Magnavox 17MD250V-17B User manual

Brand: Magnavox

Model: 17MD250V-17B

Category: DVD players

Type: User manual

This manual is also suitable for

17MD250V

Important Information

Important Safety Precautions

Supplied Accessories

Preparation

●

Inserting batteries into the remote control

●

Using the remote control unit

●

Cautions regarding remote control unit

Functional Overview

●

Front view

●

Rear view

●

Remote control

Connections

●

Power connection

●

Antenna connection

●

Connecting external equipment

Basic Operations

●

Turning on the power

●

Turning off the power

●

TV/AV mode selection

Watching TV

●

Turning on the power

●

Turning off the power

●

Simple button operations for changing channels

●

Using last on the remote unit

●

Simple button operation for changing volume/sound

Menu Adjustment

●

TV tuner adjustment

●

Content blocking

●

Picture adjustment

●

Audio adjustment

●

Window adjustment

●

Options adjustment

Troubleshooting

Specifications

2-3

6-9

8-9

10-11

13-15

16-24

16-17

20-21

22-24

Table of Contents (For TV Tuner)

Basic Operations

●

Play discs

●

Pause

●

OSD

●

Volume control

●

DVD menu play

●

Select with number buttons

Play Discs In Various Ways

●

Audio mode

●

Mute

●

Fast play

●

Slow play

●

Repeat play

●

Zoom play

●

Select subtitles

●

Angles select

●

Program play

●

Shuffle (random) play

Menu Setting

●

General setup

●

Audio setup

●

Video setup

●

Password setup

●

Preferences

MP3 Operations

Kodak Picture CD Playback

Troubleshooting

Technical Specifications

Warranty Page

28-32

28-31

32-38

32-33

34-35

36-37

38-42

39-40

40-41

Table of Contents (For DVD Player)

The lightning flash with arrowhead symbol, within an equilateral triangle,

is intended to alert the user to the presence of uninsulated ''dangerous

voltage'' within the product's enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to persons.

The exclamation point within a triangle is intended to alert the user to the

presence of important operation and maintenance (servicing) instructions

in the literature accompanying the product.

This equipment has been tested and found to comply with the limit for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a

particular installation.

If this equipment does not cause harmful interference to radio or television reception which

can be determined by turning the equipment off and on, the user is encourage to try to

correct the interference by one or more of the following measure.

●

Reorient or relocate the receiving antenna.

●

Increase the separation between the equipment and receiver.

●

Correct the equipment into an outlet on a circuit different from that to which the receiver

is connected.

●

Consult the dealer or an experienced radio, TV technical for help.

●

Only shielded interface cable should be used.

Fcc Rf Interference Statement

NOTE:

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

WARNING: To reduce the risk of fire or electric shock, do not expose this Product to

rain or moisture.

Important Information

page1

The present set has been designed and manufactured to assure personal safety. Improper use

can result in electric shock or fire hazard. The safeguards incorporated in the present unit will

protect you if you observe the following procedures in installing, using and servicing. The present

unit is fully transistorized and does not contain any element that can be repaired by the user.

1. Read these instructions - All operating instructions must be read and understood before the

product is operated.

2. Keep these instructions - These safely and operating instructions must be kept in a safe place

for future reference.

3. Heed all warnings - All warnings on the product and in the instructions must be observed closely.

4. Follow instructions - All operating instructions must be followed.

5. Attachment - Do not use attachments not recommended by the manufacturer. Use of inadequate

attachments can result in accidents.

6. Power source - This product must operate on a power source specified on the model label. If

you are not sure of the type of power supply used in your home, consult your dealer or local

power company.

7. AC cord protection - The AC cords must be routed properly to prevent people from stepping on

them or objects from resting on them. Check the cords at the plugs and product.

8. Overloading - Do not overload AC outlets or extension cords. Overloading can cause fire or

electric shock.

9. Entering of objects and liquids - Never insert an object into the product through vents or

openings. High voltage flows in the product, and inserting an object can cause electric shock

and/or short internal parts. For the same reason, do not spill water or liquid on the product.

10. Servicing - Do not attempt to service the product yourself. Removing covers can expose you

to high voltage and other dangerous conditions. Request a qualified service person to

perform servicing.

11. Repair - If any of the following conditions occurs, unplug the AC cord from the AC outlet, and

request a qualified service person to perform repairs.

a) When the AC cord or plug is damaged.

b) When a liquid was spilled on the product or when objects have fallen into the product.

c) When the product has been exposed to rain or water.

d) When the product does not operate properly as described in the operating instructions. Do

not touch the controls other than those described in the operating instructions. Improper

adjustment of controls not described in the instructions can cause damage, which often

requires extensive adjustment work by a qualified technician.

e) When the product has been dropped or damaged.

Important Safety Precautions

page2

f) When the product displays an abnormal condition. Any noticeable abnormality in the product

indicates that the product needs servicing.

12. Replacement parts - In case the product needs replacement parts, make sure that the service

person uses replacement parts specified by the manufacturer, or those with the same

characteristics and performance as the original parts. Use of unauthorized parts can result in

fire, electric shock and/or other danger.

13. Safety checks - Upon completion of service or repair work, request the service technician to

perform safety checks to ensure that the product is in proper operating condition.

14. Wall or ceiling mounting - When mounting the product on a wall or ceiling, be sure to install

the product according to the method recommended by the manufacturer.

15. Unplug the AC cord from the AC outlet before installing the speakers.

16. Cleaning - Unplug the AC cord from the AC outlet before cleaning the product. Use only with

a dry cloth to clean this apparatus. Do not use liquid or aerosol cleaners.

17. Water and moisture - Do not use this product near water such as bathtub, washbasin, kitchen

sink and laundry tub, swimming pool and in a wet basement. TV set shall not be exposed to

dripping or slashing and no objects filled with liquid, such as vases, shall be placed on the TV

set.

18. Stand - Do not place the product on an unstable cart, stand, tripod or table. Unstable installation

is likely to make the product fall resulting in serious injuries as well as material damage. Use

only the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the

apparatus.

19. When a cart is used, use caution when moving the cart/apparatus combination to void injury

from tip-over.

20. Ventilation - The vents and other openings in the cabinet are designed for ventilation. Do not

cover or block them since insufficient ventilation can overheat and/or shorten the product’s

life span. Do not place the product on the bed, sofa, rug or other similar surfaces since they

can block ventilation openings. This product is not designed for built-in installation; do not

place the product in an enclosed place such as a bookcase or rack unless proper ventilation

is provided or the manufacturer's instructions are followed.

21. The LCD panel used in this product is made of glass. Therefore, it can be broken when the

product is dropped or gets shock. Be careful not to be injured by glass pieces in case the

panel is broken.

22. Heat sources - Do not install near any heat sources such as radiators, heat registers, stoves,

or other apparatus (including amplifiers) that produce heat.

23. The LCD panel is a product of very high technology with 2,949,120 thin film transistors, giving

you fine picture details. Occasionally, a few non-active pixels may appear on the screen as a

fixed blue, green or red point. Please note that this does not affect your product's performance.

Important Safety Precautions

page3

Make sure the following accessories are provided with the product.

Supplied Accessories

page4

17MD250V

Power adapter AV cablesRF commutating cable

User guide

Remote control

Insert supplied batteries via the battery compartment on the back of the remote control.

Make sure polarity matches the (+) and (-) marks inside the compartment.

Preparation

page5

Inserting Batteries Into The Remote Control

●

Do not expose remote to liquids, direct sunlight or shock.

●

The remote control unit may not work properly if the remote sensor window of the Display is

under direct sunlight or strong lighting. In such case, change the angle of the lighting or Display,

or operate the remote control unit closer to the remote sensor window.

Cautions Regarding Remote Control Unit

●

Use the remote control by pointing it towards the remote

sensor on the TV. Objects between the remote control and

the sensor may disrupt operation.

●

Effective range is 20 feet but is dependant on what your

viewing angle is.

●

Range can also be affected by direct sunlight on the TV's

sensor.

Using The Remote Control Unit

1) POWER BUTTON: Use to turn the unit on and off.

2) REMOTE SENSOR

3) SOURCE BUTTON: Use to select the AV signal source between: DVD, Analog RGB (PC input),

Composite Video, S-Video, TV, Component Video, and use the OK button to confirm.

4) EJECT BUTTON: Use to eject the disc being played in the disc slot, the main unit must be set

to DVD status.

5) PLAY BUTTON: Use to begin the DVD playback.

6) LCD MENU: Use to bring up the LCD adjustment menu; use the cursor buttons to select an

item and use the left or right button to adjust it.

7) PREV/NEXT (CH+/-): To skip to the previous/next chapter (previous/next channel).

8) DISC SLOT: Insert a DVD or CD disc to play under DVD status.

9) VOLUME+/-: Use to adjust the volume.

Installing your LCD TV

page6

Front View Product Description

1) ANTENNA IN

2) AV1 IN (Composite Video and Audio In)

3) AV2 IN (S-Video and Audio In)

4) AV OUT (Composite Video and Audio Out)

5) HEADPHONES

6) AV3 IN (Component Video and Audio In)

7) VGA (PC Input)

8) DC IN

Installing your LCD TV

page7

Rear View

HEADPHONES

TV Control

page8

Using Your Remote Control

Remote Control Diagram

Use to turn the unit on and off.

POWER1

Use to set the channel and to enter DVD chapter numbers.

Number Buttons2

Use to select close caption mode.

CAPTION3

Use to adjust the volume.

VOLUME+/-4

Press to return to the previous channel in normal viewing mode.

LAST5

Use to bring up the AV signal source selection screen and use the /

buttons to select between: TV, DVD,AUX-Video, AUX-S-Video, AUX-

Component,PC, and press the OK button to confirm.

TV/DVD/AUX/PC6

Use to navigate in menus.

Cursor Buttons7

TV Control

page9

Using Your Remote Control (Continued)

Use to confirm your selections.

OK8

Use to bring up the DVD title menu.

DVD TITLE9

Use to begin the DVD playback.

PLAY10

Use to pause the DVD playback.

PAUSE11

Use to skip to the previous/next chapter.

PREV/NEXT12

Use to zoom the DVD playback picture.

Use to slow the DVD playback speed.

ZOOM

SLOW

Use to shift DVD play mode.

P. MODE15

Use to display the time of the DVD playback.

REMAIN16

Use to shift the DVD playback audio mode.

A. MODE17

Use to shift DVD audio language.

AUDIO18

Use to shift DVD subtitle language.

SUBTITLE19

Use to shift DVD viewing angle.

ANGLE20

Use to repeat the DVD playback.

REPEAT21

In DVD mode, use to set TV display mode.

WIDE22

Use to bring up DVD setup menu.

SETUP23

Return to the previous menu screen.

RETURN24

Use to play DVD fast forward/backward.

FF/FR25

Use to stop the DVD playback.

STOP26

Use to bring up the DVD root menu.

DVD MENU27

Use to bring up TV menu; and exits TV menu by pressing again.

TV MENU28

Use to skip to the previous/next channel.

CH+/-29

Mute the sound.

MUTE30

Auto adjustment for PC signals. In DVD status, use to shift among DVD,

USB and CARD.

AUTO/USB/CARD

Use to eject the disc being played in the disc slot, the main unit must be

set to DVD status.

OPEN( )

Use to bring up the DVD On-Screen-Display.

OSD

Use to select MPX mode.MPX34

Plug the power cable into the power socket with AC100V~240V, 50/60Hz.

Using the supplied antenna cable, connect the antenna terminal to the antenna input terminal on

TV set. May also be connected to cable and satellite box antenna output.

Connections

page10

Power Connection

Antenna Connection

HEADPHONES

You can enjoy picture and sound by connecting VCR, DVD player and PC to the terminals located

on the back of TV set.

Before connecting an external device, turn the TV set off to avoid any possible damage.

1. Connect a PC computer to the LCD through the VGA socket, press the TV/DVD/AUX/PC

button on the remote to bring up Source selection screen, use the / buttons to select "PC"

and press the OK button to confirm.

2. Connect AV equipment to the LCD through the AV1 IN jacks (Composite Video and Audio In

jacks), press the TV/DVD/AUX/PC button on the remote to bring up Source selection screen,

use the / buttons to select "AUX-Video" and press the OK button to confirm.

3. Connect AV equipment to the LCD through the AV2 IN jacks (S-Video and Audio In jacks), press

the TV/DVD/AUX/PC button on the remote to bring up Source selection screen, use the /

buttons to select "AUX-S-Video" and press the OK button to confirm.

4. Connect AV equipment to the LCD through the AV3 IN jacks (Component Video and Audio In

jacks), press the TV/DVD/AUX/PC button on the remote to bring up Source selection screen,

use the / buttons to select "AUX-Component" and press the OK button to confirm.

Connections

page11

Connecting External Equipment

HEADPHONES

1. Press POWER button on the front panel to turn on the TV set. The STANDBY/ON indicator

lights up green.

2. If the STANDBY/ON indicator still lights up red, press POWER on the remote control to turn

the TV set on.

Basic Operations

page12

Turning On The Power

1. Press POWER on the remote control, the image on the screen disappears and the

STANDBY/ON indicator changes from green to red.

2. Press the POWER button on the front panel to turn the TV set off.

NOTE: Small amounts of electric power is still consumed even when the power is turned off.

Turning Off The Power

By pressing the TV/DVD/AUX/PC on the TV set and confirming by the OK button, you can

change the mode as follows:

TV/AV Mode Selection

POWER

TV/DVD/

AUX/PC

SOURCE

TV Video S-Video DVD Component PC

1. Press POWER button on the front panel to turn on the TV set. The STANDBY/ON indicator

lights up green.

2. If the STANDBY/ON indicator still lights up red, press POWER on the remote control to turn

the TV set on.

Watching TV

page13

Turning On The Power

1. Press POWER on the remote control, the image on the screen disappears and the

STANDBY/ON indicator changes from green to red.

2. Press the POWER button on the front panel to turn the TV set off.

NOTE: Weak electric power is still consumed even when the power is turned off.

Turning Off The Power

1. Press CH+ to increase channel number.

2. Press CH- to decrease channel number.

NOTE: CH+/- on the TV set operates the same as CH+/- on the remote unit.

CH+/-

You can change channels in several ways.

Using CH+/- on the remote unit

Simple Button Operations For Changing Channels

CH+/-

Using number buttons on the remote unit

Watching TV

page14

Press LAST to switch the currently tuned channel to the previous tuned channel.

Press LAST again to switch back to the currently tuned channel.

Select the channels directly by pressing the number buttons.

EXAMPLE:

To select a 1-digit channel (e.g. channel 2):

●

Press 2 .

To select a 2-digit channel (e.g. channel 12):

●

Press 1 ,followed by 2 .

Using Last On The Remote Unit

NUMBER BUTTONS

LAST

Changing the volume

You can change the volume on the front panel or on the remote control unit.

Using MUTE on the remote control

Press MUTE to mute the current sound output.

Watching TV

page15

1. Press MUTE . '' '' will display on the screen.

2. Press MUTE again to cancel the mute.

1. Press VOL+ to increase the volume.

2. Press VOL- to decrease the volume.

Simple Button Operation For Changing Volume/Sound

VOLUME+/-

MUTE

Press TV MENU to bring up the TV menu screen.

Press / to select "Settings" and press to enter into the items below ''Settings''.

NOTE: Only when in TV status, there is "TV Tuner"option below "Settings".

Make sure press TV MENU to exit TV menu screen before other operatings.

Menu Adjustment

page16

TV Tuner Adjustment

TV Source

This will help you to select the TV's signal source.

1. Press TV MENU to bring up the TV menu screen.

2. Press / to select "Settings" and press to select "TV Tuner".

3. Press to enter "TV Tuner" menu.

4. Press / to select "TV Source".

5. Press / to select your desired TV source between Antenna and Cable; press OK to

return; press TV MENU to exit.

Menu Adjustment

TV Tuner Adjustment (Continued)

Automatic channel search

Channel auto search finds and memorizes all channels viewable in your area. Select one

between ANTENNA and CABLE before this operation.

1. Press TV MENU to bring up the TV menu screen.

2. Press / to select "Settings" and press to select "TV Tuner".

3. Press to enter "TV Tuner" menu.

4. Press / to select "Auto Search".

5. Press to begin the searching. Wait until the searching ends.

NOTE: The illustrations and on-screen displays in this manual are for explanation purposes and

may vary from the actual operations.

Fine tune

1. Press TV MENU to bring up the TV menu screen.

2. Press / to select "Settings" and press to select "TV Tuner".

3. Press to enter "TV Tuner" menu.

4. Press / to select "Fine Tune".

5. Press to enter "Fine Tune" screen.

6. Press / to tune for a better picture and sound; press OK to return; press TV MENU to exit.

Channel skip

1. Press TV MENU to bring up the TV menu screen.

2. Press / to select "Settings" and press to select "TV Tuner".

3. Press to enter "TV Tuner" menu.

4. Press / to select "Channel Skip".

5. Press / to select between "On" and "Off"; press OK to return; press TV MENU to exit.

Current channel number selection

1. Press TV MENU to bring up the TV menu screen.

2. Press / to select "Settings" and press to select "TV Tuner".

3. Press to enter "TV Tuner" menu.

4. Press / to select "Current Channel".

5. Press / to select a current channel number you want; press OK to return; press

TV MENU to exit.

page17

Page is loading ...

Magnavox 17MD250V-17B User manual

Brand: Magnavox

Model: 17MD250V-17B

Category: DVD players

Type: User manual

This manual is also suitable for

Download PDF

report

Magnavox 17MD250V-17B User manual

This manual is also suitable for

Magnavox 17MD250V-17B User manual

Related papers

Other documents