American Standard A117.1 User manual
- Category
- Sanitary ware
- Type
- User manual
GREEN TEA™
TWO-HANDLE WIDESPREAD LAVATORY FAUCET
WITH PULL-OUT SPOUT
GENERAL DESCRIPTION:
Cast brass valve bodies with flexible hose connections for 6"
to 12" (152mm to 305mm) installations. 1/4 turn washerless
ceramic disc valve cartridges. Metal spout body with brass
pull-out spout (can be locked to spout base if desired). Hose is
1250mm (4') long with 625mm (2') reach. Two integral check
valves. One-half inch male inlet shanks with brass coupling
nuts. 20" (500mm) long flexible stainless steel drain cable is
pre-assembled to faucet body. Metal Speed Connect
®
drain
body with 1-1/4 inch (32mm) tail piece. 1.5 gpm/5.7L/min.
maximum flow rate.
PRODUCT FEATURES:
Ceramic Disc Valve Cartridges: Assures a lifetime of
drip-free performance.
Cast Brass Valve Bodies: Durable. Ideal for prolonged
contact with water.
Low Lead: Meets NSF Standard 61/Section 9 & Prop 65
lead requirements.
Integral Check Valves:
Prevent backflow.
Exclusive Speed Connect Metal Drain:
• Fewer Parts - installs in less time.
• No adjustments required - seals the first time, every time.
• Flexible stainless steel cable - installs effortlessly in
tight spaces.
Choice of Finishes: Available in Polished Chrome or
Stainless Steel (PVD).
MODEL NUMBER:
7010.801 Widespread Lavatory
with Pull-Out Spout
Metal Speed Connect
®
Pop-up drain.
Metal Lever handles.
SUGGESTED SPECIFICATION:
Two handle widespread lavatory faucet shall feature a pull-out spout with two check valves and cast brass valve bodies with
flexible hose connections for 6" to 12" installations. Shall also feature 1/4 turn washerless ceramic disc valve cartridges. Shall
also feature a metal drain body with stainless steel cable actuation. Fitting shall be American Standard Model #7010.801.___.
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
CSA B 125
NSF 61/Section 9
Product
Number
Description
7010.801
Lavatory faucet with Metal Speed Connect
®
Pop-up drain. Metal Lever handles.
Meets the American Disabilities Act Guidelines and ANSI A117.1
Requirements for the physically challenged.
Finish Options
PVD
Stainless
Steel
075
Polished
Chrome
002
152mm to 305mm
(6" to 12") FLEXIBLE
28mm
(1-1/8)
DIA.
35mm
(1-3/8)DIA.
MOUNTING
HOLES (3)
89mm
(3-1/2)
32mm
(1-1/4)
MAX.
DECK
THICKNESS
FOR GROUND
JOINT OR 1/2"
O.D. SLIP
CONNECTION
FLEXIBLE
HOSE
FLEXIBLE
HOSE
MOUNTING
SURFACE
44mm
(1-3/4)
44mm
(1-3/4)
52mm
(2-1/16)
182mm
(7-3/16)
PULL-OUT
SPOUT FEATURE
32mm (1-1/4)
MAX. DECK
THICKNESS
88mm
(3-7/16)
125mm
(4-15/16)
91mm
(3-9/16)
32mm OD
(1-1/4 OD)
128mm
(5-1/16)
FLOW RATE*
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
10080604020
C31
© 2008 AS America Inc.
C32
© 2008 AS America Inc.
GREEN TEA™
TWO-HANDLE WIDESPREAD LAVATORY FAUCET
WITH PULL-OUT SPOUT
GENERAL DESCRIPTION:
Cast brass valve bodies with flexible hose connections for 6"
to 12" (152mm to 305mm) installations. 1/4 turn washerless
ceramic disc valve cartridges. Metal spout body with brass
pull-out spout (can be locked to spout base if desired). Hose is
1250mm (4') long with 625mm (2') reach. Two integral check
valves. One-half inch male inlet shanks with brass coupling
nuts. 20" (500mm) long flexible stainless steel drain cable is
pre-assembled to faucet body. Metal Speed Connect
®
drain
body with 1-1/4 inch (32mm) tail piece. 1.5 gpm/5.7L/min.
maximum flow rate.
PRODUCT FEATURES:
Ceramic Disc Valve Cartridges: Assures a lifetime of
drip-free performance.
Cast Brass Valve Bodies: Durable. Ideal for prolonged
contact with water.
Low Lead: Meets NSF Standard 61/Section 9 & Prop 65
lead requirements.
Integral Check Valves:
Prevent backflow.
Exclusive Speed Connect Metal Drain:
• Fewer Parts - installs in less time.
• No adjustments required - seals the first time, every time.
• Flexible stainless steel cable - installs effortlessly in
tight spaces.
Choice of Finishes: Available in Polished Chrome or
Stainless Steel (PVD).
MODEL NUMBER:
7010.801 Widespread Lavatory
with Pull-Out Spout
Metal Speed Connect
®
Pop-up drain.
Metal Lever handles.
SUGGESTED SPECIFICATION:
Two handle widespread lavatory faucet shall feature a pull-out spout with two check valves and cast brass valve bodies with
flexible hose connections for 6" to 12" installations. Shall also feature 1/4 turn washerless ceramic disc valve cartridges. Shall
also feature a metal drain body with stainless steel cable actuation. Fitting shall be American Standard Model #7010.801.___.
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
CSA B 125
NSF 61/Section 9
Product
Number
Description
7010.801
Lavatory faucet with Metal Speed Connect
®
Pop-up drain. Metal Lever handles.
Meets the American Disabilities Act Guidelines and ANSI A117.1
Requirements for the physically challenged.
Finish Options
PVD
Stainless
Steel
075
Polished
Chrome
002
152mm to 305mm
(6" to 12") FLEXIBLE
28mm
(1-1/8)
DIA.
35mm
(1-3/8)DIA.
MOUNTING
HOLES (3)
89mm
(3-1/2)
32mm
(1-1/4)
MAX.
DECK
THICKNESS
FOR GROUND
JOINT OR 1/2"
O.D. SLIP
CONNECTION
FLEXIBLE
HOSE
FLEXIBLE
HOSE
MOUNTING
SURFACE
44mm
(1-3/4)
44mm
(1-3/4)
52mm
(2-1/16)
182mm
(7-3/16)
PULL-OUT
SPOUT FEATURE
32mm (1-1/4)
MAX. DECK
THICKNESS
88mm
(3-7/16)
125mm
(4-15/16)
91mm
(3-9/16)
32mm OD
(1-1/4 OD)
128mm
(5-1/16)
FLOW RATE*
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
10080604020
-
1
-
2
American Standard A117.1 User manual
- Category
- Sanitary ware
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
American Standard Heritage 7831.000 User manual
-
-
-
-
-
-
-
-
-