Extech Instruments 392052 User manual

Category
Measuring, testing & control
Type
User manual

This manual is also suitable for

392052-en-US_V1.1 12/14
INSTRUCTION MANUAL
Flat Surface Stem Dial Thermometer
Model 392052
Specifications
Display 2000 count liquid crystal display
Units
o
C/
o
F selectable by push-button
Measurement range -58 to 572
o
F (-50 to 300
o
C)
Resolution 0.1
o
to 199.9
o
, 1
o
> 199.9
o
Accuracy ±1.8
o
F (1
o
C) from –22 to 452
o
F (-30 to 250
o
C) : ±4
o
F
(2
o
C) outside this range
Sensor length 5” (130mm)
Sensor tip diameter 0.57” (14.5mm)
Sensor material Stainless steel
Auto Power Off After one hour of operation
Operating temperature for display 14 to 122
o
F (-10 to 50
o
C) (dial display)
Battery One 1.5V LR44 cell or equivalent (A76/G13) cell
Operation
Battery Installation/Replacement
Using a coin or a screwdriver, turn the battery compartment cover a quarter turn to the left. Remove the
cover and install/replace the battery observing the proper polarity.
Taking Temperature Measurements
1. Press the ON/OFF button to turn the thermometer ON. The digital display will begin to indicate
temperature. If the display does not operate, replace the battery.
2. Press the
o
F/
o
C button to select the desired temperature units.
3. Place the sensor disk flat against the surface to be measured and read the temperature on the
display.
Considerations
For best results, the probe disk should be held flat against the surface and the surface are should
be free of any dirt or substance that will inhibit thermal contact.
The thermometer should not be placed inside any oven or microwave.
Remove the battery from the thermometer if it is not to be used for an extended time period.
392052-en-US_V1.1 12/14
Warranty
FLIRSystems,Inc.warrantsthisExtechInstrumentsbranddevicetobefreeofdefectsinpartsandworkmanshipforoneyearfromdateofshipment(asixmonth
limitedwarrantyappliestosensorsandcables).Ifitshouldbecomenecessarytoreturntheinstrumentforserviceduringorbeyondthewarranty
period,contactthe
CustomerServiceDepartmentforauthorization.Visitthewebsitewww.extech.comforcontactinformation.AReturnAuthorization(RA)numbermustbeissued
beforeanyproductisreturned.Thesenderisresponsibleforshippingcharges,freight,insuranceandproperpackagingtopreventdamageintransit.Thiswarranty
doesnotapplytodefectsresultingfromactionoftheusersuchasmisuse,improperwiring,operationoutsideofspecification,impropermaintenanceorrepair,or
unauthorizedmodification.
FLIRSystems,Inc.specificallydisclaimsanyimpliedwarrantiesormerchantabilityorfitnessforaspecificpurposeandwillnotbeliablefor
anydirect,indirect,incidentalorconsequentialdamages.FLIR’stotalliabilityislimitedtorepairorreplacementoftheproduct.Thewarrantysetforthaboveis
inclusiveandno
otherwarranty,whetherwrittenororal,isexpressedorimplied.
Calibration,Repair,andCustomerCareServices
FLIRSystems,Inc.offersrepairandcalibrationservicesfortheExtechInstrumentsproductswesell.NISTcertificationformost
productsisalsoprovided.CalltheCustomerServiceDepartmentforinformationoncalibrationservicesavailableforthis
product.Annualcalibrationsshouldbeperformedtoverifymeterperformanceandaccuracy.Technicalsupportandgeneral
customerserviceisalsoprovided,refertothecontactinformationprovidedbelow.
Copyright©2014FLIRSystems,Inc.
Allrightsreservedincludingtherightofreproductioninwholeorinpartinanyform
www.extech.com
SupportLines:U.S.(877)4398324;International:+1(603)3247800
TechnicalSupport:Option3;Email:[email protected]
Repair&Returns:Option4;Email:[email protected]
Productspecificationsaresubjecttochangewithoutnotice
Pleasevisitourwebsiteforthemostuptodateinformation
www.extech.com
FLIRCommercialSystems,Inc.,9TownsendWest,Nashua,NH03063USA
ISO9001Certified
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Extech Instruments 392052 User manual

Category
Measuring, testing & control
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI