Hunter 44273 User manual

Owner’s Manual

Models

44273

44279

Form# 44129-01

20120723

English

5-1-1Programmable

Weekdays-Saturday-Sunday

INSTALLATION

5 MINUTE

44129-01 • 07/23/2012

2

At A Glance

Know Your ermostat � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3

Setup

Setting Day and Time ��10

Scheduling

Scheduling Introduction � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 12

Personal Scheduling Charts � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 14

Setting Your Schedule � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 14

Temporary Temperature Change � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 18

Turning Oﬀ Scheduling � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 20

Save Away ��22

Features

Alerts ��24

Menu Options ��28

Additional Features ��32

ermostat Assistance

Troubleshooting and Support � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 33

Technical Support ��35

Warranty

1 Year Guarantee ��36

Table Of Contents

3

Your thermostat has been pre-programmed from the factory with no

programming necessary. We recommend using these pre-programmed settings

for a few days before altering them as they offer maximum energy saving

benets. If you do decide to alter your programs, use the charts on page 13

to write out your scheduled times and temperatures. After you have recorded

your preferences, follow the instructions on page 14 to alter your temperature

settings.

There is no need to program the thermostat at the wall where it is mounted!

Remove the thermostat from the backplate by gripping the sides rmly and

pulling it straight off. This allows you to program the thermostat in comfort.

After you have programmed your thermostat, no other setting changes are

necessary unless you wish to browse through the menu to see how you may

further adjust the independent settings of your thermostat to meet your lifestyle.

The features section starting on page 28 of this manual will describe these

settings. Most settings have been preset for optimal performance.

If you need any assistance with installion or setup of your new

Hunter Thermostat, please call us, our technical support staff is

ready to help!

USA: 1-888-830-1326

Canada: 1-866-268-1936

Hours of operation are from 7:00 am to 7:00 pm Monday - Friday and 8:00

am to 5:00 pm on Saturday, Central Time. You may also contact us over the

Internet at:

www.HunterFan.com

Know Your ermostat

44129-01 • 07/23/2012

4

1. Allows Schedule Setup for altering scheduled programs.

2. Sets the Save Away feature for when you will not be home during a regularly

programmed time.

3. Conrms completion of an action or returns you to the Home screen.

4. Allows access to the advanced features of the thermostat.

5. Moves you forward or backward while setting up features or schedules.

6. Adjusts time and temperature settings as well as moving up or down

menu lists.

7. Indicates whether the system is set to Heat, Cool, or Off.

8. Shows if the fan is set to Auto or On modes.

9. Allows you to switch between Heat, Cool, and Off modes.

10. Allows you to switch between fan Auto and On mode.

Know Your ermostat

5

Save

Away

Schedule

Back

Done/

Home

Menu

8

5

43

2

7

6

5

9

10

Know Your ermostat

44129-01 • 07/23/2012

6

1. Holds 2 “AA” Batteries.

2. HE/HG Switch - allows you to set your furnace to Gas/Oil or Electric, based

on the type of system you have.

3. Allows your thermostat to operate your HVAC system* properly by indicating

the system type that you have.

*Conventional System: Uses a condensing unit for cooling and a

separate furnace system for heating.

*Heat Pump System: Uses the condensing unit for both heating

and cooling.

NOTE: If you are unsure of your system type it may be necessary

to contact our technical support department at 1-888-830-1326, your

HVAC manufacturer, or a local HVAC technician to determine this.

Improper selection of your system type could cause the thermostat to not

operate your system properly.

Know Your ermostat

7

1

3

2

Know Your ermostat

44129-01 • 07/23/2012

8

1. Shows the current day of the week or weekend.

2. Indicates the thermostat is running in schedule mode.

3. Will show when your heat pump or system is reporting a problem to the

thermostat.

4. Indicates the current room temperature.

5. C will display when in Celsius mode. Nothing will display when set to

Fahrenheit.

6. Flashes when the furnace lter should be checked for replacement.

7. On when the current schedule period is running.

8. Indicates the current active schedule period.

9. Low battery warning, replace the batteries in the thermostat.

10. Indicates the fan is running when displayed.

11. Shows the current mode of the fan, Auto or On.

12. Indicates the current time in AM (A) or PM (P).

13. On when the current operating mode, heat or cool, is running.

14. Current operating mode, heat or cool.

15. Indicates the thermostat is running in save away mode.

16. Current Set temperature the thermostat is scheduled to run.

Know Your ermostat

9

70

o

Wed

Auto

Filter

10:05

P

o

72

At Home

Heat to

C

2

1

3

4

5

6

7

8

9

10

11

12

13

14

15

16

Know Your ermostat

44129-01 • 07/23/2012

10

Setting Day and Time

Once you install the batteries, the thermostat will prompt you to set the

current day and time.

1. You will notice that “Mon” will be ashing at the top left of your

screen. Use the or buttons to move to your current day of the

week and press the

2. Use the or button to change between am(A) and pm(P). Choose

3. Next you will select your current hour by using the or buttons.

The

4. Set your minutes using the or and press

Done/

Home

to nish or

Back

if

you need to make a correction to a previous step.

5. When nished, the thermostat will show “Updated!” to conrm your

settings are saved.

6. Your thermostat will next prompt you to set your programming, see

page 14 step 2 if you wish to alter your programs at this time.

11

Setting Day and Time

Done/

Home

Menu

OFFCOOL HEAT AUTO ON

Save

Away

Schedule

Back Next

Mon

12:00

A

Set

1-4

Done/

Home

Menu

OFFCOOL HEAT AUTO ON

Save

Away

Schedule

Back Next

Updated!

5

44129-01 • 07/23/2012

12

• The schedule time can be set in 15 minute increments, and remains the same

for both Heat and Cool programs.

• The scheduled temperature can be set in increments of 1°F (1°C).

• After 15 minutes without a key press, the thermostat will return to the home

display screen and save any changes you have made.

• When setting the schedule time, note the AM / PM indicator.

• At any stage during your scheduling, you can use the

Back

or

to move forward or backwards through the steps.

Done/

Home

will also save any

changes, even if you have not scheduled or altered all settings.

• Arrows beside each schedule mode and beside heat/cool modes will indicate

which is active.

Read the scheduling section thoroughly to ensure you understand your

scheduling options and which will best t with your lifestyle. The following notes

should help you with scheduling:

Scheduling Introduction

This thermostat has been pre-programmed to provide optimal energy savings.

No programming is necessary. We recommend you run these programs for

a few days before adjusting your programming. If it is necessary to change

these settings, use the scheduling table on the next page to record your new

settings. You will also nd the default schedule there as well.

13

Personal Scheduling Charts

Day Away Asleep Home

Monday-Friday

Start Time: 8:00am

End Time: 6:00pm

Heat Temp: 60

O

F (16

O

C)

Cool Temp: 85

O

F (29

O

C)

Start Time: 10:00pm

End Time: 6:00am

Heat Temp: 60

O

F (16

O

C)

Cool Temp: 82

O

F (28

O

C)

Heat Temp: 68

O

F (20

O

C)

Cool Temp: 78

O

F (26

O

C)

Saturday

Start Time: 8:00am

End Time: 4:00pm

Heat Temp: 60

O

F (16

O

C)

Cool Temp: 85

O

F (29

O

C)

Start Time: 10:00pm

End Time: 6:00am

Heat Temp: 60

O

F (16

O

C)

Cool Temp: 82

O

F (28

O

C)

Heat Temp: 68

O

F (20

O

C)

Cool Temp: 78

O

F (26

O

C)

Sunday

Start Time: 8:00am

End Time: 4:00pm

Heat Temp: 60

O

F (16

O

C)

Cool Temp: 85

O

F (29

O

C)

Start Time: 10:00pm

End Time: 6:00am

Heat Temp: 60

O

F (16

O

C)

Cool Temp: 82

O

F (28

O

C)

Heat Temp: 68

O

F (20

O

C)

Cool Temp: 78

O

F (26

O

C)

Default Schedule

Note: Use a pencil so these records may be changed at a later time if necessary.

Day Away Asleep Home

Monday-Friday

Start Time:

End Time:

Heat Temp:

Cool Temp:

Start Time:

End Time:

Heat Temp:

Cool Temp:

Heat Temp:

Cool Temp:

Saturday

Start Time:

End Time:

Heat Temp:

Cool Temp:

Start Time:

End Time:

Heat Temp:

Cool Temp:

Heat Temp:

Cool Temp:

Sunday

Start Time:

End Time:

Heat Temp:

Cool Temp:

Start Time:

End Time:

Heat Temp:

Cool Temp:

Heat Temp:

Cool Temp:

Alternate Schedule

The Home schedule automatically calculates the remaining times from Away and Asleep

and assigns them the Home temperature.

44129-01 • 07/23/2012

14

Setting Your Schedule

1. Press the

Schedule

button to enter Scheduling mode.

2. Use the or buttons to select “On” and then

Scheduling.

Note: If you do not wish to use the scheduling option on your thermostat, refer

to page 20, step 2.

3. Monday thru Friday will be ashing on the screen. To proceed scheduling

your weekdays, press

Sunday, press the or button until the day you want to schedule is

ashing at the top of the screen and press

4. By default, “Away” will be ashing on screen to start your scheduling. Use

the

15

Setting Your Schedule

1

Done/

Home

Menu

OFFCOOL HEAT AUTO ON

Save

Away

Schedule

Back Next

70

o

Wed

Auto

12:05

P

At Home

Heat to

72

Done/

Home

Menu

OFFCOOL HEAT AUTO ON

Save

Away

Schedule

Back Next

On

Off

2

1

Done/

Home

Menu

OFFCOOL HEAT AUTO ON

Save

Away

Schedule

Back Next

Wed

Mon

Tu

Th

Fri

Away

Asleep

At Home

4

Done/

Home

Menu

OFFCOOL HEAT AUTO ON

Save

Away

Schedule

Back Next

WedMon Tu Th Fri

3

Sa

Su

44129-01 • 07/23/2012

16

5. Use the or buttons to adjust the start time on the left of the screen

for the period and press

adjust the end time on the right of the screen for this scheduled period.

Press

6. Set the temperature for your heating cycle as indicated by the ashing

heat to arrow on your screen. Use the and buttons to change the

temperature and press

indicated by the ashing the cool to arrow. Set this temperature with your

or buttons and hit

7. The thermostat will start this process again for “Asleep”. Repeat steps 1-5

to schedule the time and set the temperature for your sleep period. When

nished pressed

8. When setting “At Home”, you will only be asked to set a temperature. The

thermostat calculates your “At Home” time by what remains unscheduled

from your “Away” and “Asleep” periods. Set your “Heat To” temperature

rst and press

Scheduling.

9. If you are scheduling the day periods in order (Weekdays, Saturday, then

Sunday), the screen will ash “Updated!”and take you to the next period.

10. When you have completed all scheduling, press

Done/

Home

to nish.

11. If you skipped a section, or are only programming a weekend day, the

Thermostat will show “Updated!” and return you to the Home screen.

Setting Your Schedule

17

Done/

Home

Menu

OFFCOOL HEAT AUTO ON

Save

Away

Schedule

Back Next

80

o

Wed

Mon

Tu

Th

Fri

8:00

A

4:30

P

Away

Asleep

At Home

Heat to

Cool to

to

6

Done/

Home

Menu

OFFCOOL HEAT AUTO ON

Save

Away

Schedule

Back Next

80

o

Wed

Mon

Tu

Th

Fri

Away

Asleep

At Home

Heat to

Cool to

8

Done/

Home

Menu

OFFCOOL HEAT AUTO ON

Save

Away

Schedule

Back Next

Wed

Mon

Tu

Th

Fri

8:00

A

4:30

P

Away

Asleep

At Home

to

7

Done/

Home

Menu

OFFCOOL HEAT AUTO ON

Save

Away

Schedule

Back Next

Wed

Mon

Tu

Th

Fri

8:00

A

4:30

P

Away

Asleep

At Home

to

5

Setting Your Schedule

Next Next

44129-01 • 07/23/2012

18

Temporary Temperature Change

With Temporary Temperature Change you have the ability to alter the

temperature for only the current running schedule.

1. Press the or button once to activate the screen, the backlight

will come on.

2. Use the or buttons again to select a new temperature.

3. Press the

Done/

Home

button to save changes.

Note: Temporary Temperature Change is not a permanent setting.

Your thermostat will only run the new temperature until

the next scheduled period change. After your thermostat

changes to a new schedule set, your thermostat will forget the

temporary setting and resume your existing schedule.

19

Temporary Schedule Change

Done/

Home

Menu

OFFCOOL HEAT AUTO ON

Save

Away

Schedule

Back Next

80

o

Tu

10:05

A

o

72

At Home

Heat to

1

Done/

Home

Menu

OFFCOOL HEAT AUTO ON

Save

Away

Schedule

Back Next

80

o

Tu

10:05

A

o

72

At Home

Heat to

2

Done/

Home

Menu

OFFCOOL HEAT AUTO ON

Save

Away

Schedule

Back Next

80

o

Tu

10:05

A

o

72

At Home

Heat to

3

Done/

Home

44129-01 • 07/23/2012

20

Turning Oﬀ Scheduling

To turn off your schedule and have the thermostat permanently set to

one temperature:

1. Press the

Schedule

button once.

2. Use the or button to switch to Off and select

Done/

Home

.

3. The screen will show “Updated!” and return you to the home screen.

Note: You will notice the black bar on the screen beside the Schedule

button is not displayed anymore. This indicates, no schedule is

set to run. You can see the difference between gure 1 and 4.

4. From the home screen, use the or buttons to adjust your

temperature.

The system will now ignore all schedules and run at the temperature set

by you on the home screen.

If at anytime you wish to change the temperature, just use the or

buttons.

If you wish to reactivate your schedules, refer back to “Setting Your

Schedule” on page 14.

Page is loading ...

Hunter 44273 User manual

This manual is also suitable for

Hunter 44273 User manual

Related papers

Other documents