防水膠布加工
使用步驟
Waterproof tape
加工步驟
將防水膠布沿接縫處包覆
端子接縫處
防水膠布
1. 將防水膠布的紙片撕起
2. 將膠布伸展，以增加它的黏性。
(請輕拉以免拉斷!)
3. 將防水膠布延著端子接縫處纏繞包覆
(請輕拉以免拉斷!)，包覆完成後，
再以手指於防水膠布上按壓，
增加緊實密合。
4. 完成示意圖
H51VHB01002012 DEC V1.0
Working process
Wrap the tape along the connector junction area
Connector junction area
Waterproof tape
1. Tear the paper from waterproof tape
2. To stretch out the waterproof tape a
little bit for better stickiness
(Be pull gently)
3. To wrap the water tape along the
connector junction area (Please pull
gently). After wrap is completed, and
then push down on the tape to increase
integrated closely.
4. Completed as below photo showed.
(Attached as accessories
with vehicle camera)
Waterproof tape
working process
Apply to the vehicle camera and DVR
connector junction, when exposed in the
outdoor environment, increase its
water-resistance.
適用於車用攝影機、DVR等端子接合處，當
曝於室外環境時，可增加其防水性
Vehicle and DVR connector junction
防水膠布
攝影機/DVR 端子連接
(隨攝影機組件附上)
www.vacron.com
/