1.5 gpm/5.7L/min. maximum flow rate.
GENERAL DESCRIPTION:
Cast brass valve bodies with flexible hose connections for 6"
to 12" (152mm to 305mm) installations. 1/4 turn washerless
ceramic disc valve cartridges. Brass spout. One-half inch
male inlet shanks with brass coupling nuts. 20 inch (500mm)
long flexible stainless steel drain cable is pre-assembled to
spout. Metal Speed Connect
®
drain body with 1-1/4 inch
(32mm) tail piece. 1.5 gpm/5.7L/min. maximum flow rate.
Choice of “Euro” style (2506.801) version or individual base
escutcheons (2506.821).
PRODUCT FEATURES:
Brass Construction: Durable. Ideal for prolonged contact
with water. Provides the finest surface for application of colors
and finishes.
Ceramic Disc Valve Cartridges: Assures a lifetime of
drip-free performance.
Low Lead: Meets NSF Standard 61/Section 9 & Prop 65 lead
requirements.
Exclusive Speed Connect Metal Drain:
• Fewer parts. Installs in less time.
• No adjustments required - seals the first time, every time.
• Flexible stainless steel cable - installs effortlessly in tight spaces.
Choice of Finishes: Available in Polished Chrome or
Stainless Steel (PVD).
MODEL NUMBER:
2506.801 Widespread Lavatory
Metal Speed Connect
®
Pop-up drain.
Metal Lever handles. “Euro” brass deck plate.
2506.821 Widespread Lavatory
Metal Speed Connect Pop-up drain.
Metal Lever handles. Individual base escutcheon.
2506.801
2506.801
2506.821
2506.821
SUGGESTED SPECIFICATION:
Two handle widespread lavatory faucet shall feature cast brass valve bodies with flexible hose connections for 6" to 12"
installations. Shall also feature 1/4 turn washerless ceramic disc valve cartridges. Shall also feature a metal drain body with
stainless steel cable actuation. Fitting shall be American Standard Model #2506.___.___.
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
CSA B 125
NSF 61/Section 9
Product
Number
Description
2506.801
Lavatory faucet with Metal Speed Connect
®
Pop-up drain. Metal Lever handles.
“Euro” style deck plate.
2506.821
Same as ABOVE with individual base escutcheons.
Finish Options
Polished
Chrome
002
075
Stainless
Steel
(PVD)
Meets the American Disabilities Act Guidelines and
ANSI A117.1 Requirements for the physically
challenged.
8"
(203.2mm)
MOUNTING
SURFACE
5-5/16"
(134.5mm)
6-1/16"
(153mm)
6-5/16"
(160.7mm)
1-3/8"
(35mm)
1-3/16" MAX.
(30mm) MAX.
3"
(76mm)
(H)
(C)
1-1/8" D.
(29mm)
1/2-14 MALE
N.P.S.M INLETS
140mm
(5-1/2")
32mm OD
(1-1/4" OD)
2-1/8" D.
(54mm)
6-1/2" to 12"
(165mm to 305mm)
1-3/8"
(35mm)
1-3/16" MAX.
(30mm) MAX.
3"
(76mm)
(H)
(C)
1-1/8" D.
(29mm)
2-5/16" D.
(59mm)
1/2-14 MALE
N.P.S.M INLETS
FLOW RATE*
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
10080604020