TV ect.
Interferences in Speakers
• Check that you have not left a mobile phone near the unit.
[33]
x 1pc
x 1pc
Power Supply:
Power Consumption:
Power consumption(standby mode):
Input sensitivity:
Speaker Impedance:
S/N(A Weight):
STANDARD ACCESSORIES
Remote Control
Instruction Manual
Power Output(total):
x 2pcs
Bracket
THD(1kHz, 1W):
Frequency Response:
Dimensions:
Bluetooth version:
Work range:
Transmission frequency:
Protocols:
Dowels B
Screws B
x 2pcs
RCA cable(White&Red)
TECHNICAL SPECIFICATIONS
AC100-240V~50/60Hz
< 0.5 Watt
500mV
4 Ohm
80dB
80W
0.5%
40Hz~20KHz
840x66x62mm
V3.0
approx.10metres
2.402~2.480GHz
A2DP/AVRCP
x 1pc
x 2pcs
IMPORTANT:
Due to continual revision and improvement on our products
design, specifications are subject to change without further notice.
EXCLUSIVE IMPORTER
This product was imported by the Company: DEMSA S.A.S.
For any questions concerning the conformity of the product, thank you to send your request to:
DEMSA S.A.S.
28, Boulevard Zéphirin Camélinat
92230 GENNEVILLIERS
FRANCE
6.5Watt
[34]
Screws A
x 4pcs
USB Socket:
5V Out
AC Power Cord
x 1pc
END OF LIFE DISPOSAL
Warning! This logo set on the product means that the recycling of this apparatus comes
within the framework of the Directive 2002/96/CE of January 27, 2003 concerning the
Waste of Electrical and Electronic Equipment (WEEE).
This symbol means that used electrical and electronic products should not be mixed
with general household waste. There is a separate collection system for these products.
If you want to dispose of this equipment, please do not use the ordinary dust bin!
- The presence of dangerous substances in the electrical and electronic equipments can have
potential consequences on the environment and human health in the cycle of reprocessing
this product.
- Therefore, at the end of its lifetime, this product shall not be disposed with other non-recycled
waste. Used electrical and electronic equipment must be treated separately and in accordance
with legislation that requires proper treatment, recovery and recycling of used electrical
and electronic equipment.
- Local authorities and resellers have set special procedures for the purpose of collecting and
recycling this product (please contact your local authority for further details). You have the
obligation to use the selective waste collection systems put in place by your local authority.
- If your used electrical or electronic equipment has batteries or accumulators, please dispose of
these separately beforehand according to local requirements.
- By disposing of this product correctly you will help ensure that the waste undergoes the necessary
treatment, recovery and recycling and thus prevent potential negative effects on the environment and
human health which could otherwise arise due to inappropriate waste handling.
We company DEMSA SAS hereby states that the unit under reference HT995, complies with the
essential requirements and other relevant provisions of the Council Directive R&TTE 1999/05/CE.
The Declaration of Conformity is available on request at the
website www.akai-france.com (heading: Contact).
This unit complies with European Council Directive 2006 / 95 CE
(Electromagnetic Compatibility & Low Voltage Directives)
[35]
BESCHRIJVING VAN APPARAAT
1. AUDIO Indicator
2. AUX Indicator
3. COAXIAAL Indicator
4. BT (Bluetooth) Indicator
5. OPTISCH Indicator
6. Voedingsindicator
7. USB-aansluiting
[42]
Aanzicht van boven
Achteraanzicht
1 2
3
4
AUD IO AU X COAX BT OP TI
5
6
AUDIO AUX COAX OPTI BT
8
9
10
OPTICAL COAXIAL L -AUX IN- R AC
AUDIO IN
11
5V OUT
7
12
10. COAXIAAL aansluiting
11.AUX IN (L/R) ingang
8. AUDIO IN ingang
• Laad voor mobiele apparaten
12. AC stopcontact
9. OPTISCHE aansluiting
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72

Akai HT995 User manual

Category
Portable speakers
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages